Apple Y21 A Tag Global Locator User Manual
- June 28, 2024
- Apple
Table of Contents
Apple Y21 A Tag Global Locator
Product Usage Instructions
Setup:
Before using the device, ensure it is placed on a stable surface with
proper ventilation. Connect the device to the power source using the provided
cable.
Powering On:
Press the power button located on the device to turn it on. Wait for the
device to initialize before proceeding.
Functionality:
Use the control panel or remote control to navigate through ifferent
functions of the device. Refer to the user manual for detailed instructions on
each function.
Maintenance:
Regularly clean the device with a soft, dry cloth to prevent dust buildup.
Avoid using harsh chemicals or solvents that may damage the device’s surface.
Safety Precautions:
Do not expose the device to moisture or extreme temperatures. Unplug the
device during thunderstorms or when not in use for an extended period.
Frequently Asked Questions (FAQ)
-
Q: Can the device be used outdoors?
A: The device is designed for indoor use only and should not be exposed to outdoor elements. -
Q: How do I reset the device to factory settings?
A: To reset the device, locate the reset button on the back panel and press it using a small pointed object.
Specification
- Model: ATag/Y21
- Battery: CR2025
- Voltage: DC 3V
- Wireless: BT 5.2
- System: iOS
- Buzzer: Built-in ≥ 75db (in 10cm)
- Humidity range: ≤ s95% (Non-condensing)
Quick instructions
- Turn on the device and pair
- Pull up the battery insulation to turn it on. It should a ring chime Indicating It Is powered on.
- Pair the device
- Open the Find My app.
- Hold the device close to your iPhone, iPad, tap the Items tab, tap+ and then Add Other Item.
- Tap Connect.
- Type a name for your device, select an emoji.
- Tap Agree to acknowledge that this item will be linked to your Apple ID.
- Tap Finish.
- Enable Lost Mode
- Open the Find My app, tap the Items tab, then tap your item.
- Under Lost Mode, tap Enable.
- Read the instructions, tap Continue and enter a phone number or email address.
- Confirm the information, customize the lost message, and tap Activate to complete the setup.
- Remove the device
- Open the Find My app, tap the Items tab, then tap your item.
- Tap Remove Item and then tap Remove to complete the operation.
- Note: After removing the device in the app, if you want to pair it, you can open the Find My app and do it in 3 minutes. If there is no re-pairing within 3 minutes, the device will leave the pairing state and the device and app cannot be paired at this time. If you need to pair the device, you need to remove the battery and reinstall it. when you hear the bell, the device enters the pairing state and can be re-paired with the app.
Main Functions
-
Locate your Item
If your missing item isn’t nearby, the Find My app can still help you track It down using the Find My network – hundreds of millions of iPhone, iPad, and Mac devices around the world. Nearby devices securely send the location of your missing device to iCloud, then you can see where it is in the Find My app. It’s all anonymous and encrypted to protect everyone’s privacy. -
Play Sound
- Open the Find My app, tap the Items tab, then tap your Item.
- Click Play Sound, and the device will beep, so you can find the item easily.
How to Connect Products
- Pull out the battery insulation sheet
- Click to enable the device
- Open Find My app
- Add items
- Add other supported items
- Search A Tag
- Select the emoji
- Agree to register
- Complete registration
Warm tip: If you need to return and refund, please be sure to remove the
device before returning it to avoid your privacy disclosure.
FCC STATMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.