Jaycar GT4277 Mini Tornado R/C Stunt Car Installation Guide
- June 28, 2024
- Jaycar
Table of Contents
Jaycar GT4277 Mini Tornado R/C Stunt Car
Product Information
Specifications
- Product : Mini R/C Stunt Car
- Age Recommendation: 6+
Product Usage Instructions
Installing Batteries
- Insert the battery in the positive direction first, then the negative direction.
- Tighten the screws clockwise to secure the batteries.
Charging the Stunt Car
- Turn the power switch of the remote control to the ON position.
- Open the charging cover on the remote control and take out the charging plug.
- Insert the charging plug into the charging port of the stunt car.
- The charging indicator will light up, showing that charging is in progress.
- Charging is complete when the charging indicator turns off automatically.
- If the green light flashes during charging, it indicates low battery in the remote control.
Using the Stunt Car
- Turn the car switch to ON to activate the car.
- The car’s code matching light will flash, indicating it is ready for use.
- Turn the power of the remote control to ON.
- Complete the code matching with the car before use.
- After use, remember to turn off the power switch.
Contents
Preparation
- Use a screwdriver to loosen the screw on battery cover of the transmitter by counter-clockwise, take out the battery cover according arrow direction.
- Inert the battery in the positive direction first, and then the battery in the negative direction, and tighten the screws clockwise.
USB charging
Turn the power switch of the remote control to the “ON” position, then open the charging cover on the remote control and take out the charging plug. Insert the charging plug into the charging port of the stunt car, the charging indicator will light up, indicating that charging is in progress. When the charging indicator turns off automatically, it means charging is complete. When the green light flashes during charging, it indicates that the remote controi battery is not sufficientiy charged.
Operation
- When in use, turn the car switch to “ON” , the car’s code matching light will flash, indicating that it is turned on. Turn the power of the remote control to “ON”. Complete the code matching with the car, and then you can use it normally after the code is completed. After use, please turn off the power switch.
- 2. Function of transmitter buttons:
- Press the button of the remote control to start the stunt car. The function indicator on the remote control will light up as the button of the remote control is pressed (press any button of the remote control, the function indicator of the remote control will light up).
- When pressing the forward/backward button, the stunt car can go forward/backward.
- When pressing the left/right button, the stunt car can rotate left/right.
CAUTION
- The car body with 3.7 V Li-ion rechargeable battery, transmitter with 4*1.5V AA batteries (excluded).
- Batteries are to be inserted with the correct polarity;
- Non-rechargeable batteries are not to be recharged;
- Rechargeable batteries are only to be charged under adult supervision;
- Different types of batteries or new and used batteries are not to be mixed;
- The supply terminals are not to be short-circuited;
- When the speed slows down, it means that there is not enough electricity in the car body, please charge the car;
- When the controller has low power, the match frequency light will darken or off,please change the battery of the controller;
- Please identify the charging jack and charging port when charging;
- Please take batteries out from transmitter when it’s not in use for a long time,and turn power switch to “OFF”;
- Unpacking should be carried out under the guidance of adults;
- The packaging contains important information, it should be retained.
Warranty Information
Our product is guaranteed to be free from manufacturing defects for a period of 12 Months. If your product becomes defective during this period, Electus Distribution will repair, replace, or refund where a product is faulty; or not fit for intended purpose. This warranty will not cover modified product; misuse or abuse of the product contrary to user instructions or packaging label; change of mind and normal wear and tear. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and failure does not amount to a major failure. To claim warranty, please contact the place of purchase. You will need to show a receipt or other proof of purchase. Additional information may be required to process your claim. Any expenses relating to the return of your product to the store will normally have to be paid by you. The benefits to the customer given by this warranty are in addition to other rights and remedies of the Australian Consumer Law in relation to the goods or services to which this warranty relates.
This warranty is provided by:
- Electus Distribution
- Address 46 Eastern Creek Drive, Eastern Creek NSW 2766
- Ph. 1300 738 555
FAQ
Q: What should I do if the remote control battery is not sufficiently
charged?
A: If the green light flashes during charging, it indicates that the remote
control battery is not sufficiently charged. Ensure that the remote control is
charged properly before using the stunt car.
Q: How can I start the stunt car using the remote control?
A: Press any button on the remote control to start the stunt car. The function
indicator on the remote control will light up as you press the button. Use the
forward/backward and left/right buttons to control the movement of the stunt
car.
Q: What should I do if my stunt car is not responding to the remote
control?
A: Check if both the car and remote control are powered on and properly
paired. Make sure the batteries are inserted correctly and fully charged. If
issues persist, refer to the troubleshooting section in the user manual or
contact customer support.