NewFeellight M2 Series Lasers Lights Show Project User Manual

: June 26, 2024
: NewFeellight

Table of Contents

NewFeellight M2 Series Lasers Lights Show Project
Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NewFeellight M2 Series Lasers Lights Show Project

Product Information:
Specifications:

Product Name: App Control Laser Light
Net Weight: 1.05 KG
Product Size: 133123110 mm
Material: Aluminum
Power Consumption: Max 60W
Modulation: TTL Modulation
Scanner/Motor: 20KPPS High-Speed Scanning
Control Mode: DMX512 / Auto / Voice /
Masterslave
DMX Channel Interface: 8/19 CH
Product Model: M2 Series
Light Color: RGB
Gross Weight: 1.2 KG
Laser Power: RGB 300-2000mW
Package Size: 340290270 mm
Protection Rate: IP33 Laser Module

Product Usage Instructions
Setup and Installation

Choose a stable location to place the laser light.
Connect the power source to the laser light.
If using DMX control, connect the DMX cables accordingly.
Ensure proper ventilation around the laser light for cooling.

M2 APP Control Dj Laser Light User Manual

Thank you for purchasing RGB laser light, for your personal safety and better use of the product, please read this manual carefully before use, lest incur any personal injury or damage to the projector

Product picture

Video Link: https://youtu.be/xngzUfravi4
| | Product Specification| | Features

Product name

|

App Control Laser Light

| Product model| M2 Series| Black Cube APP Remote Control Laser Light

The pattern has the effects of broken pen, strobe, tumbling, moving, stretching, zooming, gradual drawing, speed, color, etc. It has the function of pattern size adjustment, built-in 128 beams and animation patterns, which can be used for beam animation performance, laser advertising, laser Projection laser sky net beam performance, laser flowing line effect.

Suitable places: Dj, disco, club, pub, bar, party, ballroom, Stage, concert , wedding , theater, event , and any other entertainment places.

slave

Package list

Package list:

Projector1 Power cable1 User manual *1

CH3

| 0~7| Motherboard fixed built-in geometric pattern (static pattern)|
8~15| Pattern library 1 (line animation)|
16~23| Pattern library 2 (animal animation)|
24~31| Pattern library 3 (animations of characters, cars, etc.)|
32~39| Pattern library 4 (static patterns and text)|
40~127| Pattern library 5 (static geometric patterns)|
128~135| Effect library 1 (dynamic geometric effect) corresponds to playlist 1 of self-propelled mode|
136~143| Effect library 2 (dynamic space-time tunnel effect) corresponds to playlist 2 of self-propelled mode|
144~151| Effect library 3 (dynamic wave effect) corresponds to playlist 3 of self-propelled mode|
152~159| Effect library 4 (dynamic animation continuous playback effect) corresponding to self-propelled mode playlist 4|
160~255| Effect library 5 (dynamic landmark effect) corresponds to playlist 5 of self-propelled mode|
CH4| 0~255| Select a pattern or effect from the CH3 pattern library and effects library

Choose 1 for every 2 values

| When the CH3 value is between 128-255, CH4 0-1 means automatically looping the entire effect library, 2-255 select 1 effect for every 2

values.

CH5

| 0～26| Default animation and effect speed|
27～127| Select the dynamic speed of animations and effects, from slow to|
128～255| Voice control mode, adjust sensitivity from small to large|

CH6

| 0~3| original color of pattern|
4～51| Select the color of the entire image, choose 1 for every 4 values|
52~75| 2 color selection for the whole picture, one for every four values, including 6 color combinations such as white + red, white + blue,|
76~99| 3 color options for the whole picture, 1 for every 4 values, 6 color combinations including white + cyan + pink / green + yellow +|
100~115| 4 sections for color selection, with 1 color selected for every 4 values. such as white + red / yellow + cyan + pink + white.|
116~139| 8 segments for color selection, with 1 color selection for every 4 values, including 6 color combinations such as white + red / blue +|
140~191| 18 segments for color selection, and one can be selected for every 4 values. 13 color combinations such as white + red / cyan + blue /|
| 192~215| 56 segments for color selection, with 1 color selection for every 4 values, including 6 color combinations such as white + red + green|
---|---|---|---
216~239| 18 segments of color separation + black selection, choose 1 for every 4 values, 6 color combinations such as white + red / white +|
240~243| Color writing mode 1, 7 colors from the starting point to the ends| Writing speed is controlled by CH7
244~247| Color writing mode 2, 7 colors from the starting point to both ends
248~252| Color writing mode 3, 7 colors in 2 segments from the start point
253~255| Color writing mode 4, 7 colors in 3 segments from the start point

