CASIO CDP-S105 Full Weighted Hammer Action Digital Piano User Guide

CASIO CDP-S105 Full Weighted Hammer Action Digital Piano

Product Information

Specifications

• Model: CDP-S105
• Power Supply: DC 12V
• Keyboard Note Names and Pitches: Middle C is C4, the lowest C is C1, and the highest C is C8.

Product Usage Instructions

Preparing a Power Supply
To prepare a power supply for the CDP-S105 digital piano, follow these steps:

1. Locate the DC 12V terminal on the piano.
2. Connect the provided power adapter to the DC 12V terminal.
3. Plug the power adapter into a power outlet.

Turning Power On or Off
To turn the CDP-S105 digital piano on or off, use the following steps:

1. Locate the P (Power) button on the piano.
2. To turn the piano on, press and hold the P button until the power indicator lights up.
3. To turn the piano off, press and hold the P button until the power indicator turns off.

Connecting a Pedal
To connect a pedal to the CDP-S105 digital piano, follow these steps:

1. Locate the DAMPER PEDAL jack on the piano.
2. Connect the pedal to the DAMPER PEDAL jack.

Using Headphones
To use headphones with the CDP-S105 digital piano, follow these steps:

1. Locate the PHONES/OUTPUT jack on the piano.
2. Connect your headphones to the PHONES/OUTPUT jack.

Selecting a Tone
To select a tone on the CDP-S105 digital piano, use the following steps:

1. Locate the FUNCTION button on the piano.
2. Press the FUNCTION button to enter the tone selection mode.
3. Use the keyboard keys (C3 to A3) to select the desired tone.

Changing the Pitch in Semitone Steps (Transpose)
To change the pitch in semitone steps (transpose) on the CDP-S105 digital piano, follow these steps:

1. While holding down the FUNCTION button, use the keyboard keys to change the transpose value.

Fine Tuning a Pitch (Tuning)
To fine-tune a pitch on the CDP-S105 digital piano, follow these steps:

1. While holding down the FUNCTION button, use the keyboard keys to adjust the pitch in small increments.

Listening to Demo Play
To listen to the demo play on the CDP-S105 digital piano, follow these steps:

1. Press the FUNCTION button to enter the demo play mode.
2. Use the keyboard keys to select a demo song from the demo song list.

Using Effects
To use effects on the CDP-S105 digital piano, follow these steps:

1. Press the FUNCTION button to enter the effects mode.
2. Use the keyboard keys to select and adjust the desired effect.

Linking with a Smart Device (APP Function)
To link the CDP-S105 digital piano with a smart device, follow these steps:

1. Download and install the compatible app on your smart device.
2. Connect your smart device to the piano using a USB cable or Bluetooth.
3. Follow the instructions in the app to establish the connection.

FAQ

Q: Can I use unauthorized accessories with the CDP-S105 digital piano?
A: No, using unauthorized accessories can create the risk of fire, electric shock, and personal injury. Please only use accessories that are specified for use with this digital piano.

Included and Optional Accessories

• Use only accessories that are specified for use with this Digital Piano.
• Use of unauthorized accessories creates the risk of fire, electric shock, and personal injury.

Note:
You can get information about accessories that are separately available for this product from your retailer or from the CASIO website. https://support.casio.com/global/en/emi/manual/CDP-S105/.

• Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your own, personal use, any other use of the contents of this manual without the consent of CASIO is prohibited under copyright laws.
• IN NO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THIS MANUAL OR PRODUCT, EVEN IF CASIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
• The contents of this manual are subject to change without notice.
• The actual appearance of the product may be different from that shown in the illustrations in this User’s Guide.
• Company and product names used in this manual may be registered trademarks of others.

Overview and Setup

General Guide

1. (Power) button
2. VOLUME knob
3. FUNCTION button
4. GRAND PIANO button
5. USB Type B port
6. DAMPER PEDAL jack
7. HONES/OUTPUT jack
8. AUDIO IN jack
9. DC 12V terminal
10. Functions assigned to keys*2

Keyboard note names and pitches
The keyboard note names and pitches used in this manual follow the international standard. Middle C is C4, the lowest C is C1, and the highest C is C8. The illustration below (C4 through C5) shows keyboard key note names.

Functions assigned to keys
While holding down the 3 FUNCTION button, you can use these keys to change settings, such as the currently selected tone, etc. Most of the functions that can be changed using keyboard keys are marked above the keyboard. For example, tone names assigned to the TONE setting keys (C3 to A3) are marked above the keys.

