Niche S6 Smart Charger User Manual

Niche S6 Smart Charger User Manual

It has been designed for simple operation. Itis very easy to use. |ESEESHUPEIEEEE Theplug angle can be manually adjusted in a certain range, so that the camera direction is adjustable as well. If you don’t want to read the User Manual, that’s no problem. Please visit the following link to see its Tutorial Videos directly. www.niche168.com

Note:
It supports Micro SD card up to 256 GB Class 10 or UHS (256GB SD Card is not included in the scope of supply).

This hidden camera has no sound recording function because US law prohibits the sale, owning and use of hidden voice recording devices. At the same time, Amazon is not allowed to sell such items with audio Recording function.

Overview of the camera

Please remove the protective film before use, the protective film is very thin.

How to adjust the angle of view of the camera

The direction of the camera could be manually adjusted, because the plug angle can be adjusted i a certain range. You can also use an Extension cord, Swivel wall tap outlet power splitter, Wall tap with adapter spaced outlets to have more flexible angle of view.

Portable Use

The camera can work from a power bank, USB port charger. Connect your camera by the Male-Male USB cord to the power source.
Note: Male-Male USB means the Double USB Cable in the package.

Correct Way to Mount the Camera

Make sure the USB Port is down as shown

Quick Set up
Please follow the below steps to use the camera

EASY T SE

1. Remove the protective film before use.

2. Open the front cover.

3. Insert micro SD card into the camera.

4. Choose a recording mode
   L: Continuous Mode
   M: Motion Detection Mode

5. Close the cover.

6. Plug it into a socket or a power bank.

7. Manually adjust the camera direction.

Note: If you forget to put in your Micro SD card into the camera, the red indicator light will quickly flash for 10 times to remind you that a Micro SD Card is missing or not being inserted properly. Please make sure that you don’t forget to put in your Micro SD card into the camera and make sure you insert your Micro SD Card properly.

How to edit the date and time Stamp

Step 1: Put your Micro SD Card into the camera, Plug the camera into an outlet for 1-5 minutes The camera will automatically create a file with settings “Time” in the Micro SD Card.
Step 2: Unplug the camera, take out your Micro SD Card from the camera, insert your Micro SD card into the SD card reader, and plug the SD card reader to your computer.

Step 3: Open the text file “Time”, Revise the time & date as you need.

Means
HH: MM MONTH-DATE YEAR 20:38 p.m. June 29th, 2021
Y means: show time and date stamp in the video. This is 24 hours format. To turn off the time and date stamp, change the Y into N, N means: Don’t show time and date stamp in the video. For example: 20:38 06-29-2021 N

If you Change Y into N, and save the-, then the time and date stamp will not show in your newly recorded videos.

Note: After revising the time and date, don’ t forget to save the [“time” file. The changes you made in the “time” file will only take effect on the new videos you are going to record, not on the videos you have already recorded.

Two Different Recording Modes

(Check Image 1 to see where L and M are located)
Continuous recording mode:
~ Switchto L Motion detection recording mode: ~ Switchto M

This switch is located on the rear panel of the camera. When the card is full, loop recording will begin. In both “L” and “M” settings, when Your Smart Charger has reached its maximum memory capacity, it will automatically record over the earliest video files in the looping mode.

How to watch the recorded videos

There are two different methods to watch the recorded
videos
Method 1 (This Method is much preferred)

1. Eject the Micro SD card from your camera. Click on the Micro SD card and it will spring out.
   Note: To avoid potential corrupted videos, after you unplug the camera from the power source, please wait for 1-5 minutes before you actually eject the Micro SD Card.

2. Put the Micro SD card into the Micro SD card reader.

3. Connect the Micro SD card reader to your computer.

4. Find a flash disk and copy files to your computer. Start watching videos on your computer

Method 2 (Use the Double USB Cable to connect camera and computer) To avoid peeling off the front panel and take out the Micro SD card every time, you can also connect the camera toyour computer by using the Double USB cable. In this way, you can watch the recorded videos as well.

When Smart Charger is connected via the USB port to your computer, the charger will pop up as icon of Removable disk. A blue light shows that the USB device is ready for data transmission. Then you can easily copy, cut and paste or delete files.

Note: If the computer does not recognize the Smart Charger, or if the removable disk is not detected after 30 seconds, please reconnect device for prompt response or try it on another computer. (We highly recommend that you always use Method 1 to watch videos)

Best Media Players for watching

Recorded Videos

Warning!!! Please note it before use

1. Do not use the camera for illegal purposes.
2. Use it for lawful purposes only. Please strictly abide by relevant laws, as the product cannot be used for any illegal purposes. The manufacturer and seller will not be held responsibility if you break any laws using this device.
3. Make sure that the electric socket and the housing of this device are in good condition and gently insert/pull out the device from the electric socket to avoid electric shock.
4. Do not use the camera near an open flame and extreme heat sources.
5. Do not get this into the human body!
6. Do not give this product to children under 16 years old.

For more product setup details, watch Tutorial Videos and Register Product Warranty, please visit our website:

www.nichel68.com
Appreciate for your understanding and great support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>