KAWA S7 2K Baby Monitor User Manual
- June 9, 2024
- KAWA
Table of Contents
- KAWA S7 2K Baby Monitor
- Box Contents
- Monitor Features
- Camera Features
- Monitor Charging Method
- Camera Power Supply Method
- Camera Installation Methods
- Add Camera to the Baby Monitor
- Display Mode of Screen
- Monitor Menu Settings & Icons Description
- Small icons description
- Warning Explain
- Certification
- FCC Statement
- FCC RF Exposure Warning Statements
- Declaration Of Conformity
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
KAWA S7 2K Baby Monitor
Dear KAWA Customer
Thank you for your trust in KAWA! In order to continuously improve the quality of our products and services and provide you with better products and services, please send us an email with the theme of “Product Experience Feedback”, leaving your valuable comments and suggestions and including your purchase order number.
You Will Get
- An extension of the warranty by one year.
- 10% off coupon for purchase of any new KAWA products.
Box Contents
Monitor Features
-
Volume-/+Keys
Menu Button: -
Short press the [Menul to pop up the menu.
-
Short press the [Menu] to close the menu and return to the home page
-
When the camera is recording, press [menu] key for 2 seconds to stop recording; When the camera with a micro SD card inserted and there is no video recording, press the [menu button for 2 seconds to start video recording.
-
OK Key:
-
Click the [OK] button to enter the Camera Setting in the disconnected interface.
-
For function selection, press the [OK] key to confirm the selection.
-
When connecting multiple cameras and the monitor is in multi-screen display mode, press the [OK] button for 2 seconds to switch monitoring screen.
Navigation Buttons
Return to previous level of menu/Talk button:
- Short press the [return menu/Talk intercom]button in the menu bar and return to the superior menu.
- Any interface, long press [return to the last menu/Talk intercom] button to achieve voice intercom.
Power Button:
- Long press for 3 seconds to power on /off, short press to switch on/off the monitor screen
- Press the button: switch among zoom 1.5X, zoom 2X and zoom off.
- Hold the button: take a picture and save it to the memory card.
- Monitor LED Indicator (Red: In Charging Green: Full Power)
- Monitor TYPE-C Port
- Display Screen
- Microphone
- Reset Button
- Support Stand
- Speaker
Camera Features
- Wide-Angle Lens
- Microphone
- Micro SD Card Slot
- Camera Power LED Status Indicator
- Camera Antenna
- Speaker
- Temperature Sensor
- Camera Micro USB Port
- Camera Pairing Button
Monitor Charging Method
Please fully charge the Monitor before using. Charging method:
- Connect one end of the TYPE-C(1m) cable to the Baby Monitor, and the other end to the power adapter (5V 2A).
- Plug the adapter into a power outlet.
Camera Power Supply Method
- Connect one end of the Micro USB (2.6m) cable to the camera, and the other end to the power adapter (5V 1A).
- Plug the adapter into a power outlet.
After powering the Camera and fully charging the Monitor, you can enjoy the video baby monitor.
Camera Installation Methods
Install Camera( wall mount &corner mount)
- Determine the installation position.
- Put the upper wall bracket on the mounting position and mark the screw hole with a pencil.
- Drill the hole 06.0 mm on the wall, then insert the expansion nail into the hole.
- Screw through the mounting hole of the upper wall bracket and screw into the expansion nail.
- Align the Camera on the upper wall bracket, push forward and hold the Camera.
Note: Please make sure the Camera is properly installed and secured.
Installation Method 1:
Add Camera to the Baby Monitor
Baby Monitor and Baby Camera are paired out of the box. Please refer to the following steps when adding additional Baby Cameras or after resetting a Baby Camera: Please make sure the Baby Monitor and the Baby Camera matches the same version.
- Press the [MENU] button to open the menu, select “Camera Settings””Camera Pairing”, press [OK]to add Camera.
- Press the pair button on the back of the Camera for seconds until you hear the ticking prompt.
Note: If you restore the initial plant settings, press the OK button in the “Please add a camera” interface to add Camera.
After the Monitor and Camera are successfully connected, please avoid using the Monitor and Camera close to each other, otherwise it may cause howling.
Display Mode of Screen
When you add more than two Baby Cameras, you can manually and automatically switch screen, or you can display multiple screens at the same time.