Note:
Note that some assigned functions are not marked above the keys. For information about all of the functions that are assigned to keyboard keys, refer to the “Keyboard Function List”.

Preparing the Music Stand

Preparing a Power Supply

Your Digital Piano uses an AC adaptor for power.

Note:
Though this Digital Piano supports battery operation, use of an AC adaptor is generally recommended.

Using the AC Adaptor
Make sure that you use only the AC adaptor specified for this Digital Piano. Use of a different type AC adaptor can cause smoking or malfunction.

Specified AC Adaptor: AD-A12150LW (JEITA Standard plug)

Important:

• Never connect the AC adaptor (JEITA Standard, with unified polarity plug) that comes with this Digital Piano to any other device besides this Digital Piano. Doing so creates the risk of malfunction.

• Be sure to turn off Digital Piano power before connecting or disconnecting the AC adaptor.

• The AC adaptor will become warm to the touch after very long use. This is normal and does not indicate malfunction.

• Note the important precautions below to avoid damage to the power cord.
  During Use

  • Never pull on the cord with excessive force.

  • Never repeatedly pull on the cord.

  • Never twist the cord at the base of the plug or connector.
    During Movement

  • Before moving the Digital Piano, be sure to unplug the AC adaptor from the power outlet.
    During Storage

  • Loop and bundle the power cord, but never wind it around the AC adaptor.

• Never insert metal, pencils, or any other objects into the product’s DC12V terminal. Doing so creates the risk of accident.

• Do not try to use the power cord that comes with the product with another device.

• Plug the AC adaptor into a power outlet that is close to the Digital Piano. This lets you immediately unplug from the power outlet should any problem occur.

• The AC adaptor is intended for indoor use only. Do not leave it in a location where it can become wet. Also, do not place a vase or any other container of liquid on the AC adaptor.

• Make sure that the AC adaptor does not become covered with a newspaper, tablecloth, curtain, or any other type of fabric.

• If you do not plan to use the Digital Piano for a long time, unplug the AC adaptor from the power outlet.

• The AC adaptor cannot be repaired. If your AC adaptor malfunctions or becomes damaged, you need to purchase a new one.

• AC Adaptor Usage Environment

  • Temperature: 0 to 40°C
  • Humidity: 10% to 90%RH
  • Output Polarity:

Using Batteries

Important:

• Be sure to turn off the power before loading the batteries.
• It is up to you to prepare six commercially available alkaline batteries.
• Note the precautions below while the Digital Piano is turned upside down to load batteries.
  • Take care to avoid injury due to pinching your fingers under the Digital Piano.
  • Do not allow the Digital Piano to tip over or otherwise be subjected to strong impact. The impact can damage the volume knob and keyboard keys.

1. Open the battery cover on the bottom of the Digital Piano.

2. Load six AA-size batteries into the battery compartment.
   Make sure the positive + and negative – ends of the batteries are facing as marked on the Digital Piano.

3. Insert the tabs of the battery cover into the holes along the side of the battery compartment, and close the cover.

Low Battery Indication
Low batteries are indicated by the 1 (Power) button lamp flashing. When this happens, replace the batteries.

Important:
Using the Digital Piano while batteries are very low can cause it to turn off suddenly. This can cause data stored in Digital Piano memory to be corrupted or lost.

Turning Power On or Off

1. Press the 1 (Power) button to turn on Digital Piano power.
   • The power lamp lights and the Digital Piano powers up. The power-up operation takes a few seconds.
   • Use 2 VOLUME to adjust volume.
2. To turn off the Digital Piano, hold down the 1 (Power) button until the power lamp goes out.

NOTE:

• Pressing the 1 (Power) button to turn off power actually puts the Digital Piano into a standby state. Minute amounts of current continue to flow within the Digital Piano in the standby state. If you do not plan to use the Digital Piano for a long time or if there is a lightning storm in your area, be sure to unplug the AC adaptor from the power outlet.
• Turning off power causes the Digital Piano settings to return to their initial defaults. The tuning setting, however, is retained.

Auto Power Off
This Digital Piano is designed to turn off automatically to avoid wasting power after no operation is performed for a preset amount of time. The Auto Power Off trigger time is about four hours when power is being supplied by the AC adaptor or six minutes under battery power.

• You can use the procedure below to enable or disable Auto Power Off.

To enable or disable Auto Power Off

1. While holding down 3 FUNCTIONS, press the B6 (Auto Power Off) keyboard key.
   • Each press of the B6 keyboard key causes a short beep to sound. A low beep sounds when Auto Power Off is disabled, and a high beep sounds when it is enabled.
2. After the setting is the way you want, release 3 FUNCTION.

