NewFeellight F2 Series Pro Mini Laser Disco Party Light User Manual

: June 25, 2024
: NewFeellight

Table of Contents

NewFeellight F2 Series Pro Mini Laser Disco Party Light
Product Information
Product Usage Instructions
FAQs
DIMENSION
Features
Effects
Package list
Menu & DMX Control
App Control
Operation
Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NewFeellight F2 Series Pro Mini Laser Disco Party Light

Product Information

Specifications
- Product Name: App Control Laser Light
- Net Weight: 1.65 KG
- Gross Weight: 2.1 KG
- Product Model: F2 Series
- Light Color: RGB
- Material: Aluminum
- Power Consumption: –
- Power Supply: –
- Modulation: –
- Scanner/Motor: –
- Control Mode: DMX512/Auto/Voice/Master-slave
- DMX Channel: 8/19 CH
- Laser Power: RGB300-2200mW
- Protection Rate: IP33
- Laser Module: –
- Beam Size: –
Features
- The product has various effects including broken pen, strobe, tumbling, moving, stretching, zooming, gradual drawing, speed, colour, etc. It also features pattern size adjustment with built-in 128 beams.

Product Usage Instructions

Setting Up
- Place the laser light on a stable surface in the desired location.
Power Connection
- Connect the power supply to the laser light following the manufacturer’s instructions.
Control Mode Selection
- You can choose between DMX512, Auto, Voice, or Master-slave mode for controlling the laser light effects.
Adjusting Settings
- Use the control panel or the designated app to adjust parameters such as speed, colour, and pattern size.
Safety Precautions
- Avoid direct eye exposure to the laser beams and ensure proper ventilation around the product.

FAQs

Q: Can I use this laser light outdoors?
- A: This laser light is rated IP33 for indoor use only. Avoid exposure to water or extreme weather conditions.
Q: How can I control the laser light patterns?
- A: You can control the patterns using the DMX512 protocol, set it to auto mode, activate voice control, or synchronize multiple units with master-slave mode.

Thank you for purchasing RGB laser light, for your safety and better use of the product, please read this manual carefully before use, lest incur any personal injury or damage to the projector

DIMENSION

Video Link: https://youtu.be/LQBlNvgiX-w.

| | Product Specification|
---|---|---|---
Product name| App Control Laser Light| Product model| F2 Series
Light color| RGB
Net weight| 1.65 KG| Gross weight| 2.1 KG
Product size| 200150110 mm| Package size| 300230210 mm
Material| Aluminum| Protection Rate| IP33
| Electrical| | Laser module
Power consumption| Max 60W| Laser Power| RGB300-2200mW
Power supply| AC90-240V,50-60Hz±10%| Laser wavelength| Red 638±5nm, Green 520±5nm, Blue 450±5nm
Modulation| TTL modulation| Beam size| <6*5mm
Scanner/Motor| 15KPPS high-speed scanning| Beam divergence| <1.3mrad
| | Type of laser| Imported semiconductor solid- state laser
| Control| | Optical/scan
Control mode| DMX512/Auto/Voice/Master-slave| Scanner| 15KKPS
DMX Channel| 8/19 CH| Angle| ± 20-30 degrees
Interface| Power con, DMX con| |

Features

APP Control Club DJ Laser Light

The pattern has the effects of the broken pen, strobe, tumbling, moving, stretching, zooming, gradual drawing, speed, colour, etc.
It has the function of pattern size adjustment, built-in 128 beams and Christmas laser lights animation patterns, which can be used for laser light projector beam animation performance, laser advertising, laser party lights net beam performance, and laser flowing line stage lights effect.

Suitable places:

DJ, disco, club, pub, bar, party, ballroom, stage, concert, wedding, theatre, event, and any other entertainment place.

