MINEW DS021 2.13 Inch Ultra Thin ESL Electronic Shelf Label Owner’s Manual
- July 3, 2024
- MINEW
Table of Contents
MINEW DS021 2.13 Inch Ultra Thin ESL Electronic Shelf Label
Specifications
- Model: 0SFP$IPDPMBUF4BOEXJDI$PPLJFT
- Brand: FODVVLFLDYRU
- Compatibility: OFU85H.BEFJO*OEJB
Product Information
The product 0SFP$IPDPMBUF4BOEXJDI$PPLJFT is a high-quality device designed for a range of applications. It offers compatibility with OFU85H.BEFJO*OEJB and features innovative technology for optimal performance.
Usage Instructions
Step 1: Unboxing
Open the packaging carefully and remove the product along with any
accessories included.
Step 2: Setup
Follow the provided user manual to set up the product correctly, ensuring
all connections are secure.
Step 3: Operation
Power on the device and familiarize yourself with the controls. Refer to
the user manual for specific functions and features.
Frequently Asked Questions (FAQ):
-
Q: What should I do if the device does not power on?
A: Make sure the power source is connected properly and try using a different outlet. If the issue persists, contact customer support for assistance. -
Q: How can I troubleshoot connectivity issues?
A: Check all cables and connections to ensure they are secure. Restart the device and the connected components. If problems persist, refer to the user manual troubleshooting section or seektechnical support.
Great Power in the Ultra-Slim Body
2.13-inch Ultra-thin ESL DS021 SPECIFICATION
Datasheet
V1.0 Publish Date:8.2023
DS021
BRIEF INTRODUCTION
DS021 is a 2.13-inch super-thin ESL independently developed by MinewTag,
utilizing the latest Bluetooth® Low Energy 5.0 Technology. It features a 9.4mm
ultra-thin design, secure and fast data transfer, and agile, flexible screen
refresh. Adopting the latest E-ink display technology, DS021 provides a fully-
graphic display and paperlike appearance. With the 2.5D transparent shell, it
delivers a nearly 180° viewing angle for excellent readability.
HIGHLIGHT
SPECIFICATION
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Address: Building I, Gangzhilong Science Park, Qinglong Road, Longhua
District, Shenzhen, 518109, China
Phone: +86(755)2103 8160
Email: [email protected]
Website: https://www.minewtag.com