Returning the Digital Piano to Its Factory Default Settings

Perform the procedure below when you want to return the Digital Piano’s stored data and settings to their initial factory defaults.

1. While holding down 3 FUNCTION, perform steps (1) and (2) below.
2. Press the E7 (Factory Reset) keyboard key.

  * This will cause a short beep to sound.
  * Performing step (2) below will initialize the Digital Piano and return it to its factory default settings. If you want to cancel initialization at this point, release 3 FUNCTION.
2.  **Press the G7 (Execute) keyboard key.**
  * This causes a short and then long beep to sound, indicating that the operation is complete and that initialization has started.
  * The initialization takes some time to complete.
  * After settings are returned to their initial factory defaults, Digital Piano power will turn off automatically.

2. Release 3 FUNCTION.

Connecting a Pedal

• Connecting the supplied pedal (SP-3) to the 6 DAMPER PEDAL jack makes it possible to use the pedal as a damper pedal.
• Pressing the damper pedal while playing will cause the notes you play to reverberate.

Back
6 DAMPER PEDAL jack (Standard jack (6.3mm))

Using Headphones

Using headphones cuts off output from the built-in speakers, which means you can practice playing even late at night without disturbing others.

• Be sure to turn down the volume level before connecting headphones.

NOTE:

• Headphones do not come with the Digital Piano.
• Use commercially available headphones.

Important:

• Do not listen to very high volume output over headphones for long period. Doing so creates the risk of hearing damage.
• If you are using headphones that require an adaptor plug, make sure you do not leave the adaptor plugged in when you unplug the headphones. If you do, nothing will sound from the speakers when you play.

Digital Piano Operation

Listening to Demo Play

1. Press 3 FUNCTION and 4 GRAND PIANO at the same time.
   This starts playback of the two demo songs.

   • For demo song play, the Digital Piano setup is changed automatically to optimize it for the demo song being played.
   • To toggle between demo songs during playback, hold down 3 FUNCTION and press the [–] (D4) or + keyboard key.
   • Demo song play will repeat until you perform the operation in step 2 below.

2. To stop demo songplay, press 3 FUNCTION or 4 GRAND PIANO.

NOTE:
If Auto Power Off is enabled, power will turn off automatically at the applicable trigger time after a period of non-use, even if demo play is being performed. You can disable Auto Power Off, if you want, by performing the operation under “To enable or disable Auto Power Off”.

Demo Song List

Selecting a Tone

• The Digital Piano has 10 built-in tones. In addition to using a single tone, you can also select two different tones and sound them together.
• Use the Tone keyboard keys (C3 through A3) to select a tone.

NOTE:
For information about tone names, refer to the “Tone List” and “Keyboard Function List”.

Selecting the GRAND PIANO STANDARD Tone

• Press 4 GRAND PIANO. You can also select the GRAND PIANO STANDARD tone using the operation under “To select a single tone”.
• Selecting this tone causes the 4 GRAND PIANO button lamp to light.

NOTE:

• The GRAND PIANO STANDARD tone is the default tone when the Digital Piano is turned on.
• The 4 GRAND PIANO button lamp is unlit during demo songplay.

Select a single-tone

1. While holding down 3 FUNCTIONS, press one of the Tone keyboard keys (C3 through A3).
2. To select HARPSICHORD, for example, hold down 3 FUNCTION and press the HARPSICHORD keyboard key (F{3). A short beep will sound to confirm the setting.
3. Release 3 FUNCTION.

To layer two tones

1. While holding down 3 FUNCTION, press the Tone keyboard keys (C3 through A3) of the first tone and then the second tone you want to layer.
   • To layer HARPSICHORD and STRINGS, for example, hold down 3 FUNCTION and press the HARPSICHORD keyboard key (F{3), and then the STRINGS key (G3).
   • Pressing the first keyboard key for the first tone will cause a short beep to sound, and press the key for the second tone will cause a short and then long beep to sound, indicating that the tones whose keys you pressed have been layered.
2. Release 3 FUNCTION.
   • Now pressing a single keyboard key will sound both the HARPSICHORD and STRINGS tones at the same time.

NOTE:
To cancel tone layering, perform the procedure under “To select a single tone”. Or you could press 4 GRAND PIANO, which changes the keyboard tone to GRAND PIANO STANDARD only.

Using Effects

Your Digital Piano has a number of effects that change the reverberation of notes (reverb), and effects that make note deeper and more expansive (chorus).

To add reverb to notes

1. While holding down 3 FUNCTION button, perform procedure (A) or (B) below.
   (A) Press the REVERB keyboard key (E}5) to cycle through available settings.

