jaycar SZ1925 6 Way Illuminated Blue Rocker Switch Panel Owner’s Manual
- June 29, 2024
- Jaycar
Table of Contents
jaycar SZ1925 6 Way Illuminated Blue Rocker Switch Panel
Product Information
The SZ1925 is a versatile and user-friendly switch panel designed for easy installation and wiring. With just four connections required, the panel comes prewired for convenience. It features switches rated at 20A for a 12V system and 10A for 24V systems, with a maximum panel rating of 45A. The LED illumination is powered separately, allowing for flexible control through a switch or dimmer.
Specifications
- Switch Rating: 12VDC @ 20A, 24VDC @ 10A
- Panel Rating: 45A
Product Usage Instructions
Installation
- Identify the four required connections: -VE(BATTERY), +VE(BATTERY), -VE(LOAD), and +VE(LOAD).
- Ensure the panel is securely mounted in a suitable location within reach.
- Connect the identified wires to their corresponding terminals on the panel.
- Double-check all connections for accuracy and secure them in place.
Peripheral Device Connection
After completing the installation, connect your various peripheral devices
to the switch panel. Ensure that the devices are compatible with the rated
voltage and current of the panel.
LED Illumination Control
To control the LED illumination, you can either run it through a switch or
dimmer. This allows you to adjust the brightness or turnoff the illumination
as needed.
Frequently Asked Questions (FAQ)
-
Q: Can I exceed the maximum panel rating of 45A?
A: It is not recommended to exceed the maximum panel rating as it may lead to overheating and potential damage to the panel and connected devices. Always ensure that your total load does not exceed the specified limits. -
Q: Where can I find technical support for the SZ1925?
A: For technical support or any inquiries related to the SZ1925 switch panel, please contact Electus Distribution Pty Ltd at 1300738 555 or visit their website at electusdistribution.com.au.
Straight forward installation and wiring, with just four connections – everything else is pre-wired! Then all you need to do is connect your various peripheral devices. Switches are rated at 20A for a 12V system (10A for 24V) up to a maximum 45A per panel. The LED illumination is powered separately, so you can run it through a switch or dimmer too.
Features
- Easy installation
- High quality switches
- Blue LED illumination
Specifications
- Switch Rating: 12VDC @ 20A, 24VDC @ 10A
- Panel Rating: 45A
Distributed by:
Electus Distribution Pty Ltd
46 Eastern Creek Dr,
Eastern Creek NSW 2766 Australia 1300 738 555 |
electusdistribution.com.au
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>