CH7

| 0| Color does not flow|
1~127| Color running/writing in counterclockwise direction, speed from slow to fast|
128~255| Colors run/write clockwise, from slow to fast|
CH8| 0| No flicker|
1～255| Strobe speed selection, from slow to fast|
19CH control mode
Channel| value| Function| Additional information
CH1| 0| Turn off the lights|
1~255| Turn on the light|
CH2| 0~255| Pattern size selection, with displacement after reduction|

CH3

| 0~7| Motherboard fixed built-in geometric pattern (static pattern)|
8~15| Pattern library 1 (line animation)|
16~23| Pattern library 2 (animal animation)|
24~31| Pattern library 3 (animations of characters, cars, etc.)|
32~39| Pattern library 4 (static patterns and text)|
40~127| Pattern library 5 (static geometric patterns)|
128~135| Effect library 1 (dynamic geometric effect) corresponds to playlist 1 of self-propelled mode| When the CH3 value is between 128-255, The 10 channels CH9 and CH11-19 are invalid.
135~143| Effect library 2 (dynamic space-time tunnel effect) corresponds to playlist 2 of self-propelled mode
144~151| Effect library 3 (dynamic wave effect) corresponds to playlist 3 of self-propelled mode
152~159| Effect library 4 (dynamic animation continuous playback effect) corresponding to self-propelled mode playlist 4
160~255| Effect library 5 (dynamic landmark effect)

corresponds to playlist 5 of self-propelled mode

CH4

|

0~255

|

Select a pattern or effect from the CH3 pattern library and effects library

Choose 1 for every 2 values

| When the CH3 value is between 128-255, CH4 0-1 means automatically looping the entire effect library, 2-255 select 1 effect for every 2 values.

CH5

| 0～26| Default animation and effect speed|
27～127| Select the dynamic speed of animations and effects|
128～255| Enter the voice control mode, adjust sensitivity from small to large|

CH6

| 0~3| Original color of pattern|
4～51| Select the color of the entire image, choose 1 for every 4 values|
52～75| 2 color selection for the whole picture, one for every four values,

including 6 color combinations such as white + red, white + blue,

|
76～99| 3 color options for the whole picture, 1 for every 4 values, 6 color combinations including white + cyan + pink / green + yellow +

white.

|
100～115| 4 sections for color selection, with 1 color selected for every 4 values,|
116～139| 8 segments for color selection, with 1 color selection for every 4 values,|
140～191| 18 segments for color selection, and one can be selected for every 4 values,|
192～215| 56 segments for color selection, with 1 color selection for every 4 values,|
216～239| 18 segments of color separation + black selection, choose 1 for every 4 values, 6 color combinations such as white + red / white +|
240～243| olor writing mode 1, seven colors are written from the start to the e| Writing speed is controlled by CH7
244～247| or writing mode 2, seven colors are written from the start to both e
248～252| or writing mode 3, 7 colors in 2 segments from the start point outw
| 253～255| or writing mode 4, 7 colors in 3 segments from the start point outw| a
---|---|---|---

CH7

| 0| Color does not flow|
1~127| Color running/writing in counterclockwise direction, speed change|
128~255| Colors run/write clockwise, from slow to fast|
CH8| 0| No flicker|
1～255| Strobe speed selection, from slow to fast|

CH9

| 1～127| Select the overall center size of the graphic, from large to small|
128～159| raphics are selected by maximum reduction speed, from slow to fas|
160～191| Graphics are selected by small magnification speed, from slow to fas|
192～223| elect the speed of shrinking the graphics from maximum to minimu|
224～255| The graphics can be zoomed from the maximum to 10%

and then enlarged at a speed selected from slow to fast

|

CH10

| 0~127| Line scan speed selection, from fast to slow| The slower the scan speed, the better the graphics,

but the flicker will also be

128～255| Click to select scan speed, from fast to slow
CH11| 0~127| Gradient painting mode 1, speed from slow to fast|
128～255| Gradient painting mode 2, speed from slow to fast|
CH12| 0~255| Horizontal position selection, the value 128 is the middle position| The part of the graphic that goes beyond the boundary is hidden and not

displayed.

