eSurvey GNSS eME10 VIVI Smart Terminal for Vehicle User Manual

eSurvey GNSS eME10 VIVI Smart Terminal for Vehicle User Manual

Introduction

VIVI 10 is a highly reliable vehicle intelligent display and control terminal.
Using a 4-core high-speed CPU, use Android operating system, 10.1-inch capacities touch screen, support human-machine touch panel interaction, built- in 4G mobile communication system, adopt waterproof, rustproof, and anti- collision design, widely used in fields such as intelligent agriculture, engineering machine operations management.

Features & Accessories

Main Features

1. Android 10
2. 4 G CAT 1 Mobile Network
3. 2. 4 GHz，WiFi 802.11b/g/n
4. BT 4.1
5. CAN 2.0 2、RS232 2、AHD Camera *1
6. Type-A USB host & Micro-USB Slave

Accessories
Standard package including： Machine and Antenna for 4G Mobile network.

SIM Card

VIVI 10 have a standard SIM card slot. Before insertion，Please turn off the terminal, remove the label on the SIM card slot cover, use a dedicated screwdriver to remove the screws on the card slot cover, and insert the corresponding function card into the corresponding card slot. And tighten the screws on the back panel until they are tight.

Warning : Before installing or replacing the function card, it is necessary to ensure that the terminal is in a shutdown state. Otherwise, it may cause damage to your product or other safety hazards.

Power On

Apply 9V DC voltage to the machine.

Press and hold the power button for more than 3 seconds, Machine will power and display the startup interface.

Operation

When power on properly, then you can using finger to operate UI , connecting WiFi, finding the apps to run, or browsing the websites, like normal Android 10 tablets.

Attentions

Basic matters

1. Please use mobile communication networks within the signal coverage range. For signal, network, and service issues, please consult the system operator.
2. The terminal housing is designed to be waterproof. Non professionals are advised not to disassemble it easily. If the user disassembles it on their own, resulting in reduced waterproof performance of the terminal, the customer will be responsible for it
3. The protection circuit and motherboard of the terminal are matched with each other. If the user disassembles or uses non original accessories on their own, there may be heating and poor waterproof and dust proof performance, and all losses caused by this shall be borne by the user.

Safety precautions

1. Any modifications or modifications made by users to the terminal will not be covered by warranty.
2. Do not touch the power cord with wet hands or unplug the power cord by pulling it.
3. Do not use the terminal in thunderstorm weather as it may malfunction and increase the risk of lightning strikes.
4. Avoid exposing the terminal to extremely cold or hot temperatures, as extreme temperatures can cause terminal deformation and shorten its lifespan.

Disclaimer

1. All content and services available through this terminal belong to third parties and are protected by copyright, patents, trademarks, and other intellectual property laws. This type of content and service is only intended for personal non-commercial use. You may not be able to use any content or services without obtaining permission from the content owner or service provider. In addition to the above restrictions, unless expressly permitted by the application content or service provider, you may not be able to modify, copy, republish, upload, mail, transmit, translate, sell, create derivative works, develop or distribute in any way any content and services displayed through this setting. Third party content and services are provided as is. No express or implied warranties are provided regarding the content or services provided for any purpose. The company expressly declares that it does not assume any implied warranties or terms or conditions recognised through regulations, common law, or other means, including but not limited to merchant ability or suitability for a specific purpose. In any case (including negligence), the customer is solely responsible for providing any content or services through this terminal.
2. We have been informed in advance of the possibility of damage, whether in contract or tort, any direct, indirect, accidental, special or  corresponding loss or damage compensation costs, attorney’s fees, various expenses or any other loss or damage caused by this, or any information contained in the link, or the results caused by your or any third party’s use of any content or service, and we do not guarantee its accuracy, validity, timeliness, legality or completeness. Third party services may be stopped or interrupted at any time, and there is no responsibility or guarantee for any content or service available for a certain period of time. Content and services are transmitted by third parties through networks and transmission devices outside of control. In addition to the generality of the disclaimer clause, it is also explicitly stated that no liability or obligation shall be assumed for any interruption or delay in any content or service applicable to this terminal.
3. There is neither responsibility nor obligation for customer service related to content and services. Any requirements related to content or services should be directly the responsibility of the content and service provider.
   Some of the contents in this user manual may not fully match the terminal, depending on the terminal software or service provider. Please refer to the network instructions for some network download application instructions.

Note: If there is a version iteration of the product, it will be included in the new version of the user manual without further notice. If there are any changes to the appearance or colour of the product, please refer to the actual product.

FCC warning statements:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 40cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>