LG 32GS95UE-B OLED Gaming Monitor Instruction Manual
- July 2, 2024
- LG
Table of Contents
Instruction Manual
Dismantling information
The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of LG products to remove components and materials requiring selective treatment.
Product Identification
| Type of Product | Monitor |
|---|---|
| Model name | 32GS95UE-B |
32GS95UX
Displays must be stored in accordance with the requirements stipulated in Appendix VIII (1) or (2) of Directive 2012/19/EU and must, amongst other things, be stored in a weatherproof manner. Containers with covers must be used when storing and transporting the Displays.
Contents
- Materials and components for Selective Treatment
- Tools Required
- Product Disassembly Process
- Disassembly of External enclosure
Materials and components for Selective Treatment
Displays may contain hazardous substances like Pb and BFRs which are covered by exemptions under the RoHS directive. However, the majority is present in the PCB assembly. In order to reduce emissions as much as possible, a complete disposal of the old appliance is required. This treatment may only be performed in authorized handling plants.
| Materials and components | Notes | Included | Location |
|---|---|---|---|
| Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) | With a | ||
| surface greater than 10 square cm | |||
| Batteries | For Remote control | ||
| Internal batteries | |||
| Mercury containing components | display backlights | ||
| Liquid Crystal Displays (LCD) with a surface greater than 100 square cm | |||
| Includes background illuminated displays with gas discharge lamps | |||
| Capacitors / condensers (Containing PCB / PCT) |
Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter
or height| | |
External electric cables cords| Power cord| |
Signal cable| |
Gas Discharge Lamps| | |
Plastics containing Brominated Flame Retardants| | |
Components and waste containing asbestos| | |
Components, parts and materials containing refractory ceramic fibers| | |
Components, parts and materials containing radioactive substances| | |
Tools Required
List the type that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
| Tool Description | Tool information |
|---|---|
| Screw driver | |
| Nipper | |
| Plastic Hera Jig |
Product Disassembly Process
-
Batteries
No battery -
PCBs and LCD Module
Detach Monitor head and stand by one-click button.
Set-up the Monitor head with the
back-cover is pointing upside.
Remove screws 5ea to disassemble the
back cover. (Tool set up : “+”tip screw driver)
Remove the back cover. (Tool set up
: Plastic HERA JIG)
Disassembly the Lighting cable 2EA
Disassembly the Lighting Cover
Disassembly the Cables
Remove the screw 4ea
Remove the woofer 2ea
Remove the screw 16ea
The picture of module.
Remove screws 6ea and disassembly
the control bracket and PCB
Remove screws 5ea and disassembly
the FAN -
Power cord and signal cables
A Power cord plugged into the back of the display can easily be removed by hand or cables are provided as de-attached from the product
Adapter, Power Cord, HDMI Cable, DP
Cable, USB Cable -
Capacitors > 25 mm
Capacitors > 25 mm are located in the power supply units and can be removed by nipper
Disassembly of External enclosure
Detach Monitor head and stand by one-click button.
Set-up the Monitor head with
the back-cover is pointing upside.
Remove screws 5ea to
disassemble the back cover. (Tool set up : “+”tip screw driver)
Remove the back cover. (Tool
set up : Plastic HERA JIG)
Start Point
Disassembly the Lighting cable 2EA
Disassembly the
Lighting Cover
Disassembly the Cables
Remove the screw 4ea
Remove the woofer 2ea
The picture of module.
Remove the screws 21ea
Disassembly the LED PCB Ass’y
Remove the screws 3ea
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>