AITEK LC99 3 In 1 Wireless Charger User Guide
- June 25, 2024
- AITEK
Table of Contents
AITEK LC99 3 In 1 Wireless Charger
Product Information
The SS model is a versatile product designed for a variety of uses. It is lightweight, weighing only 7.939 lbs, making it easy to handle and transport. The sleek design and durable construction ensure long-lasting performance.
Product Usage Instructions
Assembly:
Follow the provided assembly instructions carefully to set up the product correctly. Make sure all components are securely attached before use.
Operation:
To operate the SS model, simply [insert operation steps here]. Ensure to follow safety guidelines and recommended practices during use.
Maintenance:
Regular maintenance is essential to prolong the lifespan of the product. Clean the SS model after each use and store it in a dry place to prevent damage.
Frequently Asked Questions
Q: How do I clean the SS model?
A: To clean the SS model, use a damp cloth with mild soap and water. Avoid using harsh chemicals that may damage the product.
Q: Can the SS model be used outdoors?
A: Yes, the SS model is suitable for outdoor use, but make sure to protect it from extreme weather conditions to maintain its quality.
This product is a 3 in 1 wireless charger, support phone/Airpods/ Apple Watch
charging at the same time.
Please kindly read the user manual before using and keep it for future
reference.
Charging Mode
- Make sure the wireless charger dock connect to the power supply.
- Put the smartphone/Air- pods/Apple Watch properly on the transmitter.
- It supports PD3.0 & QC3.0 protocol.
Specification
- Input: 5V-3A,9V-2.22A, 12V- 1.67A
- Output(Phone): 5W/7.5W/10W MAX
- Output(Apple Watch): 3W
- Outnut(Airnods)• 5W|
- Frequency: 113kHz-205kHz / 300kHz-350kHz
- Charging distance: ≤10mm
- Conversion: ≥72%
- NW.: 162g
- Dimensions: 6012710mml
Notes
- Do not squeeze or collide.
- Do not disassemble or throw into fire or water, to avoid causing a short circuit leakage.
- Do not use wireless charger in severely hot, humid or corrosive environments, to avoid circuit damage and occurs leakage phenomena.
- Do not place too close with a magnetic stripe or chip card (ID card, bank cards, etc.) to avoid magnetic failure.
- Please keep a distance at least 20cm between implantable medical devices ( pacemakers, implantable cochlear, etc.) and the wireless charger, to avoid potential interference with the medical device.
- To take care of the children, to ensure that they won’t play the wireless charger as a toy, to avoid unnecessary accidents.
- When using fast charging, please select a qualified PD3.0 power charging adapter and cable, otherwise it may cause charging instability.
Visit our website at: www.aiteks.com
24-hour customer service online, feel free to contact us at any time.
Or email us at: service@aiteks.com
The involved images are sketch maps, the final product as per the material subiects.
Includes: wireless charger, adapter, power cable, user’s manual.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.