AUTOMATE N300615-5 Roman Shade Installation Guide
- June 28, 2024
- AUTOMATE
Table of Contents
N300615-5 Roman Shade
“`html
Product Specifications
-
Product Name: Roman Shade
-
Model Number: N30061565101-50738-
-
Mounting Options: Motorized & Motorized Day & Night
inside mount, Motorized outside mount default -
Hardware Included: Brackets, 1 1/2 Screws, Spacer Blocks (if
applicable) -
Shade Width Options: 2pcs, 3pcs, 4pcs
Product Usage Instructions
Installation Instructions
Please leave the shade in the folded open position for ease of
installation. Keep all components and packaging until the shade is
fully installed.
Recommended Tools
- Power drill & Drill bit
- Tape measure
- Screwdriver
- Level
- Pencil
Mounting the Shade Inside a Window Frame
-
Step 1: Mark both side-headrail marks centered
along the top of the window frame. -
Step 2: Mark the screw positions for brackets,
3.5″ from each side of the shade. -
Step 3: Ensure even spacing of brackets if
more than two are needed. Fix each bracket with a 1 1/2″
screw. -
Step 4: Mount the brackets. Maintain a min.
distance of 1 3/8″ for motorized and 2″ for Motorized Day &
Night from the edge of the wall to the center of the screw
hole.
Mounting the Shade Outside a Window Frame
-
Step 1: Determine the desired position of the
shade and mark accordingly. -
Step 2: Ensure even spacing of brackets if
more than two are required. -
Step 3: Mount the brackets. For motorized,
attach with 2 pcs 1 1/2″ screws directly on the wall. For Motorized
Day & Night, use a combination of brackets and spacer blocks as
center support if needed.
Install Wrapped Valance Returns (optional)
Use provided universal wrapped valance returns if desired.
Mounting the Shade
-
Step 1: Align the female bracket preinstalled
on the shade to the male bracket. -
Step 2: Slide the female bracket on the shade
into the male bracket until it snaps into place.
Frequently Asked Questions (FAQ)
Q: Do I need to purchase additional fasteners for
mounting?
A: Fasteners are provided for wood surfaces. For other surfaces
like metal, drywall, or plaster, you may need to purchase
appropriate screws or anchors separately.
Q: Can I install the shade both inside and outside a window
frame?
A: Yes, the shade installation process is similar for both
inside and outside mount applications. Follow the specific
instructions provided for each mounting option.
“`
N30061565101-50738-
Roman Shade
Installation Instructions
Hardware Included
Motorized & Motorized Day & Night inside mount
Bracket
1 1/2″ Screw
Shade Width
20″ÙXÙ44″ 44″XÙ70″ 70″XÙ96″
2pcs 3pcs 4pcs
2pcs 3pcs 4pcs
Motorized Motorized Day & Night
Motorized outside mount default
Bracket
1 1/2″ Screw
Shade Width
Please take a moment to review the following installation guide. Please leave shade in folded open position for ease of installation. Be sure to keep all components and packaging until shade is fully installed.
Recommended Tools
Power drill & Drill bit Tape measure Screwdriver Level Pencil
Fasteners needed for different mounting surfaces:
Mounting Surface
Fastener
Wood
1 1/2″ Screw (Provided)
Wall Anchors, Expansion Bolts Drywall/Plaster (Not Provided)
Metal
Sheet Metal Screws (Not Provided)
20″ÙXÙ44″ 44″XÙ70″ 70″XÙ96″
2pcs 3pcs 4pcs
4pcs 6pcs 8pcs
Motorized Day & Night outside mount default Bracket Spacer Block 2 1/2″ Screw
Shade Width
20″ÙXÙ44″ 2pcs 44″XÙ70″ 3pcs 70″XÙ96″ 4pcs
1 or 2sets 1 or 2sets 1 or 2sets
4pcs 6pcs 8pcs
1. Mounting the shade inside a
window frame
Step 1: Mark both side-headrail marks centered along the top of the window
frame. Step 2: Mark the screw positions where you will install the brackets,
3.5″ from each side of the shade. Step 3: The bracket must be evenly spaced if
more than two brackets are required. Every bracket is fixed with one 1 1/2″
screw.
Evenly 3.5″ spaced
Evenly spaced 3.5″
Bracket
Step 4: Mounting the brackets When flush inside mount, allocate a min.
distance of 1 3/8″ for motorized, while 2″ for Motorized Day & Night from the
edge of the wall to the center of the screw hole.
motorized
Motorized Day & Night
2. Mounting the shade outside
a window frame
For motorized and motorized Day & Night, before installing the shade into the
mounting brackets, please locate the lock pin in the shade bracket on the end
plug side. Slide the pin downward into the end plug to prevent the shade from
falling.
Step 1: Determine a desired position of the shade and mark the top of shade
and both side-headrail marks. The top-of-shade mark is at least 2″ from the
top edge of window frame.
Step 2: The bracket must be evenly spaced if more than two brackets are
required. Step 3: Mounting the brackets. For motorized Attach the bracket with
2 pcs 1 1/2″ screws on the wall directly.
For motorized Day & Night The combination of brackets and spacer block is used
as brackets and also center support if applicable. Put the spacer block at the
back of the bracket as pictured below, and then attach the combination with
2pcs 2.5″ screws.
Note: If spacer block is required, please install it as above picture.
v.20240612
Make sure all brackets are level and aligned.
“”
in the middle
Install Wrapped Valance Returns (optional)
2 pcs of universal wrapped valance returns provided
3. Mounting the shade
Shade installation is the same for both inside and outside mount applications.
Step 1: Align the female bracket preinstalled on the shade to the male
bracket.
Step 2: Slide the female bracket on the shade into the male bracket until it
snaps into place. If more than two brackets are used, it is recommended to
attach the center female bracket into the male bracket first, and then attach
the female bracket at each end.
Step 3: If the female brackets are a little off from the male bracket, the
position of the female brackets can be adjusted by moving left or right 8mm
(5/16″).
Note: To make the installation easily, please do the best to eliminate the
deviation of the placement of bracket, to make sure the male bracket is in the
middle of the female bracket.
“×”
at left side
“×”
at right side
These valance returns are universal for both left and right. Please attach the Velcro on the valance return to the Velcro pre-attached on one end of the shade. Make sure the upper edge of the valance return is in line with upper edge of front valance and that front edge of the valance return aligns with the side of the shade valance.
Operating the shade
Make sure the screen shows the right channel for the shade,and then the shade
can be operable. Please refer to the remote instructions for adjustment.
Note: Channel 1 is the default shown on the remote screen and channel 0
controls all shades programmed in one remote.
How to install Magnetic Hold Down (optional)
Use M3x15mm screw to secure the magnet catch at the below location. Make sure
the magnet catch align with pre-installed magnet on the bottom rail of the
shade. For Day & Night roman shade, the magnet is installed on rear roller
shade hem bar only.
Left side of the shade
13/16″ 9/16″
Bottom of the shade or window sill
Motorized System Motorized Day & Night Finished
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>