SIMPLIFIED MFG EX1L HDMI 2.0b 18Gbps 4K HDR DolbyVision 120m Extender Set User Manual
- June 4, 2024
- SIMPLIFIED MFG
Table of Contents
SIMPLIFIED MFG EX1L HDMI 2.0b 18Gbps 4K HDR DolbyVision 120m Extender Set
Thank you for purchasing this device
The Simplified MFG AUDEX1 is designed to provide years of reliable service. At Simplified MFG, we want the experience with this device to be the best possible and are committed to helping achieve that experience.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge protection such as the HDSURGE and other systems is highly recommended in order to protect and extend the life of your equipment
Introduction
This EX1L 18Gbps HDMI Extender can extend an HDR/Dolby Vision™audio/video, RS-232, bi-directional IR, and the distance is up to 394ft /120mand a 1080p signal up to 150m (492ft) between transmitter and receiver via asingle CAT cable. It supports resolution up to 4K2K@60Hz 4:4:4, 18Gbpsand HDCP 2.2. Additional features include a HDMI loop out and audio deembedder port on the TX, and audio de-embedding at the RX device via anoptical SPDIF and 3.5mm audio breakout on the RX device and is poweredby a single power supply on one end (can be powered from either end). A12V IR kit is supplied with the extender set as well.
Features
- HDMI 2.0, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
- Supports 18Gbps bandwidth
- 120m (394ft) distance at HDMI 2.0b 4K/UHD
- 150m (492ft) distance at 1080p
- HDR 8/10/10+ and Dolby Vision™ support
- WCG (Wide Color Gamut) and HLG (Hybrid Log Gamma) support
- 3.5mm Mini-jack stereo audio breakout on TX
- HDMI Loop Out on TX
- Optical SPDIF and 3.5mm Mini-jack stereo audio breakout on RX
- 2-Way 12V IR (kit included)
- Powers from a single end (either RX or TX)
Package Contents
Specifications
Operation Controls and Functions
Transmitter Panel
Receiver Panel
Pin Definition
IR Receiver and Blaster pin’s definition is as below:
IR System Diagram
Application Example
Warranty and Contact Information
Should you feel that this product does not function adequately due to defects in materials or workmanship, we (referred to as “the warrantor”)will, for the length of the period indicated below (starting from the original date of the purchase) either a) repair the product with new or refurbished parts. Or b) Replace the product with a new or refurbished product. All Simplified MFG products are covered by 3-year parts and a LABOR warranty. During this period there will be no charge for unit repair, replacement of unit components or replacement of the product if deemed necessary. The decision to repair or replace is made by the warrantor. The purchaser must mail in the product during the warranty period. This limited warranty only covers the product purchased as new and is extended to the original purchaser only. It is not transferrable to subsequent owners, even during the warranty period. A purchase receipt or other proof of purchase date is required for the limited warranty service.
Contact
- Sales and Tech Support
- P. 833-HDMI-411 (833-436-4411)
- E. info@simplifiedmfg.com
How to extract audio from HDMI
- Audio Extraction with no conversion. AUDEX1 extracts the audio in the format sent up to 5.1
- Audio Extraction with down conversion. DAC1 extracts the audio from any format and down converts it to stereo
- Audio Extraction with no conversion via audio breakout on RX of EX1L HDMI Extender
- Fully uncompressed audio extraction from display back to AVR via eARC (including Atmos)
- Several sources, no AVR audio extraction at display to soundbar via SW4:1
Note: SW4:1 does not convert audio Can be switched automatically or with IR remote also supports ARC from display
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>