Humixx Waterproof Built In Lens Phone Case Instruction Manual

Humixx Waterproof Built-In Lens Phone Case

Product Specifications

• Product Name: Phone Case with Fingerprint Recognition
• Compatibility: Compatible with select phone models
• Material: High-quality plastic and sensor technology
• Colour: Black

Pre-installation Preparation

1. Peel off the protective film with the yellow label and leave the fingerprint sticker intact.
2. Ensure there is NO screen protector on your phone before installing. Clean the phone screen thoroughly.

Installation Process

1. Place the phone into the case and seal it securely.
2. Use the scraperboard provided to remove any bubbles that may have formed during installation.

Fingerprint Registration

1. Re-register your fingerprint with the case on to ensure sensitive fingerprint recognition.
2. Please note that the fingerprint recognition may not work properly if the fingerprint sticker is peeled off.

STEP 1

Peel off the protective film with a yellow label and leave the fingerprint sticker.

STEP 2

Please make sure there is NO screen protector on your phone before installing. Then clean the phone screen.

STEP 3

Put the phone into the case and seal it, use the scraperboard to remove the bubbles.

STEP 4

Re-register your fingerprint again with the case on for sensitive fingerprint recognition.The fingerprint recognition will not work properly if the fingerprint sticker is peeled off.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>