WELCARE WPA100 Desktop Air Purifier Instruction Manual

June 6, 2024
WELCARE

welcare logo

WELCARE WPA100 Desktop Air Purifier

WELCARE WPA100 Desktop Air Purifier

Model: WPA100

Please keep this instruction manual in a safe place where it is readily available.
Note: The illustrations in this manual may differ slightly from the product itself.

Important Safety Information

WARNING:

Read this section thoroughly before using the product.
Please ensure you observe the safety instructions to avoid accidents, injury and damage.

Intended purpose
The Welcare PureAir Desktop Air Purifier removes contaminants from the air in a room to improve indoor air quality. Indoor air pollution comes mainly from pollen, dust, harmful gasses including smoke, body odour and other substances which can be a serious problem, causing dizziness, drowsiness, congestion, and nausea. Clean pure air is important to a person’s health and wellbeing.

This product is NOT a therapeutic device.
This product is not intended for use by persons (including children) with limited physical, sensory or mental abilities or lacking experience and/or knowledge, unless they are supervised by a person responsible for their safety or have received and understand the instructions/safety warnings for use of the product from this person in advance.

Safety Warnings

  • Keep the product and its components out of reach of children.
  • Keep children away from the packaging material.
  • Dispose of the plastic bag. Keep away from babies and children to avoid suffocation.
  • DO NOT let children play with the product.

Warnings

  • DO NOT drop or put heavy objects on the product.
  • DO NOT allow the product to come into contact with any sharp objects, as this could cause damage to the product.
  • DO NOT attempt to open or disassemble the product.
  • DO NOT expose to temperatures over 55°C.
  • Only use in a 220-240V wall outlet to avoid overheating.
  • If the supplied power cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard.
  •  Clean the product with a damp soft cloth and mild detergent if required. DO NOT use any harsh chemical cleaning agents. Dry with a soft cloth.
  •  Never use liquids such as water, detergents, or flammable solvents to clean the product.
  • When cleaning the product, please disconnect from the power source.
  • This product uses precision components. Please position the product on an even, steady surface to prevent it from falling or being damaged.
  • Keep the space surrounding the product unobstructed. DO NOT cover the air inlet and outlet.
  • Maintain responsible use of essential oil.

Features

  •  360-degree HEPA (H13) filtration
  •  Suitable for desktops and small rooms up to 12.36m²
  • Filter’s dust, pollen, smoke, germs, and bacteria
  •  Removes odours
  •  Adjustable fan speed – 4 Levels (one button)
  • Timing function 1hr – 2hr – 4hr – 8hr
  • Touch panel display for easy operation Sleep mode
  • Filter replacement reminder display
  • Child lock
  • Low-noise operation
  • Aromatherapy function
  •  Lightweight
  • Dust sensor & Air quality indicator (4 colours):
  • Blue-Perfect, Green-Good, Purple-Normal, Red-Bad

Air quality indicator

WELCARE WPA100 Desktop Air Purifier fig 1

Box Contents

  • 1 x Air purifier (including 1pcs HEPA (H13) filter and 1 pair of aromatherapy sponges inside)
  • 1 x Instruction Manual & Warranty Information

Welcare PureAir Desktop Air Purifier Components

WELCARE WPA100 Desktop Air Purifier fig 2 WELCARE WPA100 Desktop Air Purifier fig 3

Welcare PureAir Desktop Air Purifier Display

WELCARE WPA100 Desktop Air Purifier fig 4

Before Using the Air Purifier

  • Before turning on the product for the first time, remove the filter bag.
  •  Carefully remove all packaging materials and keep the enclosed documents in a safe place.
  • Keep the packaging, product, and its components out of reach of children.
  • Check the product is intact. DO NOT use if broken.
  •  Remove the protective film from the screen.
  • Plug the product into the power source.

If any abnormalities are detected, please contact our service centre: In Australia – 1800 807 464
In New Zealand – 0800 523 583

Air Purifier Filter Installation

  1.  Hold the bottom cover rotation handle. (figure 1.)

  2.  Turn the bottom cover anti-clockwise to unlock. (figure 1a.)

  3.  Remove the cover.

  4. Remove the filter as shown. (figure 2.)

  5. Remove the plastic bag and put the filter back into the unit.
    aDispose of the plastic bag. Keep away from babies and children to avoid suffocation.