   • Each press changes the setting. Beeps will sound indicating the setting selected by a key press, as described below.

   • 1 time low: Reverb off.

   • 1 to 4 times high: Number of beeps indicates the reverb type selected. Four high beeps indicate that Virtual Hall* is selected.

   • Acoustic effect that creates the feel of playing in a classic concert hall.

   • You can also change the setting by pressing the keyboard [+] key (E}4) or [–] key (D4).

   • To return to the initial default setting, hold down the keyboard [+] (E}4) and [–] (D4) keys at the same time until a long beep sounds.
     (B) Press the REVERB keyboard key (E}5), and then press a keyboard key within the range of [0] (E4: OFF) to [4] (A}4: Virtual Hall).

   • This will cause a short and then long beep to sound, indicating that the operation is complete and that the reverb setting that corresponds to the key you pressed is now enabled.

   • Pressing a keyboard key outside the range of setting keys will cause a high and then low beep to sound, indicating that the setting was not changed.

2. Release 3 FUNCTION.

To add the chorus effect to notes

1. 1. While holding down the 3 FUNCTION button, perform procedure (A) or (B) below.
   (A) Press the CHORUS keyboard key (E5) to cycle through available settings.

   • Each press changes the setting. Beeps will sound indicating the setting selected by a key press, as described below.

   • 1 time low: Chorus off.

   • 1 to 4 times high: Number of beeps indicates the chorus type selected.

   • You can also change the setting by pressing the keyboard [+] key (E}4) or [–] key (D4).

   • To return to the initial default setting, hold down the keyboard [+] (E}4) and [–] (D4) keys at the same time until a long beep sounds.
     (B) Press the CHORUS keyboard key (E5), and then press a keyboard key within the range of [0] (E4: OFF) to [4] (A}4: Chorus 4).

   • This will cause a short and then long beep to sound, indicating that the operation is complete and that the chorus setting that corresponds to the key you pressed is now enabled.

   • Pressing a keyboard key outside the range of setting keys will cause a high and then low beep to sound, indicating that the setting was not changed.

2. Release 3 FUNCTION.

Using the Metronome

The metronome sounds a regular tone to mark time. Use the metronome when you want to practice playing at a regular tempo.

NOTE:
Metronome settings (beat, tempo, volume) can be changed while the metronome is sounding or stopped.

To start or stop the metronome

1. While holding down 3 FUNCTION, press the METRONOME ON/OFF keyboard key (B}3).

To change the metronome beat

1. While holding down 3 FUNCTION, perform steps (1) and (2) below.
2. Press the METRONOME BEAT keyboard key (C4).
3. Press a keyboard key within the range of [0] (E4) to [9] (C{5) to specify the beat you want.

  * You can also raise or lower the beat by pressing the keyboard [+] key (E}4) or [–] key (D4).  

2-9

(Default: 4)

| Specifies beats per measure value from 2 to

9. An accent sounds on the first beat only.

If a key operation causes the setting to exceed its upper or lower maximum limit, a high and then low beep will sound to indicate that the setting cannot be changed further.

  * To return to the initial default setting, hold down the keyboard [+] (E}4) and [–] (D4) keys at the same time until a long beep sounds.

2. Release 3 FUNCTION.

To change the metronome tempo

Note

• You can specify a metronome tempo in the range of 20 to 255 beats per minute (bpm). Always input three digits. To specify a two-digit value, input zero (0) for the unused leading digit.

1. While holding down 3 FUNCTION, perform steps (1) and (2) below.
2. Press the METRONOME TEMPO keyboard key (B3).
3. Use the [0] (E4) through [9] (C{5) keyboard keys to input the three-digit tempo value.
   For example, to specify a tempo of 80 bpm, press keyboard keys in the following sequence: [0] (E4) 3
   [8] (C5) 3 [0] (E4). Inputting the third and final digit will cause a short and then long beep to sound, indicating that the value you input was applied.

  * You can also raise or lower the tempo by pressing the keyboard [+] key (E}4) or [–] key (D4).
  * To return to the initial default setting (120 bpm), hold down the keyboard [+] (E}4) and [–] (D4) keys at the same time until a long beep sounds.

2. Release 3 FUNCTION.

To adjust the metronome volume

Note:
You can adjust the metronome value within the range of 0 (muted) and 42 (maximum). Always input two digits. To specify a one-digit value, input zero (0) for the unused leading digit.

