BNCE-45-24V Cutting Edge Saw Installation Guide

June 27, 2024
BN

BNCE-45-24V Cutting Edge Saw

BNCE-45-24V-Cutting-Edge-Saw-product

The BNCE-45-24V is a cordless version of the lightweight and compact multi- material Cutting Edge Saw™. This low-RPM, cold-cutting saw is ideal for cutting Grade 60 Rebar (up to #10 ), rod, pipe, and 1-5/8” strut, and much more. The Cutting Edge Saw™ is  ideal for cutting ferrous and nonferrous metals and other materials

Specifications

BNCE-45-24V-Cutting-Edge-Saw-fig-4

Blades

  • RB-BNCE-45: BNCE- 45 Series Cutting Edge Saw™ “STANDARD” TCT Replacement Blade (165 mm) for cutting ferrous and non-ferrous materials (Rebar, Tubing, All-Thread, and general usage)
  • RB-BNCE-45S: Replacement Blade for cutting strut up to 1- 5/8” (165 mm)

Ordering and Assistance

Contact Customer Service at : 800-992-3833

Parts

BNCE-45-24V-Cutting-Edge-Saw-fig-1

# Part # Assembly # Description QTY
1 102560 Screw With Spring Washer M4*12 5
2 102561 Guide Post Plate 1
3 102562 Stop Nut M8 1
4 102563 Guide Post 1
5 102564 Guide Post Spring 1
6 102565 Bolt With Spring Washer M5X16 4
7 102566 Sliding Block 1
8 102567 Bolt With Spring Washer M5X12 4
9 102568 Guide Plate 2
10 102569 Lower Cover Of Gear Box 1
11 102570 Pin A6X16 2
12 102571 Bolt M8x29 (class 12.9) 1
13 102572 Outer Blade Flange 1
14 RB-BNCE-45 Blade 2
15 102573 Inner Blade Flange 1
16 102574 Gear Box 1
17 102575 Stiffener Plate 2
18 102576 Left and Right Rubber Plate 2
19 102577 Bolt With Spring Washer& Big Flat Washer M5X16 4
20 102580 Ball Bearing 6003-2RS 1
21 102581 Bearing plate 1
22 102582 Flat Key-5x5x25 1
23 102583 Spindle 1
24 102584 Stop Sleeve 1
25 102585 No.3 Gear 1
26 102586 Circlips For Shaft -15 1
27 BNCEP24V-26 Ball Bearing 628-2Z 5
28 102588 Circlips 6 1
29 102590 102590 No.2 Gear Assembly 1
30 102591 Spring for Lock Button 1
31 102592 Locking Button 1
32 102631 102631 Ring Gear 35 Tooth w/Shaft 1
33 102595 Gear Box Top Cover 1
34 102596 Bolt With Spring Washer & Flat Washer M5X16 4
35 BNCEP24V- 35 ARMATURE ASSEMBLY

*102599

#35-41

| Nut M6| 1
36| BNCEP24V- 36| Pinion| 1
37| BNCEP24V- 37| Ball Bearing 608-2RS| 1
38| 102634| * _O-Ring 221.6_| 1
39| 102636| Armature Support A1| 1
40| 102637| Armature 24V Brushless| 1
41| BNCEP24V- 40| Ball Bearing 696-2RS| 1
#| Part #| Assembly #| Description| QTY|
---|---|---|---|---|---
42| 102635| | Pan Head Tapping Screws ST3 9×20| 4|
43| 102603| | Bolt With Spring Washer&Flat Washer M5X20| 4|
44| 102642| | Switch Button| 1|
45| 102643| | Pole Switch| 1|
46| 102644| | Right Housing| 1|
47| 102645| | Lampshade| 2|
48| 102646| | Pan Head Tapping Screws ST2.9X14| 6|
49| 102647| | Dust Protection-Right| 1|
50| 102648| | Left Housing| 1|
51| 102649| | Dust Protection-Left| 1|
52| 102639| ELECTRONICS| Stator| 1|
53| BNCEP24V-42- 2| ASSEMBLY| Switch| 1|
54| 102641| | Controller Board| 1|
55| 102650|
#102598*| Battery light PCB| 1|
56| 102651| | Battery light Lampshade| 1|
57| 102652| #52-58| Battery light Label| 1|
58| 102653| | Battery pin assembly| 1|
59| BNCE-24VLI-4C| | Battery| 2|
60| BNCE-24CHGR-120C| | Charger| 1|
61| 102629| | Front Handle| 1|
62| 102630| | Bolt With Spring Washer & Flat Washer M6X16| 2|
_
Replacement Assemblies defined in this Parts Guide are sold as a single unit_

BNCE-45-24V-Cutting-Edge-Saw-fig-2

Accessories

  • BNCEP-68 – Chip Collection Attachment
  • BNTB-20 – Heavy Duty Tool Bag

BN Products-USA™ Heavy Duty Tool Bag (BNTB-20)

BN Products-USA™
TOOLS FOR THE PROFESSIONAL CONTRACTOR 800-992-3833

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

BN User Manuals

Related Manuals