RECCI REP-W81 Semi In Ear Design Wireless Earphones Instruction Manual

RECCI REP-W81 Semi In Ear Design Wireless Earphones

Product structure

1. Charging box indicator light
2. Type-C charging interface
3. Multifunctional touch area
4. Earphone speaker

Wireless pairing

1. Open the charging compartment and remove the earphones. The earphones will automatically turn on .
2. After connecting the earphones of the device, it will automatically enter pairing mode upon startup (and try to connect back to the last connected phone); Open the wireless interface of the phone, search for “REP-W81” and click pairing. The connection is successful and accompanied by a prompt tone.

Power on / off

Power on:

1. Open the charging compartment and remove the earphones. The earphones will automatically tum on and pair up, waiting for connection.
2. Press and hold the multi-functional touch area for 3 seconds to tum on the device.

Shut down:

1. Place the UR earphones into the charging compartment, tum off the earphones, and start charging (any L/R).
2. Press and hold the multi-functional touch area for 5 seconds to tum off the device.
3. When the earphones are tumed on and the device is not connected, they will automatically turn off after 3 minutes.

Call usage

When using the call function, the L / R earphone can perform the following operations:

• Answer : click the multi-function touch key.
• Hang up: double click the multi-function touch key.
• Reject : press and hold the multi-function key touch area for 2 seconds.

Wake up voice assistant function
(if your phone support this function) In music playback or pause mode, long press and hold the multifunctional touch area for 2 seconds to activate or deactivate the voice assistant function (Siri).

Music use

• Music pause / play: click the left/right ear multi-function touch area (L or R).
• Previous song: when music is playing, triple-click the left ear multi-function touch area. (left ear L).
• Next song: when music is playing, triple-click the right ear multi-function touch area (right ear R).
• Volume up: when music is playing, double click the right ear multi-function touch area (right ear R).
• Volume down: when music is playing, double click the left ear multi-function touch area (left ear L).

Charging indicator light

1. When charging the charging compartment through a charging cable: Charging chamber charging: The orange light flashes. The charging compartment is fully charged: The orange light is constantly on. Charging compartment low battery: The green light flashes.
2. When the earphones are placed in the charging compartment and automatically charged:
   • Earphone charging: The green light in the charging compartment is always on.
   • Earphone fully charged: The charging compartment light goes out.

Attention

1. The main earphone serves as an uninterrupted bridge between the auxiliary phone and the mobile phone. It is normal that the power consumption is greater than that of the auxiliary phone.
2. The Apple mobile phone displays the internal battery level of the host in real time.
3. The wearing method is very important to avoid the signal antenna being blocked by the inside of the ear. Please wear it according to the wearing method on the introduction page.
4. In binaural mode, covering either earphone with your hand will cause poor signal. This is the case with current technology earphones, because using your hands is equivalent to blocking the signal connection between the two earphones.
5. In binaural mode, there must not be too many interfering obstacles between the earphones and the main earphones (R earphones), and the distance between the two needs to be ensured so as not to affect the communication between the mobile phone and the main earphones (R earphones). Signal transmission.
6. In binaural mode, it is normal if the secondary earphone (L earphone) has occasional disconnection problems. After all, it is a wireless signal transmission, just like the WiFi network. Sometimes it is unstable, which is normal. At this time, the signal transmission happens to be interfered with. , please wait a moment or change the position to solve the problem.

Warning

• Never use corrosive cleaning agents to clean this product.
• Never allow this product to be heated or near a fire source. Never leave this product in direct sunlight for long periods of time.
• Never dispose of this product in fire to avoid an explosion.
• Do not attempt to make any modifications to this product as it does not contain any modifiable components.
• Never use this product in the rain.
• If you do not use this product for a long period of time, please store it in a dry environment and charge the headset at least once a month to extend its life and avoid extreme temperatures and dust.
• You must choose a qualified charger made by a regular manufacturer to charge the headset. This product complies with FCC Article 15 regulations. Operation is subject to the following two conditions: (1) This device may not cause undesired interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FAQ

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>