- Manual switching: Long press the [OK ]button, the screen will be switched to the next screen. The icon of the camera you select will display.
- Automatic switching (Muti-Camera Cycling): select “Camera Settings” “Display Mode” “Muti-Camera Cycling/option. The screen cycles through the list of connected Baby Cameras according to pre-set intervals.
- Display muti-cameras at the same time: select “camera settings “display mode””full screen/ , “two screens/ “three screens/ “four screens/ ” option, it can display multiple cameras video at the same time.
Full Screen
This mode allows you to see one camera in full-screen view.
Multi-screen display
Multi-screen mode allows to view up with 2-screen, 3-screen and 4-SCreen. And
you can operate the camera which its screen around with blue lines,
pan/tilt/zoom and “talk to baby “. The audio you hear on the monitor comes
from this camera. To switch to another paired Camera, long press the [OK
lbutton for two seconds.
Monitor Menu Settings & Icons Description
Menu settings
Press the [MENU] button on the Monitor to display the functional interface, as
shown below:
- VOX Mode turned on automatically if the noise is detected above your pre-set level.
- VOX Threshold 1-5 thresholds are optional.
- Audio Only -Select “Audio Only”, monitor display turns off, but you’ll hear audio from your camera(s). When you turn on the VOX mode, the screen will be
- Sound Alert You can set the Baby Monitor to alert you when a specific noise level is detected.
- Note: Surrounding noise might set off false alarm.
- High Temp Alert -When the temperature is higher than the value you set, the monitor will alert.
- Note: The high temperature alert you set must be higher than the low-temperature alert you set.
- Low Temp Alert When the temperature is lower than the value you set, the monitor will alert.
- Note: The low temperature alert you set must be lower than the high temperature alert you set.
- Alert Duration -5 Secs, 10 Secs, 20 Secs and 30 Secs are optional. 10 Secs” by detault. The monitor ill alert continuously according to the alert duration you set.
- Alert Volume -3 volume are optional, “2” by default.
- Note: When the Monitor paired more Cameras, if you set volume 1 which means all paired cameras are volume 1.
- Key Note: The interval duration between each sound alarm is 5 seconds. It will not alert during this interval even if there is an alert trigger condition.
- Monitor white noise Help parent to sleep. Select your desired white noise. You can adjust the volume by pressing the “-/+” volume button.
- Camera Lullaby -Comfort baby. Select your desired lullaby song. You can adjust the volume by pressing the “-/+” volume button.
- Note: Alert is automatically disabled after enabling the lullaby function.
- Warning: The sound of lullabies may mask the baby’s cry.
Feeding.Diaper Changing. Other
Off, 1H, 1.5H, 2H, 2.5H, 3H, 3.5H, 4H and custom are optional.
Description:
- “Off” indicates that the clock reminder is turned off.
- “IH, 1.5H, 2H, 2.5H, 3H, 3.5H, 4H” means that the monitor will alarm you after 1, 1.5, 2, 2.5, 3, 3.5, 4 hours. (e.g. When you choose “Feeding” -> “3H”, means that the alarm clock will remind you to feed after 3 hours)
- Custom: You can set the clock according to the time you need.
-
Camera Pairing -1. Add Camera (Note: You can add up to 4
cameras per baby monitor.) 2. Delete Camera -
Display Mode Full screen, two split-screen, three split-screen,
quad split-screen and cycle cameras.- Note: When multiple cameras are connected and set to “cycle cameras”, the monitor will cycle through the list of connected baby monitors according to the pre-set interval.
-
Record Mode -No Record, Cyclic Recording(when motion detected), Cyclic Recording Select ‘No Record’ :it means that the video will not be recorded, and it won’t be stored in the micro SD card. Select Cyclic Recording(when motion detected)’: It means that recording starts when motion is detected. “Cycle” means that when the micro SD card fills up, the earliest videos will be gradually and automatically deleted to store the latest video. Select ‘Cyclic Recording :it means that the video will keep recording circularly, no matter the motion detected or not.
Please use a 16GB-128GB Micro SD card with data rate of Class 10 or above.
- Videos-Choose, preview, view and delete videos of Cyclic Recording(when motion detected) or Cyclic Recording after selecting a camera.
