Xinsheng 9555-LS2 Meteor in Light Engine User Manual
- June 26, 2024
- Xinsheng
Table of Contents
Xinsheng 9555-LS2 Meteor in Light Engine
Specifications
- Voltage: DC 12V (red + black-)
- Power: Max 32W (depending on luminous colour)
- Size: 5595180mm
Product Usage Instructions
Safety Notes
- When using the light engine, ensure that the input voltage matches the designed voltage of DC 12V.
- Non-professional personnel should not attempt to disassemble the light engine to prevent any potential dangers.
- The light engine is not waterproof, so it should be used in a dry environment.
Operating Steps
- Scan the QR code to download the LED LAMP APP on your mobile phone.
- The light engine must operate under a DC12V power supply.
- Open the LED LAMP APP on your mobile phone (ensure Bluetooth is enabled).
- Select the first sub-software, LED BLE, for automatic connection with the light engine.
- Refer to the tutorial in the APP for additional operation methods.
Dear Users
Thank you for choosing our new generation LED light engine. By reading this
manual, you can fully understand the characteristics and how to use our light
engine.
We will continue to optimize the product design, if there’s any change, our
sales department will keep you notified if there’s any update in the design.
Safety Notes
- When using this machine, please make sure that the input voltage used matches this engine’s designed voltage.
- Non-professional personnel are not allowed to disassemble this engine, which may cause danger.
- This machine is not waterproof, so it needs to be kept dry. Please choose a suitable environment when using it.
Technical Parameters
- Voltage: DC 12V (red + black-)
- Power: Max 32W (depending on luminous colour)
- Size: 5595180mm
Product Introduction
- This light source machine is mainly composed of an RGBW intelligent control light engine (constant current) + 10LED meteor lamps.
- RGBW light engine adopts mobile phone APP + RF remote controller (double control technology), which can realize wireless intelligent control, multi-colour, multi-mode, automatic colour change, etc effects.
- Built-in voice control function, makes the lights change along with the music rhythm.
- RGB + W means it has colourful lights, together with pure white light.
- With the memory function, it will keep the same effects as last time (before powering off).
- Rich functions and simple operation; 10LED meteor can also switch modes and adjust speed by mobile phone APP + remote controller.
- After the integration of starry sky + meteor, the fuselage can be minimized, which is convenient for installation in various compact environments and realizes the effect of stars + meteors all over the sky.
APP Control
Scan to download APP: LED LAMP
Operating Steps
- Scan the QR code to download the APP by mobile phone
- The light engine needs to work under a DC12V power supply
- Directly click on the LED LAMP APP (Bluetooth needs to be turned on) on your mobile phone
- Select the first sub-software, LED BLE, and the system will automatically connect with the light engine.
- For more operation methods, you can view the tutorial in the APP
Precautions:
You don’t need to search or match the Bluetooth on your mobile phone. Just
open the Bluetooth Function, Open the LED Lamp APP, and Connect the light
engine with power, then The app will automatically search and connect with the
light engine
RF Remote Control
- RGBW+ 1OLED wireless remote controller
Mobile APP control 10LED:
How to Connect Optic Cable to the Light Engine’s Port
Installation Method of Meteor Lamp
For example, the starting point of a meteor is LED1 to the
endpoint LED7, and the meteor of B can be LED4 to LED10; C channel meteor LED
to LED8, the specific requirements are set according to yourself
FCC
FCC Warnning
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiater radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body.
FAQ
- Q: Is the light engine waterproof?
- A: No, the light engine is not waterproof, so it should be kept dry.
- Q: What is the power supply requirement for the light engine?
- A: The light engine operates on a DC 12V power supply.
- Q: Can non-professionals disassemble the light engine?
- A: No, non-professional personnel should not attempt to disassemble the light engine to prevent any potential dangers
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>