P1210 Portable Heat Press Machine User Guide

P1210 Portable Heat Press Machine

Specifications

• Product Name : Portable Heat Press Machine
• Item No.: P1210/P1010/P0708
• Highest Temperature: 999S
• Rated Voltage : 220V- / 110V-
• Rated Frequency : 50-60Hz
• Rated Power : 1000W / 800W
• Length of the Cable : 2M

Start Here

Warnings must be followed carefully to avoid body injury.
Transfer Parameter(for reference)

Main parameters

Feature commentary

POWER BUTTON

1. Press and hold for 3 seconds, power on.
2. Press and hold for another 3 seconds. Shutdown.
3. A short click, Countdown starts.
4. Short press again, Reset.

REDUCE

1. Long press for 5 seconds, Set automatic shutdown time

SETUP

1. Click it once, Set time. Click again and set the temperature.
2. Long press for 5 seconds, ‡ 30 °C temperature difference correction.

VIBRATION PUMP SETTINGS

1. Press the on-off key to enter the countdown state. Press the plus and minus keys to adjust the pump position

• Temperature conversion
• Fahrenheit~Celsius

MACHINE ACCESSORIES (The following are optional accessories)

CLOTHING HEAT TRANSFER

warning: Accessories will vary according to the model the customer selected, pictures for reference only.

Accessories installation diagram

MUG HEAT TRANSFER
(This function is only suitable for P1210/ P1010)

CAP HEAT TRANSFER
(This function is only suitable for P1210/ P1010)

THERMAL TRANSFER PLATE
(This function is only suitable for P1210/ P1010)

Main spare parts

1. Silicone pad
2. Tray
3. Hot plate
4. Middle cover
5. Top cover
6. Touchpad
7. Handle
8. Aviation connector

Guarantee

The products are strictly based on the Consumer Protection Law of the People’s Republic of China and the Product Quality Law of the People’s Republic of China. The services are as follows:
Within 12 months, this product has the performance failure listed in the “Product Performance Failure Table”.
It is confirmed by SUNMETA and can be used for maintenance service free of charge. If out of validity, damage caused by force majeure, or human causes, the machine is not covered by the warranty, repair in charge.

Safety instruction

Before operating this unit, please read these instructions completely and save them

Notice

• Keep unplug when moving the machine
• Keep unplugged when installing accessories
• Place on a flat and stable platform and operate under ventilated conditions
• A Wear special protective equipment when operating the machine

Warning

• Improper use may result in electric shock, fire, personal injury and other damage.
• Do not use this machine in a hazardous location
• Do not use when the machine is not working properly.
• Do not allow children or adults who do not understand this manual to operate this machine.
• Do not disassemble and repair this machine.
• Do not use an unsuitable AC outlet.
• Do not touch the heating plate when the machine heating.

warranty content
Product Performance Failure Table

Electrical schematic diagram

Circuit Board Wiring Method

FAQ

• Q: What should I do if the machine malfunctions within the warranty period?
  • A: If the product experiences performance failure listed in the Product Performance Failure Table within 12 months, it is eligible for free maintenance service by SUNMETA. Contact customer service for assistance.
• Q: What precautions should I take when operating the machine?
  • A:
  • Keep the machine unplugged when moving or installing accessories.
  • Operate on a flat and stable platform under ventilated conditions.
  • Wear special protective equipment during operation to prevent injuries.
• Q: What is not covered under warranty?
  • A: Damage caused by force majeure, human error, or if the warranty period has expired is not covered by the warranty. In such cases, repairs will be chargeable.

References

• AM.CO.ZA® Achievement Matters, CNC Machinery, Spare-Parts, Consumables & Materials 2024 - AM.CO.ZA® Achievement Matters, CNC Machinery, Spare-Parts, Consumables & Materials

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>