KAWA Smart Pan-Tilt Camera A6 User Manual

USER MANUAL
KAWA SMART PAN-TILT CAMERA A6

Please read this manual carefully before use, and keep it for future reference.

Items in the box

Product Appearance

Note: the illustrations of the product, accessories, and interface in this manual are for your reference only. Due to updates and upgrades, your device may be slightly different from the schematic diagrams. Please refer to the actual device.

Product Specifications

(MAX 12868) Support playback

Power Supply

Connect the power socket and the USB port of the camera with the power cords. When the indicator light of the camera is on, it means that the power is connected.

Indicator

1. Steady Red Light: the camera is connected to the power supply but is not connected to the mobile apps.
2. Flashing Red: the camera is in the mode of code-scanning.
3. Steady Green Light: the camera is connected successfully and the connection to the network is normal.
4. Flashing quickly in green: the camera is connecting to the network.
5. Flashing quickly in red and green: the device upgrade is in progress.

Keys

SET key: Press the SET key and a prompt tone is heard, indicating tr device is ready to scan a code.

Download the KAWA IOT APP

This product can be used with KAWA 10T APP. Please search “KAWA or in App Store or scan the QR code below to download and install the app.
Tips: An Android 5.0/i0S 8.0 or above is required in order to connect rho smart webcam Wi-Fi (2.4GHz) with your mobile phone.

KAWAAPP QR Code

Steps of a network configuration for the camera:

1. Click the Add Device button on the home page of the KAWA APP to add a device;
2. Select Device and choose the smart camera (WiFi version);
3. Reset the camera: please power on the camera first, and then press the “SET” key behind the camera for 5 seconds. And you’ll hear a prompt tone or see the red light flashing;
4. Input WiFi information and the password of a 2.4GHz network;
5. Scan the QR code until the prompt Code Scanning Succeeded is heard;
6. Wait for the device to connect to the network until you hear Network Configuration Succeeded;
7. After a successful configuration, you will hear a prompt Equipment Connected. Click Finish to automatically enter the device control interface.

Installation Instruction

1. Before installation, please confirm that the camera has been added on the app.
2. Select a position with a wide viewing angle and place the camera
3. Installation on the Wall (optional)
   1. Tear off the positioning paper and stick it to the selected
   2. For a wooden wall, drive a screw directly into the area covered by the paper o ; for a concrete wall, drill a hole in the area and insert a bolt before tightening the screw into the wall.
   3. Align the guide rail at the bottom of the camera with the screw and push the camera horizontally to lock it onto the wall.

Note: Please adjust the height and depth while tightening the screws to ensure that the camera is installed correctly.

Q&A

Q: Why can’t the camera connect to the Wi-Fi network?
A

• Check whether the camera is configurated with the network
• Check whether the WiFi is 2.4Gwifi of the 802.11b/g/n protocol (56Wi-Fl is not applicable).
• Check whether the WiFi information and the password are correct.
• Whether a prompt is heard when scanning the QR code.
• Check whether the camera and your mobile phone are cloSe to the router.
  Please ensure that the Wi-Fi signal of the wireless router connected to the camera is within the coverage.

Q: How to check if the camera is abnormally offline?
A

• Check whether the power supply and network are normal;
• Unplug the power supply and plug it again to restart the equipment;
• Reconfigure the camera;
• Check whether the network broadband is above 4Mbps.

Q: How to save videos?
A: The camera supports two storage modes, local storage and cloud storage (to be paid individually).

• Local storage: save the video recorded by the camera to the micro SD card.
• Cloud storage: Videos recorded by cameras can be stored in the cloud.

The videos of the recent 7 days or 30 days can be saved based on the video storage duration.
You can view and download historical videos online.

Safety Instructions

Please use this product to the extent permitted by law.
The laws of certain countries, states, or provinces may prohibit or restrict the installation and use of this product in your vehicle. Please comply with all applicable laws and regulations regarding the use, installation, and operation of this product. It is your responsibility to comply with all applicable laws, rules, regulations, and ordinances, including passenger privacy, and not to use this product in any place where installation or use of this product is prohibited.

Certification

This device complies with the radio interference No. requirements of the European Community.
Product Name: SMART PAN-TILT CAMERA
Brand Name: KAWA
Model Name: A6
Manufacturer: KAWA ELECTRICIAN ICS COMPANY LIMITED
Use the SMART PAN-TILT CAMERA in an environment with a temperature between -20°C and 50°C, otherwise, it may damage your SMART PAN-TILT CAMERA. It can be operating under 2000m. Hereby, KAWA ELECTRONICS COMPANY LIMITED declares that the radio equipment type SMART PAN-TILT CAMERA is in compliance with Directive 2014/53/EU.
For this device, Head SAR and Body SAR were performed with the device configured in the positions according to EN62311, and Body SAR was performed with the device >100mm from the SAR was also performed with the headset attached and without.
Caution: For Adapter: Shall be installed near the equipment and shall be easily accessible.
Only can use the adapter as below:
Manufacturer: Stuff Electronics (Dong Guan) Limited
Model Name: TEKA-UCA1OEU/BS
Rated Input & Output: 100V-240V^-50/60Hz 0.2A MAX & 5.0V 1.0A 5.0W
The plug could be disconnected from the adapter.

Operating Frequency Range

|

The maximum RF Output Pc

---|---
WiFi :2412 – 2472 MHz| 17.8708m

FCC RF Exposure Warning Statements:

NOTE:
This equipment has been tested and found to comply with t [I limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 20cm between the radiator & body.
FCC ID:2AZWZ-A6

Radio Frequency Exposure Statement for IC:

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency Exposure Statement for IC:
This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 20cm between the radiator & body.

This marking indicates that this product should not be disposed with other household wastes throughout the EU To prevent possible harm to the environment or to human health from control-lied waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

This product is designed and manufactured with high-quality materials and components, which can be recycled and reused.
Warranty: 12-month limited warranty
Manufacturer: KAWA ELECTRONICS COMPANY LIMITED
E-mail: support@kawa-in.com
Website: www.kawa-in.com
Address: FLAT A 21/F CHEUNG LEE IND BLDG 9 CHEUNG LEE ST CHAI WAN HONG KONG

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>