  6. Place the filter back into the unit.

  7. Place the bottom cover back in the unit.

  8. Rotate the bottom cover clockwise to lock into place. ( figure 1b.)

WELCARE WPA100 Desktop Air Purifier fig 5

Aromatherapy Function

  • Remove the bottom ( figure 1a.)
  • There are two sponges attached to the inside of the bottom cover of the machine (as shown by the arrow in figure 3 )
  • Add several drops of your preferred essential oil onto each of the sponges
  • When the air purifier is operating, the scent will slowly emit with the breeze

WELCARE WPA100 Desktop Air Purifier fig 6

Replacement Accessories:

Replacement accessories can be purchased online or by contacting us directly:

Australia: 1800 807 464 www.welcare.com.au

New Zealand: 0800 523 583 www.jadavey.co.nz

Part Code Part Name
FIL1207 3 IN 1 Filter – Pre-filter, HEPA filter (H13), Activated carbon

filter
AP1207SP-AS| Aromotherapy Sponges

Using the Air Purifier

Standby:

Insert the plug of the air purifier into a power source. The buzzer will sound, and all the indicators will light up. After three seconds, the air purifier will be in standby mode. The “power button” indicator lights up in RED.

Please note: no other icons will light up.


Power On/Off:

Tap the top power icon to switch the power on. Tap again to switch the power off. The default fan speed is low, and the child lock is off.

Fan Speed Function:

Tap the fan speed adjustment icon to choose fan speed – Low  TO  High Auto Sleep


Sleep Mode:

When the sleep function is activated, the indicator lights will turn off except for the sleep icon which will remain fully illuminated. The power and fan speed icons will remain illuminated at half brightness.

Child Lock:
Press the icon for three seconds to switch the child lock on/off.
If the icon light is continuous, the child lock function is turned
If the icon light is flashing, the child lock function is turned

Replace the Filter:

When the filter has been used for approx. 2,000 hours, the replacement filter indicator light will flash, and the buzzer will beep.

After replacing with a new filter, hold the filter reset icon for three seconds until the light fully illuminates and no longer flashes. At the same time, the buzzer will stop sounding. This button can also be used to turn the air quality indicator lights on and off (by pressing once).


Timer Function:

Touch the timer icon, adjust the countdown shutdown time 1hr  to  2hr  to  4hr 8hr. The sequence will then loop.

Note: If no timer is set, the air purifier will continuously operate until it is manually switched off.

Cleaning and Maintenance

  • When cleaning, always turn off the power and disconnect from the power
  • Clean the product with a damp soft cloth and mild detergent if required
  • Dry with a soft

Storage

  • DO NOT use any harsh chemical cleaning agents
  • Wipe away any dirt and dust from the products
  • Store in a safe cool dry place, away from children as per Safety warnings
  • DO NOT place any heavy objects on the products

Troubleshooting

Problem Possible Cause Solution
The Air Purifier does not turn on. The machine plug and power plug are not
inserted into the power source correctly. ****

Insert into the power source correctly.



The fan does not work.

| The product inlet or outlet may be blocked.| ****

Remove any objects away from the inlet/outlet area.

Remove any plastic packaging from the filter.

Plastic packaging may not have been removed.
Performance is poor or is not performing at its optimal purification performance.| The area around the product is not clear of objects.| ****

Remove any objects around the unit.

Replace the filter as per instructions.


Filters may need replacing.

The product beeps.| ****

Filters requiring  replacement.

| Replace the filter as per instructions.


Air quality indicator is always red.

| ****

There is a continued source of pollution near the product such as smoke.

| Remove source of pollution, then the air quality indicator

will change colour as air quality improves.

If the problem is not solved by the troubleshooting guide or you have any queries, please contact our service centre:

In Australia – 1800 807 464
In New Zealand – 0800 523 583
DO NOT attempt to open or repair the product yourself

Warranty Information

PRODUCT WARRANTY

Please register your warranty information at:  AUS – www.welcare.com.au

NZ – www.jadavey.co.nz

This Welcare PureAir product is warranted to be free of manufacturing defects for 1 year from the date of purchase*. This warranty is void if the product is modified or altered, is subject to misuse or abuse, damaged in transit or lack of responsible care, is dropped, if damage occurs by reason of failure to follow the written instruction booklet, or if product repairs are carried out without authority from J.A. Davey Pty Ltd.

