Contemporary Lighting E25089-148BK Burst 12 Light LED Pendant Instruction Manual
- June 29, 2024
- Contemporary Lighting
Table of Contents
E25089-148BK Burst 12 Light LED Pendant
“`html
Specifications:
-
Item/Model Number: E25089-148BK Burst 12-Light LED Pendant –
Mixed -
Lamping | Ampoule: [12] x [G4] [1.8W] (Included)
-
Made in China
Product Usage Instructions:
Installation for Pendant:
-
If you want to use the 0-10V dimming structure, lead wires
should go down to the center body. -
Run wire through stems and combine stem lengths to meet desired
mounting height. -
Refer to page 6 for connecting the Violet(+) and Gary(-) wires
according to the instruction.
Installation for Semi Flush Mount:
-
If you want to use the 0-10V dimming structure, lead wires
should go down to the center body. -
Follow the instructions on page 6 to connect the Violet(+) and
Gary(-) wires accordingly.
FAQ:
Q: What is the voltage input for the product?
A: The voltage input is 120-277 V AC, 60 Hz.
Q: Can I use any dimmer switch with this product?
A: This fixture must be installed with a compatible dimmer
switch. Verified list of tested drivers include Lutron DVCL-153P,
Lutron SCL-153P, Leviton IPLO6, Leviton 6674, Deako Simple
Dimmer.
Q: What is the wattage limit for dimmer compatibility?
A: Due to inrush current, wattage should not exceed 150W on a
600W dimmer.
“`
o n t e m p o r a r y L i g h t i n g
Item/Model Number: E25089-148BK Burst 12-Light LED Pendant – Mixed
Lamping | Ampoule: “[12] x [G4] [1.8W] (Included)”
Please consult a qualified electrician prior to install
Veuillez consulter un électricien qualifié pour suspendre le luminaire et le câblage.
Made in China | Fabrique en Chine | Hecho en China
1 of (6)
/(‘/2:92/7$*(,16758&7,216
Z’^ & Z Z Z
ZZZZ Z
tZZZZ ZZZ ZZ
Z Z
Z Z
ZZZZZ ZZZ ZZZ
ZZZ ZZ
Z ZZ
ZZ ZZZZZZ ZZZZ
ZZZZZZ ZZZZ
<ZZ Z
ZZZZ Z
ZZZ Z
dZZ ZZZZ
ZZZZ ZZZ
Z Z ZZ < Z
ZZ ZZ
DZ ZZZ
ZZZ Z ZZ
Z Z Z Z Z Z
WZZZZ ZZZZZZ
Z Z ZZ
ZZZZZ ZZZ
dZZZ ZZZZ
EZZZ ZZ EZZ
Z dZ
EZZZZ ZZZZ
EZZZZZZ
ZZ ZZ D Z Z Z Z
/Z
ZZ ZZ
ZZZ ZZZZZ Z
^ZZZZZZ Z
KZZZ Z
ZZZZZ
tZE/E’tZZZZ ZZZZ ZZZZ
Z Z ZZ
/Z>
ZZZ ZZZ
WZZZZ Z ZZ
ZZZ
WZZZ Z
Z Z
Z ZZ
E Z ZZ ZZZ
sZd/^^DEd>ZZ ZZZ ZZ
^ZZZZZZZ Z Z
EZZZ ZZZ
sZdE/>Z ZZZZZZ ZZ
D
K Z Z Z Z Z
&ZZ ZZZZ Z
ZZZZ Z
WZ
EZD
^ZZZZ
WZ Z Z Z Z Z Z
EZZZZ EZ
WZ Z Z Z Z
DZ
Z Z Z ZZZ Z Z
WZZ Z ZZ Z ZZZ
hZZZZ ZZZ
W Z ZZ Z
WZZZZZ ZZZZZ
^ ZZ ZZ Z Z Z Z ZZZZ
ZZZZ Z ZZZ
RI6
Eng PARTS
Before getting,started,ensure the package contains the following components:
Fra PIÈCES
Esp PARTES
Antes de comenzar, asegurese de que el paquete Avant de commencer,assurez-vous qu le
contenga los siguientes componentes:
paquet contient les composants suivants:
H
x1
STR06206BK-NK 1PCS
A
x1
STR06212BK-NK 3PCS
I
x12
BL1-8G4CL12V30(Included)
1.EGLS25084-54 2PCS
B
x1 J
x8 2.EGLS25084-18 2PCS
3.EGLS25084-142 2PCS
4. EGLS25084-05 2PCS
1.EGLS25087-54 1PCS
C
x2 K
x4 2.EGLS25087-18 1PCS
3.EGLS25087-142 1PCS
8-32 x 1.25″
4. EGLS25087-05 1PCS
D
x3 L
x1
CV
E
120-277V 12 V or 2500 mA
x1 M
5 ” L . 2.36 ” W . 1.06 ” H
x1
F
x1 N
x2
8-32 x1/2″
G
x1
3 of (6)
Install For Pendant
H F G B(Ring
If you want to use the 0-10V dimming structure, you need to have lead wires go
down to the center body.Read the page 6, connect the Violet(+) and Gary(-)
wires according to the instruction.
E (LED DRIVER)
A
0.75″
I
7″ J
0.5″
5″ K
1. Run wire through stems and combine stem lengths to meet desired mounting height.
G
4 of (6)
Install For Semi Flush Mount
L A E(LED DRIVER)
If you want to use the 0-10V dimming structure, you need to have lead wires go
down to the center body.Read the page 6, connect the Violet(+) and Gary(-)
wires according to the instruction.
0.75″
I
7″ J
0.5″
5″ K
5 of (6)
o n t e m p o r a r y L i g h t i n g
ITEM/MODEL: E25089-148BK
WIRING DIAGRAM
M UST be installed by an experienced professional CRITICAL KNOWLEDGE of elect
ronic lighting systems required
IM PROPER WIRING and/ or INCORRECT DIM M ER use can cause CATASTROPHIC DAM AGE! THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH DO NOT CUT FACTORY-MADE CONNECTIONS.
VOLTAGE INPUT
120- 277 V AC, 60 Hz
WHITE (N)
BLACK (L)
Black White
27 (mm)
CV 120-277V 12 V or 2500 mA
5 ” L . 2.36 ” W . 1.06 ” H 127 (mm)
Rod
PVD30-C250V12-UNV4-HE-P
+ –
Black (-)
Red (+)
FACTORY CONNECTIONS (+) INNER CONUCTOR l OUTER M ESH (-)
SCHEMATIC FOR GENERAL REFERENCE ONLY
VERIFIED LIST OF TESTED DRIVERS
GENERAL COMPATIBILITY
Lut ron DVCL-153P Lut ron SCL-153P Levit on IPLO6 Levit on 6674 Deako Simple Dimmer
TRIC / FORWARD PHASE ELV / RECERSE PHASE 0-10V / LOW VOLTAGE W iFi / WiZ Connect ed
Due t o inrush current , w attage should not exceeed 150W on a 600W dimmer
IMPORTANT!
If t he cont rol is not paired properly to LED fixt ures, irreparable damage
may occur.
If the dimmer you are using is not list ed here, consult a light ing
professional or view our Dimming Compat ibility Chart online: w w w
.et2online.com
2023 ET2 CONTEMPORARY LIGHTING
6 of (6)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>