ValueHD C7PRO Integrated UHD Video Conferencing Terminal User Guide

ValueHD C7PRO Integrated UHD Video Conferencing Terminal

Specifications

• Display: UHD
• Interfaces: DC 12V, USB 3.0 (x2), HDMI IN, HDMI OUT1, HDMI OUT2, Touch, LAN, PC, LINE IN, LINE OUT
• Dimensions: 99.2mm x 135.0mm

Appearance and Interface

Installation and Connection

Warning

• Operating this equipment in a residential environment may cause radio interference.
• The Integrated Terminal can be placed on a horizontal desktop or installed on the TV and wall with a bracket.

Desktop Installation

Place the Integrated Terminal on the desktop, keep the desktop steady and pay attention to the anti-slip.

Install on TV with Bracket (optional)

Install on TV with Bracket (optional)

Connection

The cable connections shown in the following figure contain optional configurations and are for reference only. Please connect the cables according to the actual needs

Power

• Connect the power cord to the supplied power adapter, and then connect the terminal to the power outlet via the power adapter.

Network

• Connect LAN via network cable;
• Or, connect LAN via Wi-Fi.

Audio Input

• Audio input via the built-in microphone;
• Or, connect a microphone to the USB interface via a USB cable;
• Connect the PC or mixer to the LINE IN interface via a 3.5mm audio cable.

Audio Output

• Audio output via the built-in speaker;
• Or, connect the TV to the HDMI OUT1 interface via HDMI cable;
• Or, connect the speaker to the LINE OUT interface via a 3.5mm audio cable.

Image Input

• Image input via the built-in camera;
• Connect camera to the HDMI IN interface via HDMI cable;
• Or, connect PC or other devices to the HDMI IN interface via HDMI cable.

Image Output

• Connect TV and other display devices to the HDMI OUT1 interface via HDMI cable to output the main image.
• Connect TV and other display devices to the HDMI OUT2 interface via HDMI cable to output the second image.

Product Dimension

Remote Control

Notice: The remote control may be affected by strong light and the normal working distance is about 10 meters.

FCC

FCC Compliance Statements

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• a) This device may not cause harmful interference.
• b) This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: C hanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body

ISED Compliance Statements

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Frequently Asked Questions

• Q: How do I restart the terminal using the remote control?
  • A: Press the Power Key on the remote control to put the terminal on standby or wake it up. You can also use this key to restart the terminal.
• Q: How can I adjust the volume during a video call?
  • A: Use the Volume + Key to increase the volume and the Volume – Key to decrease it while on a call.

References

• Free classifieds - yourdomain.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>