We will repair, or at our option replace free of charge, any parts necessary to correct material or workmanship, or replace the entire product and return to you during the period of the warranty. Otherwise, we will quote for any repair which will be carried out on acceptance of our quotation. The benefits conferred by this warranty are in addition to all other rights and remedies in respect of the product, which the consumer has under the trade practices act and other state or territory laws in Australia and New Zealand.

Our goods come with guarantees that cannot be excluded under Australian and New Zealand Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

*Please note the accessories are not covered under warranty.

BEFORE YOU SEND IN YOUR UNIT FOR SERVICE

Before sending in your product for service, please take a few minutes to do the following:

  • In your instruction manual, read the troubleshooting section that describes common errors, their cause and Product instruction manuals can be downloaded online.
  • Contact Welcare customer Our staff are trained to assist you with most issues you may have experienced, without the need to send your product in for service.

PLEASE CALL OUR TOLL FREE NUMBER:

IN AUSTRALIA:                          IN NEW ZEALAND:

Free call: 1800 807 464             Free call: 0800 523 583

SENDING IN YOUR UNIT FOR SERVICE

  1. Should repair be needed within the warranty period, enclose the cut-off section of the warranty form and your proof of purchase Please ensure all relevant details are completed before sending your unit in for service. Please ensure your contact details are still current and include a brief description of the problem you are experiencing together with your purchase receipt.
  2. Include the unit with all product components in your This is extremely important, so our repair technicians can make the correct diagnosis with any problems.
  3. Please return the product and warranty form at your cost to:

IN AUSTRALIA

J A DAVEY PTY LTD
Welcare Repairs PO Box 84
Port Melbourne Victoria, Australia 3207

IN NEW ZEALAND
BV Medical Welcare Repairs
Unit 7, 110 Mays Road Onehunga
Auckland, New Zealand 1061

Warranty Form

PLEASE RETAIN THE WARRANTY INFORMATION.

RETURN THIS PORTION ONLY WHEN YOU RETURN YOUR PRODUCT FOR REPAIR UNDER WARRANTY.

  • NAME
  • ADDRESS
  • POSTCODE:
  • DAYTIME PHONE
  • EMAIL
  • MODEL:
  • DATE OF PURCHASE:
  • PLEASE ATTACH PROOF OF PURCHAS
  • RETAILER’S NAME
  • RETAILER’S ADDRESS
  • POSTCODE
  • BRIEF DESCRIPTION OF PROBLEM YOU ARE EXPERIENCING:

WARRANTY IS VOID UNLESS THE ABOVE INFORMATION IS COMPLETED AND CORRECT.

Technical Data

Product Name Welcare PureAir Desktop Air Purifier
Model Number WPA100
Power 30W
Input AC220-240V/50HZ
Coverage Area 12.36m2
CADR 103m3/h

Purification System

| 3 IN 1 Filter – Pre-filter, HEPA filter (H13), Activated carbon filter
Noise| 55dB(A)



Operating Conditions

| Temperature: 0˚C to 40˚C

Humidity: ≤70% RH (non-condensing) Atmospheric  Pressure: 860hPa-1060hPa


Storage/ Transport Conditions

| Temperature: -10˚C to 55 ˚C

Humidity: ≤90% RH (non-condensing) Atmospheric  Pressure: 860hPa-1060hPa

Dimensions| 225x225x310mm (out of packaging)
Weight| Approx. 2.5Kg (main body)
Materials| ABS + PP


Contents

| Air purifier (including 1pcs HEPA (H13) filter and 1 pair aromatherapy sponges inside), Instruction Manual & Warranty Information

Should you require any further information please do not hesitate to contact us.

IN AUSTRALIA:

J A DAVEY PTY LTD

Telephone: 1800 807 464 Website: www.welcare.com.au

IN NEW ZEALAND:

J A DAVEY LTD

C/- Healthcare Logistics Telephone: 0800 523 583 Website: www.jadavey.co.nz

Disposal

At the end of its life, please treat this product as electronic waste and dispose of responsibly according to current local regulations.

Made in China

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals