KAWA CJ4512 Mini 3 Dash Camera Car DVR User Manual
- June 27, 2024
- KAWA
Table of Contents
KAWA CJ4512 Mini 3 Dash Camera Car DVR
Contact Information
E-mail: support@kawa-in.com
Website: www.kawa-in.com
Product Overview
- LED
- Microphone
- Function Button
- Mount
- Heat Dissipation Hole
- Camera
- Speaker
- Power Port
- Micro SD Card Slot
- Heat-Resistant Adhesive Paper
Note: The product images, accessories, and interface shown in this manual are for reference only. Due to updates and improvements, your device may slightly differ from the schematic diagrams. Please consider the design of your actual device.
Product Installation
-
Apply the Anti-Static Film
Place the anti-static film on the dotted area of the windshield as shown in the image. Select a smooth and clean area of the windshield to apply the anti- static film (do not place it on the edges). Clean the area first and completely remove any air bubbles that appear between the anti-static film and the windshield during application. -
Insert the Micro SD Card
Insert the Micro SD card into the slot until you hear a “click” sound. -
Mount the Dash Cam
Remove the protective film from the adhesive on the base of the camera mount and attach the dash cam to the dotted area of the anti-static film. To ensure a perfect fit between the heat-resistant adhesive paper and the anti-static film, manually press the base of the mount. -
Route the Cables and Connect to Power
As shown in the image, route the power cables along the top of the windshield, the A-pillar, and the glove compartment of the front passenger seat near the vehicle’s cigarette lighter. Connect the cables to the car charger and then insert the cigarette lighter.
Note: The location of the cigarette lighter may vary in each vehicle; the previous image is for reference only.
Button Functions
The power button activates different functions depending on how it is clicked or pressed.
| State | Usage | Function |
|---|---|---|
| Power Off (Power source connected) | Press the power button for 1 second | Turn |
on the dash cam
Power Off (Power source connected)| Press and hold the power button for 3
seconds| Turn off the dash cam
Power On| Click the power button| Enable/Disable Wi-Fi
Power On| Double-click the power button| Enable/Disable audio recording
Power On| Click the power button 3 times| Format the Micro SD card
Power On| Click the power button 5 times| Reset to factory settings
Power On| Press and hold the power button for 8 seconds| Restart the dash cam
When an authorization request arrives| Click the power button| Authorize
LED Functions
If the dash cam is on, the LED status will indicate the corresponding function.
| Status | Function |
|---|---|
| Solid Green | Normal Recording |
| Solid Blue | Not Recording |
| Solid Red | Recording Error |
| Blinking Green | Emergency Video Recording |
| Blinking Blue | Task in Progress |
| Breathing Mode | Wi-Fi Enabled |
Basic Specifications
| Product Name | Dash Cam |
|---|---|
| Model | MINI 3 |
| Power Source | Car Charger |
| Brand Name | KAWA |
| Input | 5V=1.5A |
| Image Resolution | 2304*1296 |
Items in the Box
- KAWA MINI 3 Dash Cam
- User Manual
- Car Charger
- Anti-Static Film
Quick Setup
-
Download the App
Download the KAWA AUTO app by scanning the QR code below. (After downloading the app, you can use it to view real-time video recorded by the dash cam, adjust the installation angle of the dash cam, and view/download recorded videos.) -
Add to the App
Open the KAWA AUTO app, click on the “+” in the upper right corner, select “KAWA Dash Cam MINI 3” and follow the instructions in the app to operate.- During the process of adding the dash cam to the app, the phone must connect to the dash cam’s hotspot.
- Connect to the device’s mobile network (make sure it is on), not to another device’s mobile network or your home Wi-Fi network.
- Access Point Name: KAWA_MINI 3_XXXX (as indicated on the product label) Initial Password: 12345678
- To connect to the dash cam’s access point, your phone’s operating system must be Android 5.0 / iOS 8.0 or higher.
- If you activate a VPN, disable it before connecting the dash cam.
Power Source User Guide
- The dash cam uses the vehicle’s cigarette lighter as a power source. To ensure a stable power source, use the original car charger and power cable. The manufacturer is not responsible for any damage caused by using a power source other than the vehicle’s cigarette lighter or by using another car charger or power cable that is not original.
- In some vehicles, the cigarette lighter continues to function even when the engine is off. Using the dash cam for a long period with the engine off may cause excessive battery drain. If parking mode is not enabled, turn off the dash cam manually or disconnect the charger once the vehicle is stopped. The next time the vehicle is started, you will need to turn on the dash cam manually. The manufacturer is not responsible for any damage caused by not turning off the dash cam manually.
- In vehicles where the cigarette lighter continues to consume energy once the engine is off, if parking mode is enabled and the vehicle is parked for a long time, disconnect the charger to avoid unnecessary battery drain.
