ACURA Multi-View Rear Camera Installation Guide
- June 6, 2024
- Acura
Table of Contents
**Multi-View Rear Camera***
About Your Multi-View Rear Camera
The audio/information screen can display your vehicle’s rear view. The display
automatically changes to the rear view when the transmission is put into
**R**.
Multi-View Rear Camera Display Area
About Your Multi-View Rear Camera
The rear camera view is restricted. You cannot see the corner ends of the
bumper or what is underneath the bumper. Its unique lens also makes objects
appear closer or farther than they actually are.
Visually confirm that it is safe to drive before backing up. Certain
conditions (such as weather, lighting, and high temperatures) may also
restrict the rear view. Do not rely on the rearview display which does not
give you all information about conditions at the back of your vehicle.
If the rear camera lens is covered with dirt or moisture, activate the
rearview camera washer or use a soft, moist cloth to keep the lens clean and
free of debris.
Rear Wiper/Washers P. 179
You can change the Guidelines setting.
Customized Features P. 345
Off: Guidelines do not appear.
Fixed: Fixed Guidelines appear.
Dynamic: Guidelines that move according to the steering wheel direction
appear.
Both: Fixed guidelines and dynamic guidelines appear.
- Not available on all models
Multi-View Rear Camera About Your Multi-View Rear Camera
You can view three different camera modes on the rearview display. Swipe to
highlight the view mode icon and click the A-Zone Touchpad to change the mode.
True Touchpad Interface P. 245 :
: Wide view mode
: Normal view mode
: Top down view mode
- If the last used viewing mode was Wide or Normal view mode, the same mode is selected the next time you put the transmission into
**R**. - If Top down view mode was last used before you turned the power mode to OFF, Wide View mode is selected next time you set the power mode to ON and put the transmission into
**R**. - If Top down view mode was last used more than 10 seconds after you change from
**R**, Wide View mode is selected the next time you put the transmission into**R**.