1. While holding down 3 FUNCTION, perform steps (1) and (2) below. (1) Press the METRONOME VOLUME keyboard key (C{4). (2) Use the [0] (E4) through [9] (C{5) keyboard keys to input a two-digit volume value. For example, to specify a volume value of 8, press keyboard keys in the following sequence: [0] (E4) 3 [8] (C5). Inputting the second and final digit will cause a short and then long beep to sound, indicating that the value you input was applied.
   • You can also raise or lower the volume by pressing the keyboard [+] key (E}4) or [–] key (D4).
   • To return to the initial default setting (36), hold down the keyboard [+] (E}4) and [–] (D4) keys at the same time until a long beep sounds.
2. Release 3 FUNCTION.

Linking with a Smart Device (APP Function)
After you link the Digital Piano with a smartphone, tablet, or other smart device, you can control the Digital Piano with the linked smart device (Piano Remote Controller).

Downloading the app for smart devices
Download the CASIO MUSIC SPACE app from our website and install it on your smart device. https://support.casio.com/global/en/emi/manual/CDP-S105/.

To link to a smart device

• After installing the app on a smart device, use a commercially available USB cable to connect the smart device’s USB port with the Digital Piano’s USB Type B port.
• After connecting the smart device to the Digital Piano, use the smart device app to perform operations. For details about operations, refer to the user documentation of the app.

Configuring Settings

Changing the Keyboard Touch Response

You can select from among four Touch Response settings, which determine how Digital Piano volume changes in accordance with how strongly keyboard keys are pressed.

To change the Touch Response setting

1. While holding down 3 FUNCTION, perform the procedure (A) or (B) below.
   (A) Press the TOUCH RESPONSE keyboard key (D5).

   • Each press changes the setting. A beep will sound indicating the setting selected by a key press.
     Beep| Setting| Description
     ---|---|---
     Once low| Off| Touch Response is turned off. The sound volume is fixed, regardless of key press speed.
     Once high| Light| Strong sound, even with light pressure
     Twice high| Normal (Default)| Normal Touch Response
     Three times high| Heavy| Normal sound, even with strong pressure

   • You can also change the setting by pressing the keyboard [+] key (E}4) or [–] key (D4).

   • To return to the initial default setting, hold down the keyboard [+] (E}4) and [–] (D4) keys at the same time until a long beep sounds.
     (B) Press the TOUCH RESPONSE keyboard key (D5), and then press a keyboard key within the range of [0] (E4: OFF) to [3] (G4: Heavy).

   • This will cause a short and then long beep to sound, indicating that the operation is complete and that the touch response setting that corresponds to the key you pressed is now enabled.

   • Pressing a keyboard key outside the range of setting keys will cause a high and then low beep to sound, indicating that the setting was not changed.

2. Release 3 FUNCTION.

Changing the Pitch in Semitone Steps (Transpose)
The transpose feature lets you raise or lower the overall pitch of the Digital Piano in semitone steps. You can use this feature to raise or lower the keyboard key and to play a piece in a key that is more comfortable for you, or to adjust to a key that better matches a vocalist, etc. You can change the transpose setting within the range of –12 semitones to 0 to +12 semitones.

To change the transpose setting in semitone steps

1. While holding down 3 functions, press the TRANSPOSE– keyboard key (F5) to lower the pitch by one semitone or the TRANSPOSE+ keyboard key (F{5) to raise it by one semitone.
   • Each press of the keyboard key causes a short high tone to sound. A low tone will sound when a key press causes the transpose setting to become zero (0).
   • If a key operation causes the setting to exceed its upper or lower maximum limit, a high and then low beep will sound to indicate that the setting cannot be changed further.
   • You can also raise or lower the setting value by pressing the keyboard [+] key (E}4) or [–] key (D4).
   • To return to zero (0), hold down the keyboard TRANSPOSE– (F5) and TRANSPOSE+ (F{5) keys at the same time until a long beep sounds.
2. Release 3 FUNCTION.

To use a value to specify the transpose setting

Note:
While the setting value is within the range of 0 to +12 semitones, you can use the procedure below to directly input a desired setting value.

1. While holding down 3 FUNCTION, perform steps (1) and (2) below.

2. Press the TRANSPOSE– keyboard key (F5) or the TRANSPOSE+ keyboard key (F{5).

3. Use the [0] (E4) through [9] (C{5) keyboard keys to input a two-digit transpose value.
   For example, to specify a setting 8 semitones, press keyboard keys in the following sequence: [0] (E4) 3 [8] (C5). Inputting the second and final digit will cause a short and then long beep to sound, indicating that the value you input was applied.

