ROLINE 14013363 HDMI 4K USB KVM Extender Over Fiber Optic Installation Guide

14013363 HDMI 4K USB KVM Extender Over Fiber Optic

“`html

Specifications:

• HDCP Version: 2.2
• HDMI resolution: 4K@60Hz
• Audio format: Stereo
• Fiber wavelength: Single-mode
• Fiber transmission distance: Up to 20km
• Maximum operating current: 2A
• Operating Temperature: 0°C to 40°C
• Dimensions (L x W x H): Not specified
• Weight: Not specified

Product Usage Instructions:

Connection Setup:

1. Connect the Fiber-LC port to the corresponding port on the
   receiver.

2. Connect the HDMI signal output to the display device.

3. Connect the HDMI signal input to the video source.

4. Connect the RL: 3.5mm stereo output for audio.

5. Connect any additional ports as needed (IR-TX, DC power, RS232,
   USB).

6. Power on the devices and ensure they are properly synced.

Usage:

The ROLINE KVM Extender over Fiber Optic allows for
long-distance transmission of HDMI signals with high resolutions.
Follow these steps:

1. Power on both the transmitter and receiver units.

2. Ensure that the fiber cable is securely connected.

3. Adjust the display settings on your source device to match the
   desired resolution.

4. You can now extend HDMI signals over the fiber optic cable up
   to 20km.

FAQ:

Q: What is the maximum resolution supported by this

extender?

A: The extender supports HDMI 4K resolution at 60Hz with HDCP
2.2 compliance.

Q: Can I use this extender for multimedia teaching

applications?

A: Yes, the extender is suitable for multimedia teaching
scenarios where long-distance HDMI signal transmission is
required.

Q: How do I reset the extender if needed?

A: Press the reset button located on the device to reset it to
factory settings.

“`

ROLINE KVM Extender over Fiber Optic, HDMI 4K, USB, 20km
14.01.3363
Quick Installation Guide Ver. 1.0
All brand names and trademarks are properties of their respective owners
CONNECTION DIAGRAM:

Supports RS232 Complies with SFP MSA and SFF-8472 standard protocol Plug and play Supports 4K to 1080P resolution (Downscaling).
APPLICATION SCENE:
Security monitoring Multimedia Teaching Broadcast screen HDMI signal extension
PHYSICAL INTERFACE DIAGRAM:

1. Fiber-LC port 2. HDMI signal output 3. HDMI signal input 4. RL: 3.5mm stereo output 5. IR-TX: IR transmitter port 6. DC: 12V power interface 7. RS232 port 8. USB port (connect to PC) 9. Reset button

INTRODUCTION:
This HDMl fiber extender is a device transmitting audio and video signal via bidirectional single fiber cables. It transmits your display with high resolutions up to 20km. It supports IR, RS232 and KVM function. By using bidirectional single fiber LC interface, it can transmit signals stable. lt can be used for long-distance HDMI signal transmission.

PACKAGE CONTENT:

HDMI fiber extender transmitter HDMI fiber extender receiver DC 12V/2A power supply User manual IR

1 x 1 x 1 x 1 x 1 pair

FEATURES:
Supports HDMI 4K@60HZ/HDCP2.2 Transmitter supports HDMI Loop out 3.5mm stereo output Supports IR Supports KVM

1. Fiber-LC port 2. HDMI signal output 3. RL: 3.5mm stereo port 4. IR-RX: IR receiver port 5. DC: 12V power interface 6. RS232 port 7. USB1: connect with keyboard or moue 8. USB2: connect with keybord or mouse 9. Reset button

SPECIFICATIONS:
HDCP Version HDMl resolution Audio format Fiber wavelength Fiber transmission distance Maximum operating current Operating Temperature Dimensions (L x W x H) Weight

HDCP 2.2 Highest input resolution is 3840*2160@60Hz L-PCM 1310nm; 1550nm 20km 2A/12V DC (TX), 2A/12V DC (RX) -10C° to +55C° 106 x 106 x 17mm TX: 272.1g; RX: 273.1g

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>