BEMIS HH115 Single Hinge Installation Guide
- June 30, 2024
- BEMIS
Table of Contents
BEMIS HH115 Single Hinge Installation Guide
Product Specifications
- Tools Needed: 5/8 (16 mm) wrench
- Cleaning Instructions: Clean only with mild cleaners using a soft, damp cloth, & towel dry.
- Contact for Support: 888.722.6488 | ToiletSeats.com
Product Usage Instructions
Installation
- Finger tighten component (B) to the underside of the bowl.
- Adjust the seat front to back for proper fit.
- Hold the seat centered on the bowl and tighten component (B) until lower portions snap off to prevent over-tightening.
Care & Cleaning
Use mild cleaners with a soft, damp cloth to clean the product.
Towel dry after cleaning. Avoid harsh chemicals like bleach.
Removal
To remove, use any 5/8 wrench to loosen the nut.
Tools Needed
5/8″ (16 mm)
Hardware Kit Includes
Installation
- Remove hinge cap (C).
- Insert (A) with arrows as shown.
- Place seat on bowl.
- Finger tighten (B) to the underside of the bowl.
- Adjust the seat front to back for proper fit.
- Holding the seat centered on the bowl, tighten (B) until lower portions SNAP OFF to prevent over-tightening and will NEVER LOOSEN.
- Firmly push (C) onto the hinge.
Care & Cleaning
NO HARSH CHEMICALS
Clean only with mild cleaners using a soft, damp cloth, & towel dry.
REMOVAL
Remove the nut with any 5/8″ wrench
FAQs
Q: Can I use bleach or harsh chemicals to clean the product?
A: No, it is recommended to clean only with mild cleaners using a soft, damp cloth and towel dry.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>