- Photos -Preview, view and delete photos after selecting a camera.
- Video Screen Setting “Normal” by default.When the camera is inverted for mounting, select the corresponding camera first, select “Rotate 180”, and then press “OK” to complete the setting.
- Time Stamp If the Time Stamp is enabled, the recorded video will contain the time information. In some cases, it can be used as video evidence.
- Status of micro SD card -Show more details of the micro SD card. You can select format to format the micro SD card.Cautious! Formatting will delete all files in the micro SD card and cannot be recovered.
- Language setting Set the monitor display language
- Temperature Unit -°C and °F are optional. Select the desired temperature unit.
- Anti-Screen Flicker -lf the baby monitor’s screen is flickering change to the other Anti-Screen Flicker mode. llumination source frequency: 50Hz and 60Hz optional. Please select the appropriate frequency of the lighting source.
- Default Settings Reset all options to their default setting.
- Version Information Display Monitor version number, Camera version number, Monitor SN number, Camera SN number.
Small icons description
Warning Explain
STRANGULATION HAZARD: Cords can STRANGLE children. Keep cords out of the reach of children (more than
WARNING 3ft (0.9m) away).
Certification
- Product Name: Baby Monitor
- Brand Name: KAWA
- Model Name: S7
- Manufacturer: KAWA ELECTRIONICS COMPANY LIMITED Use the Baby Monitor in the environment with the temperature between-10°C and 50°C, otherwise, it may damage your Baby Monitor. It can be operating under 2000m. Hereby, KAWA ELECTRONICS COMPANY LIMITED declares that the radio equipment type Baby Monitors S7 is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address:
www.kawa-In.com
This device complies with the radio interference requirements of the European Community. The product shall only be connected to a USB interface off version USB2.0 or higher and that the connection to a power USB is prohibited.
Caution:
For Adapter: Shall be installed near the equipment and shall be
easily accessible.
For Battery: Risk of explosion battery is replaced by an incorrect type,
dispose of used batteries according to the instructions.
EVATOST cONSULTING LTD
Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales,
CF15 7QR contact@evatmaster.com
Vatmaster Consulting GmbH
Bettinastr. 30 60325 Frankfurt am Main, Germany
contact@evatmaster.com
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in acordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interterence by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Exposure Warning Statements
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’ s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency Exposure Statement for IC:
This equipment complies with IC exposure limits set forth for an uncontrolled
environment. This equipment shall be installed and operated with minimum
distance 20cm between the radiator & body.
Declaration Of Conformity
- Please use the standard AC Power Chargers and Charging Cables.
- Do not use the device in an environment where the temperature is too high or too low, and do not expose the device to strong sunlight or an environment that is too humid.
- The suitable ambient temperature for S7-M and accessories is -10°C to +50°C.
- The suitable ambient temperature for S7-Cand accessories is -10°C to +50°C.
- When charging, please place the device in a well-ventilated environment with normal room temperature. It is recommended to charge the device within the temperature range of 0°C-~45°C.
This product is designed and manufactured with high-quality materials and components, which can be recycled and reused This symbol means the product must not be discarded as & household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product,contact your local municipality, disposal service, or the shop where you bought this product.
Warranty:12-month limited warranty
- Manufacturer: KAWA ELECTRONIcS COMPANY LIMITED
- Email: support@kawa-in.com
- Web: www.kawa-in.com
- Address: FLAT A 21/F CHEUNG LEE IND BLDG 9 CHEUNG LEE ST CHAI WAN HONG KONG
KAWA ELECTRONICS COMPANY LIMITED All rights reserved. KAWA LOG0 are KAWA ELECTRONICS COMPANY LIMITED trademarks in the United States, Japan, Europe, the United Kingdom, China and other countries/regions. All other trademarks are the property of their respective owners.
Note: Illustrations of the product, accessories, and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.
ABOUT US
KAWA is one of the global leaders in the design, development, supply chain and
production of smart hardware. Based on our advantages in machine vision and
deep learning algorithm, we aim to create advanced products for people around
the world by constant technological innovations. KAWA is creating a safe and
convenient environment by smart technology that will simplify the smart-home
experience and make the life style more relaxed, comfortable and pleasant.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>