CH13| 0~255| Vertical position selection, the value 128 is the middle position

CH14

| 1～127| Rotation Z axis angle selection|
128～191| Z-axis clockwise rotation speed selection from slow to fast|
192～255| Z-axis counterclockwise rotation speed selection from slow to fast|

CH15

| 1～127| Rotation X axis angle selection|
128～191| X-axis forward rotation speed selection from slow to fast|
192～255| X-axis reverse rotation speed selection from slow to fast|

CH16

| 1～127| Rotation Y axis angle selection|
128～191| Y-axis forward rotation speed selection from slow to fast|
192～255| Y-axis reverse rotation speed selection from slow to fast|

CH17

| 1～127| Horizontal movement position selection|
128~159| Horizontal movement out of bounds mode, speed selection from right to left, slow to fast|

CH18

| 1～127| Vertical shift position selection|
128~159| Vertical movement out of bounds mode speed selection from top to bottom, from slow to fast|
160~223| Vertical movement out of bounds mode speed selection from bottom to top, from slow to fast|
224～255| Move vertically to the boundary and return mode speed selection|
CH19| 1～127| X direction wave special effect speed selection, from slow to fast|
128～255| Y direction wave special effect speed selection, from slow to fast|
App Control
Scan the code below to install the App.
Or download from address below: http://www.gz-huoyue.cn/app/download.html

Bluetooth Connection

To establish a Bluetooth connection, follow the steps below:
Authorization on Android System: Make sure to authorize the active app to use Bluetooth devices in the settings of your An
Device Pairing Limitations (6-2): For some smartphones, due to system restrictions, it may not be possible to directly pair with newly discovered devices within the app. In such cases, it is necessary to first pair the device in the Android system settings before using it in the app.
Pairing Password (6-3): Refer to the instructions provided with the light fixture for the Bluetooth pairing password. The default factory password for the light fixture is usually set to 1234.

Connect the devise to your Cell Phone via Blue tooth.

Click the App
Select device (DQF6)
Select language (Chinese or English)

Initial Setup: Downloading Light Library and Fonts
To begin using the product, you will need to download the light library and fonts.

Operation:

Navigate to Settings
Select Download Files
- Choose the file type and file you want to download
- Click on the Download

Pattern Editing:

A pattern refers to a drawn design and is static.
Text input requires downloading fonts from the server or copying TF fonts to the “HYStageLight/JGDFile/Font” directory on the computer to be transferred to the phone.
During the editing process, to modify a pattern, use the Radio, Multi, or Frame tool to select the pattern block to be modified.
After selecting the pattern block, operations such as scaling and moving can be performed through gestures.
After selecting the pattern block, use the Node tool to adjust the spacing between nodes.
After selecting the pattern block, use the Color tool to adjust the color of the lines.
Once the pattern is drawn, it should be saved for use in editing scenes.

Scene Editing:

A scene refers to a dynamic combination of patterns and actions.
The channel function of scene editing displays language and requires downloading the corresponding light library file.
When editing a scene, please note that when CH1 is equal to 0, the lights will be in BLACK OUT state.
Save the edited scene for use in editing sequences.

Sequence Editing:

A sequence refers to a list of scenes arranged in order.
Sequences need to be generated into TF1 files before they can be uploaded to the luminaire for playback.
Edited sequences can be saved for future modifications, facilitating easy adjustments for subsequent use (as the app cannot directly edit TF1 files).

Remote Control

After configuring all parameters, press the send button for the app to transmit the parameters to the light fixture.
However, for the exceptions of closing, voice control, and locking scenes, these three settings will immediately send parameters to the light fixture.
Sequence play and scene play are temporary playback modes.
After the light fixture is turned off and restarted, it will not return to sequence play and scene play modes.

Maintenance

Try to prevent dust, dirt and smoke oil from being artificially laid or even flowing into the lamp body, and try to keep the laser performer as clean as possible in the use environment;
Please use professional glass cleaner and clean the reflective lens with a velvet cloth regularly every month to ensure maximum brightness output of the laser and extend the service life of the light source. Be careful not to wipe the lens with wet cloth or other chemical solvents. The number of cleaning times depends on the lamp. The frequency of operation depends on the surrounding usage environment; it is recommended to clean it every 15 days.