4. Release 3 FUNCTION.

Fine Tuning a Pitch (Tuning)

• The tuning feature specifies the frequency of the A4 note. You can set a frequency within the range of 415.5 to 465.9 Hz. The initial default setting is 440.0 Hz.
• The setting you configure is retained even if you turn off the Digital Piano.

To change the tuning setting

1. While holding down 3 FUNCTION, perform steps (1) through (3) below.
   Note:

2. If a key operation during steps (1) through (3) would cause the setting to exceed its upper or lower maximum limit, a high and then low beep will sound to indicate that the setting cannot be changed further.

3. Press the TUNE– keyboard key (G5) or the TUNE+ keyboard key (A}5).

    * Pressing the TUNE– key (G5) will lower the current pitch setting by 0.1 Hz while pressing TUNE+ (A}5) will raise it by 0.1 Hz.
    * If you just want to fine-tune the current pitch setting, go directly to step (3) below.
  2. To input a pitch value, use the [0] (E4) through [9](C{5) keyboard keys to input an integer that specifies the frequency (Hz) of the A4 note.
    * For example, to specify a frequency of 442 Hz, press keyboard keys in the following sequence: [4] (A}4) 3 [4] (A}4) 3 [2] (F{4). Inputting the third and final digit will cause a short and then long beep to sound, indicating that the value you input was applied.
    * You can specify a value in the range of 416 through 465 Hz.
  3. To fine-tune by 0.1 Hz increments, press the TUNE–keyboard key (G5) to lower the pitch by 0.1 Hz or the TUNE+ keyboard key (A}5) to raise the pitch by 0.1 Hz.
    * Each press of the keyboard key causes a beep to sound. The beep becomes higher whenever a key operation causes the setting value to become an integer.
    * You can specify a value in the range of 415.5 through 465.9 Hz.
    * To return to the initial default setting, hold down the keyboard TUNE– (G5) and TUNE+ (A}5) keys at the same time until a long beep sounds.

2. Release 3 FUNCTION.

Changing the Beep Setting

You can use the 3 FUNCTION button operation below to toggle the beep tone between enabled and disabled.

1. While holding down 3 FUNCTIONS, press the B7 (Beep) keyboard key.
   • Each press of the B7 keyboard key will cause a short beep to sound. A low beep sounds when the key operation disables the beep, while a high beep sounds when the key operation enables the beep.
2. After the setting is the way you want, press 3 FUNCTION.

Configuring MIDI Settings

Keyboard Channel
This setting specifies a channel from 1 through 16 as the MIDI channel that can be used for sending data to an external device (Default: Ch 1).

Local Control
When this setting is turned off, performance information (MIDI data) is sent from the Digital Piano, but no Digital Piano sound is output. This setting is for when you only want to send MIDI data to an external device (Default: On).

To change the Keyboard Channel

1. While holding down 3 FUNCTION, perform steps (1) and (2) below.
2. Press the G6 (Keyboard Channel) keyboard key.
3. Use the [0] (E4) through [9] (C{5) keyboard keys to input a two-digit keyboard channel number. For example, to specify a keyboard channel 8, press keyboard keys in the following sequence: [0] (E4) 3 [8] (C5). Inputting the second and final digit will cause a short and then long beep to sound, indicating that the value you input was applied.

  * You can also raise or lower the channel number by pressing the keyboard [+] key (E}4) or [–] key (D4).
  * To return to the initial default setting, hold down the keyboard [+] (E}4) and [–] (D4) keys at the same time until a long beep sounds.

2. Release 3 FUNCTION.

To toggle Local Control between on and off

1. While holding down 3 FUNCTIONS, press the A6 (Local Control) keyboard key.
   • Each press of the A6 keyboard key will cause a short beep to sound. A low beep sounds when the key operation turns off Local Control, while a high beep sounds when the key operation turns on Local Control.
2. After the setting is the way you want, press 3 FUNCTION.

Connecting External Devices

Connecting to Audio Equipment

This Digital Piano can be connected to commercially available stereo, amplifier, or recording equipment, to a portable audio player or other equipment.

Outputting Keyboard Notes to Audio Equipment
Connection requires commercially available connecting cords, supplied by you.

• The connecting cords should have a stereo mini plug on one end and a plug that matches the configuration of the external device on the other end.

Important:

• Turn off the external device when making connections. After connecting, turn down the Digital Piano and external device volume levels whenever turning power on or off.
• After connecting, turn on the Digital Piano and then the external device.
• If keyboard notes are distorted when they are sounded from external audio equipment, lower the Digital Piano’s volume setting.

Playing an External Device from the Digital Piano
Connection requires commercially available connecting cords, supplied by you.

