Soundcore A3936031 Space A40 ANC True Wireless Earbuds User Manual
- June 3, 2024
- Soundcore
Table of Contents
Soundcore A3936031 Space A40 ANC True Wireless Earbuds
SUPPORT
Please visit www.soundcore.com/support for more information
APP
Download the Soundcore app to enhance your experience (Ambient Sound modes, adaptive noise control, HearID Sound, equalizer tuning, custom controls, firmware update, and more).
WEARING
Choose the Ear Tips that fit your ears best and take a fit test in the Soundcore app to ensure you get the best ANC performance.
CHARGING
Fully dry off the earbuds and the USB-C charging port before charging.
For wireless charging, position the charging case at the center of your
wireless charger.
POWERING ON & PAIRING
Open the charging case, the earbuds will automatically power on and enter Bluetooth pairing mode. Select “Soundcore Space A40” from your device’s Bluetooth list when connecting for the first time.
MULTIPOINT CONNECTION
The earbuds can connect with two devices at the same time so you can switch
between them effortlessly.
To pair with another device, wear the earbuds, then press and hold the
touchpad on both earbuds for 3 seconds simultaneously.
Select “Soundcore Space A40” from your device’s Bluetooth list to connect.
MANUAL PAIRING
To manually enter Bluetooth pairing mode, place the earbuds in the charging case and leave the case open. Then press and hold the button on the charging case for 3 seconds until the LED indicators flash white in sequence continuously.
CONTROLS
x2: Tap twice
2s: Tap and hold for 2 seconds
*You can also customize controls in the Soundcore app.
NOISE CANCELLATION
To reduce unwanted ambient noise, select a noise cancellation mode in the Soundcore app.
- Adaptive Mode: Automatically switch to the most suitable noise cancelling equalizer for different user scenarios.
- Manual Mode: Set the level of noise cancellation manually.
TRANSPARENCY
To stay aware of your surroundings while listening to music, select a transparency mode in the Soundcore app.
- Fully Transparent: Hear all ambient sounds.
- Vocal Mode: Voices stand out more clearly from other ambient sounds.
LDAC
Use devices powered by Android 8.0 or later to experience LDAC quality sound.
POWERING OFF
Return the earbuds to the charging case and close the case.
RESET
Place the earbuds in the charging case and leave the case open. Then press and hold the button on the case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence.
SPECs
Specifications are subject to change without notice.
| Input | 5 V __ 0.65 A |
|---|---|
| Rated output power | 2.2 mW |
| Battery capacity | 53 mAh x 2 (earbuds); 800 mAh (charging case) |
| Charging time | 2 hours |
Playtime
(with ANC mode turned off)
| Up to 10 hours (Total 50 hours with the charging case)
Playtime
(with ANC mode turned on)
| Up to 8 hours (Total 40 hours with the charging case)
Driver unit| 10 mm dynamic driver
Frequency response| 20 Hz – 20 kHz
Impedance| 16 Ω
Waterproof level (Earbuds)| IPX4
Bluetooth version| 5.2
Bluetooth range| 10 m / 33 ft
References
- soundcore Headphones & Speakers - Hear it, Feel it - soundcore US
- Soundcore EN
- Anker (アンカー) Japan公式サイト – Anker Japan公式サイト
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>