RECCI REP-W66 TWS Wireless Earphone User Manual

RECCI REP-W66 TWS Wireless Earphone

Product structure

Wireless pairing

1. Open the charging box, take out the earphone, and the earphones will turn on automatically/ press and hold the multi-function touch button for 3 seconds to turn on the earphone, and the earphone indicator light will be on.
2. Earphones that have been connected to the device will automatically enter the pairing mode after powering on (and trying to connect back to the Searching for -bile, ice) pen wireless interface on the mobile phone, “, click pairing, and there has a prompt tone when connecting successfully.

Power on / off

Power on

1. Open the charging box, take out the earphones, and the earphones will turn on automatically, earphones are automatically paired and waiting for connection.
2. Long press the earphone for 3 seconds to turn it on.

Power off

1. When connecting the phone, put the L/ R earphones into the charging box. The earphone shuts down and starts charging (L or R).
2. The earphone turns on and automatically shuts off for 3 minutes when no device is connected.
3. Long press the earphone for 5 seconds to turn it off.

Call usage

When using the call function, the L/ R earphone can perform the following operations:
Answer: double-click the multi-function touch key.
Hang up: double-click the multi-function touch key.
Reject: press and hold the multi-function key touch area for 2 seconds.

Wake up voice assistant function (if your phone supports this function)
In the music playing or pause state, long press the multi-function touch key for 2 seconds to release it to start the voice assistant function (Siri).

Music use

• Music pause/play: when connected/played, double-click the left/right ear multi-function touch area (L or R).
• Previous song: when music is playing, triple-click the left ear multi-function touch area (left ear L).
• Next song: when music is playing, triple-click the right ear multi-function touch area (right ear R).
• Volume up: when music is playing, click the right ear multi-function touch area (right ear R).
• Volume down: when music is playing, click the left ear multi-function touch area (left ear L).

Charging indicator light

1. Use a USB cable to charge the charging box:

   • Charging: the red light flashes.
   • Charged fully: the red light is always on.
     Low power: the white light flashes in a low-power state.

2. Earphone charges automatically when put into charging box:

   • Charging: the red light is always on.
   • Charged fully: the light extinguishes.

Attention

1. The main earphone serves as an uninterrupted bridge between the auxiliary phone and the mobile phone. Normally, the power consumption is greater than that of the auxiliary phone.
2. The Apple mobile phone displays the internal battery level of the host in real time.
3. The wearing method is very important to avoid the signal antenna being blocked by the inside of the ear. Please wear it according to the wearing method on the introduction page.
4. In binaural mode, covering either earphone with your hand will cause poor signal. This is the case with current technology earphones because using your hands is equivalent to blocking the signal connection between the two earphones.
5. In binaural mode, there must not be too many interfering obstacles between the earphones and the main earphones (R earphones), and the distance between the two needs to be ensured so as not to affect the communication between the mobile phone and the main earphones (R earphones). Signal transmission.
6. In binaural mode, it is normal if the secondary earphone (L earphone) has occasional disconnection problems. After all, it is a wireless signal transmission, just like the WiFi network. Sometimes it is unstable, which is normal. At this time, the signal transmission happens to be interfered., please wait a moment or change the position to solve the problem.

Warning

• Never use corrosive cleaning agents to clean this product.
• Never allow this product to be heated or near a fire source. Never leave this product in direct sunlight for long periods.
• Never dispose of this product in the fire to avoid an explosion.
• Do not attempt to make any modifications to this product as it does not contain any modifiable components.
• Never use this product in the rain.
• If you do not use this product for a long period, please store it in a dry environment and charge the headset at least once a month to extend its life and avoid extreme temperatures and dust.
• You must choose a qualified charger made by a regular manufacturer to charge the headset. This product complies with FCC Article 15 regulations.
• Operation is subject to the following two conditions: (1) This device may not cause undesired interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FAQ

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interterence to radio communications. However. there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help

NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>