XPpen 40006101688 Magic Drawing Pad User Guide
- June 27, 2024
- XPPEN
Table of Contents
Quick Guide
Magic Drawing Pad
40006101688
Product Overview
- Power button
- Volume button
- Microphone
- Micro SD card slot
- USB Type-C port
- Speakers
- Front camera
- Rear camera
Product Parameters
| Product name | Magic Drawing Pad |
|---|---|
| Product model | 9494G |
| Operating system | Android 12 |
| CPU | octa-core processor |
| Screen size | 12.2 inches |
| Screen resolution | 2160 x 1440 |
| Screen authentication | TL.IV Rheinland certified low blue light (Hardware so |
ution)
Power input| 9V 2Aor5V 3A
Battery capacity| 8000 mAh
Storage| 8 GB RAM + 256 GB ROM
Wireless connection| 2.4GHz & 5GHz + Bluetooth 5.1
Product size| 280.5 x 194.6 x 6.9 mm
Camera| 8MP (front) , 13MP (rear)
Package contents
| Drawing Pad | 1 pc |
|---|---|
| TPU protective case | 1 pc |
| Stylus | 1 pc |
| Power adapter | 1 pc |
| USB cable | 1 pc |
| Pen nibs | 8pcs |
| Nib extractor | 1 pc |
| Drawing glove | 1 pc |
| Quick guide | 1 pc |
| Warranty card | 1 pc |
Note:
Power adapter s not ncluded n some areas, subject to actual package content
Stylus
When replacing the pen nib, use the nib extractor to pinch the front end of the pen nib to pull out the old pen nib, and replace the new pen nib.
Charge & Insert or remove Micro SD card
As shown above, please use the included charger (if available) and USB cable
for charging.
*Please fully charge the pad for the first time.
Please eject the tray using the included pin nsertion tool provided and nsert or remove the Micro SD card.
Important Safety information
Before using this device, please read all safety information to ensure proper and safe use.
- This device is composed of high-precision components, and users are forbidden to disassemble it by themselves. If the device fails, please contact the after-sales service in time for maintenance.
- This device is not waterproof. Please pay attention to moisture and water. If penetrated with water accidentally, do not turn up the device. Do not use any highly corrosive liquid to clean the parts of the device, if cleaning, please use neutral detergent and soft cleaning cloth.
- Please avoid the unit from falling from high places or under too much pressure. Do not touch the display with sharp objects to avoid scratching the display.
- Do not use, store or shake the device in high temperature, high pressure, strong static electricity, strong magnetic field or dusty environment, so as to avoid damage to the device.
Note:
If you need further service, please contact us.
Email: service@xp-pen.com
Website: www.xp-pen.com
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The SAR limit adopted by FCC is 1.6 W/kg averaged over one gram of tissue. The
highest SAR value reported to the FCC for this device type complies with this
limit. The highest SAR value reported to the FCC for this device type when
using in portable exposure conditions is 1.29 W/kg.
The device for operation in the band 5150-5250 MHz is only for indoor use to
reduce the potential for harmfulinterference to co-channel mobile satellite
systems
XPPEN TECHNOLOGY CO.
service@xp-pen.com
www.xp-pen.com
Designed by XPPEN TECHNOLOGY CO. in California
Made n China
Documents / Resources
|
XPpen 40006101688 Magic Drawing
Pad
[pdf] User Guide
40006101688, 40006101688 Magic Drawing Pad, Magic Drawing Pad, Drawing Pad,
Pad
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>