HOU MF-SX12 Keyboard Case User Manual

HOU MF-SX12 Keyboard Case

Thank you

Thank you for purchasing and using this product. In order to bring you a better experience, please read the manual carefully and keep it for future reference.

Product Introduction

Product Parameters

Model: MF-SX12
Charging Interface : Type-C
Product Function : Keyboard Input
Operating current : <1 0mA
Standby time : 30 days
Charging time : 2h
Connection: Bluetooth 5.2
Main material : PU+ABS+Aluminum alloy
Operating distance: 10m
Charging current : 250mA
Battery capacity: ~5oomAh
Applicable models: Samsung galaxy Tab S7+/S7FE/S8+/S9+/S9FE+

Maintenance and Charging

Store at room temperature. Type-C charging at normal voltage. If not used for a long time, charge the keyboard every 2 months or so.

Switching on and off

• Dial to “Green” to power on
• Dial to “Red” to power off

Wireless Connection

1. Slide the power switch to green. The power indicator light will be red for 1 second and then go out the pairing indicator light will be flashing blue.
   

2. Go to the “Settings” app on your tablet, click “Connections”, then click “Bluetooth”, and open “Bluetooth”.
   

3. Click on “HOU Keyboard” in “Available devices”, enter the window, and click “Pairing”. The blue light remains on when pairing is successful.
   

• Note: 1. After successful pairing, the next time you use the keyboard will automatically connect to the tablet.

Product Features

• Magnetic installation
• Slim design, easy to carry
• Large touch pad for convenient operation
• Wireless connection
• Sleep function, saving energy
• Button backlighting, better experience of using low-light environments

Key Backlight

1. Turn on backlight / Off backlight / Backlight brightness adjustment: Press to turn on the first level backlight, then press second level, then press third level, and then press to turn off the backlight, and so on.
2. Backlight color switching: Press the combination keys + to switch the backlight color.
3. Under no operation mode, the backlight automatically turns off for 6 seconds. Backlight automatically turns off after 6 seconds in no operation mode.

Status Indicators and Other Instructions

1. Low battery status: red light blinking.
2. Charging: red light is always on.
3. Fully charged: green light is always on.
4. Requesting pairing: blue light blinks.
5. Upper case: white light is always on, lower case: white light is off.
6. Hibernate: Keyboard enters hibernate mode after 10 minutes of standby.
7. After hibernation back to connect: press any key back to connect.
8. Most of the unknown reasons for the use of the malfunction can be solved by restarting the keyboard or tablet.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

ISED Canada Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
IC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>