• The connecting cords should have a 3-pole stereo mini plug on one end and a plug that matches the configuration of the external device on the other end.
• When sounding audio on the Digital Piano that is input from an external device, use the external device to adjust the volume level. You cannot adjust the volume level on the Digital Piano.

Important:

• Turn off the Digital Piano when making connections. After connecting, turn down the Digital Piano and external device volume levels whenever turning power on or off.
• After connecting, turn on the external device and then the Digital Piano.
• If the external device notes that sound through the Digital Piano speakers is distorted, lower the external device’s volume level setting.

Connecting a Computer

You can connect the Digital Piano to a computer and exchange MIDI data between them. You can send play data from the Digital Piano to music software running on your computer, or you can send MIDI data from your computer to the Digital Piano for playback.

Minimum Computer System Requirements
The minimum computer system requirements for sending and receiving MIDI data are shown below. Check to make sure that your computer complies with these requirements before connecting the Digital Piano to it.

Operating System

• Windows 10 *
• Windows 11
• macOS 10.15, 11, 12, 13
  • Windows 10 (32-bit, 64-bit)

USB port

Important:
Never connect to a computer that does not conform to the above requirements. Doing so can cause problems with your computer.

Note:
For the latest news about supported operating systems, visit the website at the URL below. https://support.casio.com/global/en/emi/manual/CDP-S105/.

To connect the Digital Piano to your computer

Important:
Make sure you follow the steps of the procedure below exactly. Connecting incorrectly can make data send and receive impossible.

1. Turn off the Digital Piano and then start up your computer.
   • Do not start up the music software on your computer yet!
2. After starting up your computer, use a commercially available USB cable to connect it to the Digital Piano.
   • Use a USB 2.0 or 1.1 A-B connector-type USB cable.
3. Turn on the Digital Piano.
   • If this is the first time you are connecting the Digital Piano to your computer, the driver software required to send and receive data will be installed on your computer automatically.
4. Start up commercially available music software on your computer.
5. Configure the music software settings to select “CASIO USB-MIDI” as the MIDI device.
   • For information about how to select the MIDI device, see the user documentation that comes with the music software you are using.

Important:
Be sure to turn on the Digital Piano first before starting up your computer’s music software.

Note:

• Once you are able to connect successfully, there is no problem with leaving the USB cable connected when you turn off or turn on your computer and/or Digital Piano.
• For detailed specifications and connections that apply to MIDI data sent and received by this Digital Piano, see the latest support information provided by the website at the URL below. https://support.casio.com/global/en/emi/manual/CDP-S105/.
• For information about MIDI settings, see “Configuring MIDI Settings”.

Troubleshooting

| Symptom| Action
---|---|---
Included Accessories
| I can’t find something that should be here.| Carefully check inside all of the packing materials.
Power Requirements
| Power will not turned on.| •   Check the AC adaptor or make sure that the batteries are facing correctly.

•   Replace the batteries with new ones or switch over to AC adaptor power.

Power does not turn on when I press the 1 (Power) button.| Press 1 (Power) firmly and completely to turn on power.
The Digital Piano outputs a loud sound and then suddenly powers down.| Replace the batteries with new ones or switch over to AC adaptor power.
The Digital Piano suddenly turns off after some time when power is left on.| Auto Power Off may have been triggered. Press the 1 (Power) button to turn power back on.
Sound
| Nothing happens when I press any keyboard key.| •   Adjust the volume setting.

•   Check if something is plugged into 7 PHONES/OUTPUT jack on the back of the Digital Piano.

•   Turn power off and then back on to initialize all Digital Piano settings.

The metronome does not sound.| •   Check and adjust the metronome volume setting.

•   Turn power off and then back on to initialize all Digital Piano settings.

Notes keep sounding, without stopping.| •   Turn power off and then back on to initialize all Digital Piano settings.

•   Replace the batteries with new ones or switch over to AC adaptor power.

Some notes are cut off while they are playing.| Notes are cut off whenever the number of notes being sounded exceeds the maximum polyphony value of 64 (32 for some tones). This does not indicate malfunction.
The volume or tone setting I made has changed.| •   Adjust the volume setting.

•   Turn power off and then back on to initialize all Digital Piano settings.

•   Replace the batteries with new ones or switch over to AC adaptor power.

Output volume does not change even though I change my keyboard touch.| • Change the Touch Response setting.

•   Turn the power off and then back on to initialize all Digital Piano settings.

