HIKMICRO UD30777B-A Digital Night Vision Scope User Guide

HIKMICRO UD30777B-A Digital Night Vision Scope

Introduction

HIKMICRO CHEETAH LRF Digital Night Vision Scope performs well under any lighting condition. It has an advanced 2560 × 1440 HD sensor and 1920 × 1080 OLED display, which can capture any object in great detail and with rich clarity. Featuring a specific optical component, it can detect more IR information in fog.

Package Content

The package includes Device (× 1), Battery (× 2), Type-C Cable (× 1), Dust- free Cloth (× 1), Battery Charger (× 1), Bag (× 1), and Quick Start Guide (× 1).

Appearance

1. Lens Cover: Protects the lens.
2. Focus Ring: Adjusts focus to obtain clear targets.
3. Infrared Light: Helps to view target clearly in a dark environment.
4. Laser Range Finder: Measures distance with laser.
5. Battery Compartment: For holding the battery.
6. Fixing Ring: Holds the eyepiece in place.
7. Eyepiece: The piece is placed closest to the eye to view the target.
8. Diopter Adjustment Ring: Adjusts the dioptric setting.
9. Type-C Interface: To connect the device to a power supply or transmit data with a type-C cable.
10. Buttons: To set functions and parameters.

Button Description

Press Laser Key and Wheel at the same time to capture snapshots.

Install Battery

Steps

1. Turn the battery cover anticlockwise to loosen it.
2. Insert the battery into the battery compartment as the positive and negative marks indicate.
3. Turn the battery cover clockwise to tighten it.

Note:

• Remove the battery if you aren’t making use of the device for a long time.
• The battery type is 18650 with a protection board. The battery size is 19 mm × 70 mm. The rated voltage is 3.6 VDC, and the battery capacity is 3200 mAh.
• Charge the battery for more than 4 hours before first use.
• To ensure better conductivity, if the battery compartment cover gets dirty, use a clean cloth to wipe the thread.

USB Connection

Steps

1. Turn on the device and make sure the hotspot function is disabled.
2. Lift the data exchange interface cover.
3. Connect the device and power adapter with a type-C cable to power the device.

App Connection

• Live view
• HIKMICRO Academy
• Set parameters
• Upgrade device
• Access albums
• Capture snapshots and record videos

Getting Started

Mount Device on Rail

Note: Use lint-free cloth to clean the device base and the rail

Steps

1. Turn off the device first. Align the installation holes on the device and the rail.
2. Insert the screws through the holes.
3. Tighten the screws to secure the rail on the device.

Zeroing

Steps

1. Select in main menu, and press the wheel to enter the reticle setting interface.
2. Rotate the wheel and select Freeze to freeze the image.
3. Rotate the wheel to select Distance and set the distance to the target.
4. Aim the big reticle at the target.
5. Rotate the wheel to select the coordinates, and press the wheel to switch the X and Y axes.
6. Rotate the wheel to move the reticle until it reaches the target position. The small reticle indicates the initial position

More Operations

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>