BAND SHOPPE Star Line Hoop Trim Kit Instructions
- June 26, 2024
- BAND SHOPPE
Table of Contents
BAND SHOPPE Star Line Hoop Trim Kit
BANDSHOPPE.COM | (800)457-3501
YOU’LL NEED
- HOT GLUE GUN
- HOT GLUE STICKS
- HOOP TRIM KIT
- HOOP TWIRLING BATON
- SCISSORS
FRINGE KIT WRAPPING INSTRUCTIONS
-
STEP 1:
Begin by first wrapping the sequin. Start at one of the baton ends, using a dab of hot glue to secure the end of the sequin to your starting point. -
STEP 2:
Neatly wrap the sequin around the hoop as shown here, keeping your rows side by without too much gapping or overlap. Add dabs of glue as needed to keep the sequin trim in place. Continue wrapping until you’ve returned to your starting point. Add another dab of hot glue to fasten the end of the sequin to the hoop. Snip off any excess sequin trim as needed. -
STEP 3:
Once the sequin is in place, you can now start attaching fringe. One side of fringe is sewn, while the other side has a string intertwined that is to be removed later. Attach the sewn side of the fringe to the outside
of the sequin hoop with hot glue, working in small sections. -
STEP 4:
Allow glue to fully dry, then remove the blue string from bottom of the fringe.
Your decorated hoop is complete!
To avoid burns, use caution when working with hot glue guns. Use protective safety gear like gloves or finger covers, and protect all surfaces before getting started.
UPDATED: 06.03.2024
© Copyright 2024 Band Shoppe, Div. Pearison Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>