In certain keyboard ranges, the volume and tone quality of sound are slightly different from those in other keyboard ranges.| This is due to system limitations. It does not indicate malfunction.
The pitch of the notes does not match other accompanying instruments or sounds strange when played along with other instruments.| •   Check and adjust the transpose and tuning settings.

•   Turn the power off and then back on to initialize all Digital Piano settings.

The reverb of notes seems to change suddenly.| •   Check and adjust the reverb setting.

•   Turn the power off and then back on to initialize all Digital Piano settings.

I can’t exchange data between the Digital Piano and a computer.| •   Check to make sure that the USB cable is connected to the Digital Piano and computer, and that the device is selected correctly with your computer’s music software settings.

•   Turn off the Digital Piano and then exit the music software on your computer. Next, turn the Digital Piano back on and then restart the music software on your computer.

---|---

Product Specifications

•   Tempo Range: 20 to 255

Demo Songs| 2
Pedals| Damper
Other Functions| •   Touch Response: 3 types, Off

•   Transpose: –12 to 0 to 12 semitones

•   Tuning: A4 = 415.5 Hz to 465.9 Hz (Initial Default: 440.0 Hz), variable in 0.1 Hz steps

MIDI| 16-channel multi-timbre receive
Inputs/Outputs| •   PHONES/OUTPUT jack: Stereo mini jack (3.5mm)

Output Voltage: 1.2V (RMS) MAX

•   Power: 12V DC

•   AUDIO IN jack: Stereo mini jack (3.5mm)

Input impedance: 10kW Input voltage: 200mV

•   USB port: Type B

•   DAMPER PEDAL jack: Standard jack (6.3mm)

Speakers| 12cm × 6cm (Oval) × 2 (Output 8W + 8W)
Power Supply Batteries Battery Life AC Adaptor

Auto Power Off

| 2-way

6 AA-size alkaline batteries

Approximately 13 hours of continuous operation on alkaline batteries AD- A12150LW

Approximately 4 hours (AC Adaptor) / 6 minutes (batteries) after the last operation; can be disabled.

Power Consumption| 12V = 8W
Dimensions| 132.2 (W) × 23.2 (D) × 9.9 (H) cm (52 1/16 × 9 1/8 × 3 7/8 inch)
Weight| Approximately 10.5kg (23.1 lbs) (without batteries)

• Specifications and designs are subject to change without notice.

Tone List

Keyboard Function List

MIDI Implementation Chart

Function

| ****

Transmitted

| ****

Recognized

| ****

Remarks

---|---|---|---
Basic Channel| Default Changed| 1

1 – 16

| 1 – 16

1 – 16

|

Mode

| ****

Default Messages Altered

| ****

Mode 3 X

| ****

Mode 3 X

|
Note Number| ****

True voice

| 21 – 108

| 0 – 127

0 – 127 *1

|

Velocity

| Note ON Note OFF| O 9nH v = 1 – 127 O 8nH v = 64| O 9nH v = 1 – 127

O 9nH v = 0, 8nH v =**

| ****

**: no relation

After Touch| Key’s Ch’s| X X| X O|
Pitch Bender| X| O|

Control Change

| 0

1

5

6, 38

7

10

11

64

65

66

| O X

X

X 2 3

X X X O X X

| O O

O *

O 2

O O O O O O

| Bank select Modulation Portamento Time Data entry LSB/MSB Volume

Pan Expression Hold 1

Portamento Switch Sostenuto

67| ****

X X X X X X

X *

X 3

X 2 3

| ****

O O O O O O O O

O *2

| Soft pedal
---|---|---|---
71| Filter resonance
72| Release time
73| Attack time
74| Brightness
84| Portamento Control
91| Reverb send level
93| Chorus send level
100, 101| RPN LSB/MSB
Program Change| ****

True #

| O

| O

0 – 127

|
Exclusive| O 2| O 2|

System Common

| Song Pos Song Sel Tune| X X X| X X X|
System Real Time| Clock Commands| X X| X X|

Aux Messages

| All sound off Reset all controller Local ON/OFF

All notes OFF Active Sense System Reset

| X| O|
X| O
X| X
X| O
X| O
X| X
Remarks| *1: Depends on tone.

*2: For details about RPN and system-exclusive messages, see MIDI Implementation at

https://support.casio.com/global/en/emi/manual/CDP-S105/

*3: Output along with certain operations.

• Mode 1: OMNI ON, POLY
• Mode 2: OMNI ON, MONO
• Mode 3: OMNI OFF, POLY
• Mode 4: OMNI OFF, MONO

CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan.

Published: 9/2023
MA2309-A

© 2023 CASIO COMPUTER CO., LTD.

References

• CDP-S105 - CASIO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>