Micro SD Card Usage Instructions
- The Micro SD card is not included in the package. You must purchase your own Micro SD card.
- The dash cam is compatible with standard Micro SD cards. Use a 16 GB to 128 GB Micro SD card with Class 10 or higher data speed.
- Insert a suitable Micro SD card before using the dash cam.
- The default partition format of the Micro SD card may differ from the dash cam’s format. Format the Micro SD card in the dash cam before using it for the first time. This will delete all files on the Micro SD card. Ensure you have backed up important data on another device beforehand.
- To avoid a drop in read/write speed after prolonged use, format the Micro SD card in the dash cam once a month.
- Micro SD cards may become damaged or write at a slower speed after being overwritten multiple times, affecting the ability to save video and image files. If this happens, replace the Micro SD card as soon as possible. The manufacturer is not responsible for any damage caused by the Micro SD card.
- Use a high-quality Micro SD card. A low-quality Micro SD card may have differences in actual read/write speed and nominal speed, as well as differences in actual storage capacity and nominal capacity. The manufacturer is not responsible for any loss or damage to videos caused by a low-quality Micro SD card.
- To avoid damaging recorded video on the Micro SD card, do not insert or remove the Micro SD card while the dash cam is on.
Safety Instructions
Use this product as indicated by law. The laws of certain countries, states, or provinces may prohibit or restrict the installation and use of this product in your vehicle. Comply with all applicable laws and regulations regarding the use and installation of this product. It is your responsibility to comply with all applicable laws, regulations, and ordinances, including those related to passenger privacy, and not to use this product where it is prohibited to install or use it.
Precautions Before Installation
- To ensure proper installation, use the supplied accessories as indicated. Using incompatible or foreign accessories may damage the internal parts of the product or cause it to fall off.
- Do not install this product in a hot or humid place, such as:
- Near heating, ventilation, or air conditioning vents
- Areas exposed to rain, such as near the vehicle doors
- Do not install this product in areas that block the driver’s vision or impair the performance of any vehicle operating system or safety function, such as airbags and emergency light switches, which may compromise the driver’s ability to drive safely.
- Do not install this product in front of or beside the dashboard, vehicle doors, or pillars where airbags deploy. To avoid improper use of the product or personal injury, consult your vehicle’s user manual to know where the front airbag deploys.
Notes
- This product is designed to assist driving by recording what happens around your vehicle, not to ensure safe driving. The manufacturer is not responsible for any traffic accidents or losses resulting from the product’s failure or the user’s misuse of the product.
- Due to differences in vehicle conditions, driving habits, and driving environments, the product may not function correctly in certain circumstances. Factors such as power outages, temperature/humidity anomalies, collisions, or damage to the Micro SD card may interfere with video recording. This product does not guarantee that, regardless of the situation, all videos will be recorded correctly. The driving videos recorded by this product are for reference only.
- Keep this product away from strong magnetic fields, as they may damage the product.
- This product can record and save images of vehicle accidents but does not guarantee the recording of all accidents. Minor collisions may not activate the collision sensor, so they may not be recorded in a special folder.
- This product should not come into contact with water or splashes. Keep it dry to avoid failures.
- Do not use this product if the temperature exceeds 65°C or is below -20°C.
- If this product remains inactive for a long time, the battery may deplete. The next time you use it, you may need to manually set the system time.
- Do not subject this product to violent shocks or vibrations to avoid damage or failure.
- Do not use chemical solvents or detergents to clean this product.
Warranty
Limited Warranty: 12 months
Manufacturer: KAWA ELECTRONICS COMPANY LIMITED
Email: support@kawa-in.com
Website:www.kawa-in.com
Address: FLAT A 21/F CHEUNG LEE IND BLDG 9 CHEUNG LEE ST CHAI WAN HONG KONG
FAQs
Q: How do I install the dash cam?
A: Follow the installation steps provided in the manual, including applying the anti-static film, inserting the Micro SD card, mounting the dash cam, and routing the cables to the power source.
Q: What type of Micro SD card should I use?
A: Use a 16 GB to 128 GB Micro SD card with Class 10 or higher data speed.
Q: How do I connect the dash cam to the app?
A: Download the KAWA AUTO app, add the dash cam by following the instructions in the app, and connect your phone to the dash cam's hotspot.
Q: What do the different LED colors indicate?
A: The LED colors indicate various functions, such as normal recording (solid green), not recording (solid blue), recording error (solid red), emergency video recording (blinking green), task in progress (blinking blue), and Wi-Fi enabled (breathing mode).
Q: How do I format the Micro SD card?
A: Format the Micro SD card in the dash cam before using it for the first time. This will delete all files on the card, so ensure you have backed up important data.
Q: What should I do if the dash cam does not turn on?
A: Ensure the power source is connected correctly and the power button is pressed for 1 second to turn on the dash cam.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>