Leader Lao AB0283 Wireless Charger User Manual
- June 12, 2024
- Leader Lao
Table of Contents
Leader Lao AB0283 Wireless Charger
Product Information
The 90 mm Wireless Charger is a convenient charging device that allows you to charge your Qi compatible mobile devices wirelessly. It features a charging area, an indicator light, a USB port, and an instruction sheet. The charger has a working distance of 6mm and supports magnetic alignment for compatible devices. It is suitable for all mobile devices with Qi technology.
Product Overview
- Charging area
- Indicator Light
- USB
- Instruction sheet
Specifications
- Input: 5V 2A, 9V 1.5A
- Wireless Output: 5W/7.5W/10W
- Working distance: 6mm
Magnetic alignment suitable for compatible devices only. Suitable for all mobile devices with Qi technology.
Operation
1. Connect the cable into a USB port or into a USB AC adapter.
2. Put your Qi compatible device on top of the wireless charger, ensuring
that it is face up and centrally positioned.
3. When the wireless charge is working correctly a white light of the USB
connector will light up.
Note: If your phone has a protective case you may need to remove it for a
successful connection when using the wireless charger.
Warnings
- Do not expose this product to rain or damp conditions.
- Prevent this item from falling as it could cause serious damage.
- Do not dismantle, repair or modify this product by yourself, contact an authorized specialist.
- In order to avoid any risk, do not dispose of this product inappropriately or throw it into the fire.
- Clean it with a dry cloth.
- Do not place this item near sources of heat or expose to direct sunlight.
- Do not insert any metal objects into this device as there is a risk of causing a short circuit in the unit.
- To avoid risk, do not place any metal objects between the charger and the mobile device during the charging process.
- Do not use mobile devices with a metal case.
- Keep out of reach of children.
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
- The device has been evaluated to meet general RF exposure requirement.
- The device can be used in mobile(min20cm) exposure condition.