Effects

Package list

Projector*1
Power cable*1
User manual *1

1st Menu	2nd Menu	3rd Menu
DMX-512	A001-A512 address code
CH 08	Display channel 08/19
AUT 0	Auto 1-6 select playlist	Press Enter to choose whether to play when

Select sensitivity

|

LCD Display

MENU: Switch the menu
UP: Page Up
DOWN: Page Down
ENTER: Confirm/Save/Next function

8CH control mode

Channel	value	Function
CH1	0	Turn off the lights
1~255	Turn on the light
CH2	0~255	Pattern size selection, with displacement after reduction
CH3	0~7	Motherboard fixed built-in geometric pattern (static pattern)
8~15	Pattern library 1 (line animation)
16~23	Pattern library 2 (animal animation)
24~31	Pattern library 3 (animations of characters, cars, etc.)
32~39	Pattern library 4 (static patterns and text)
40~127	Pattern Library 5 (static geometric patterns)
128~135	Effect library 1 (dynamic geometric effect) corresponds to playlist 1
of the self-propelled mode
136~143	Effect library 2 (dynamic space-time tunnel effect) corresponds to
playlist 2 of self-propelled mode
144~151	Effect library 3 (dynamic wave effect) corresponds to playlist 3 of
the self-propelled mode
152~159	Effect library 4 (dynamic animation continuous playback effect)
corresponding to self-propelled mode playlist 4
160~255	Effect library 5 (dynamic landmark effect) corresponds to playlist 5
of the self-propelled mode
CH4

0~255

|

Select a pattern or effect from the CH3 pattern library and effects library, and choose 1 for every 2 values

| When the CH3 value is between 128-255, CH4 0-1 means automatically looping the entire effect library, 2-255 select 1 effect for every 2 values.
CH5| 0～26| Default animation and effect speed|
27～127| Select the dynamic speed of animations and effects|
128～255| Voice control mode, adjust sensitivity from small to large|
CH6| 0~3| original colour of the pattern|
4～51| Select the colour of the entire image, and choose 1 for every 4 values|
52~75| 2 color selections for the whole picture, one for every four values,

including 6 color combinations

|
76~99| 3 colour options for the whole picture, 1 for every 4 values, including 6 colour combinations|
100~115| 4 sections for colour selection, with 1 colour selected for every 4 values|
116~139| 8 segments for colour selection, with 1 colour selection for every 4 values, including 6 colour combinations|
| 140~191| 18 segments for colour selection, and one can be selected for every 4 values, including 13 colour combinations|
---|---|---|---
192~215| 56 segments for colour selection, with 1 colour selection for every 4 values, including 6 colour combinations|
216~239| 18 segments of colour separation + black selection, choose 1 for every 4 values, including 6 colour combinations|
240~243| Colour writing mode 1, 7 colours from the starting point to the ends|

Writing speed is controlled by CH7

244~247| Colour writing mode 2, 7 colours from the starting point to both ends
248~252| Color writing mode 3, 7 colors in 2 segments from the start point
253~255| Color writing mode 4, 7 colors in 3 segments from the start point

CH7

| 0| Color does not flow|
1~127| Color running/writing in a counterclockwise direction, speed from slow to fast|
128~255| Colors run/write clockwise, from slow to fast|
CH8| 0| No flicker|
1～255| Strobe speed selection, from slow to fast|

19CH control mode

Channel	value	Function
CH1	0	Turn off the lights
1~255	Turn on the light
CH2	0~255	Pattern size selection, with displacement after reduction
CH3	0~7	Motherboard fixed built-in geometric pattern (static pattern)
8~15	Pattern library 1 (line animation)
16~23	Pattern library 2 (animal animation)
24~31	Pattern library 3 (animations of characters, cars, etc.)
32~39	Pattern library 4 (static patterns and text)
40~127	Pattern Library 5 (static geometric patterns)
128~135	Effect library 1 (dynamic geometric effect) corresponds to playlist 1
of the self-propelled mode	When the CH3 value is between 128-255, The 10

channels CH9 and CH11-19 are invalid.
135~143| Effect library 2 (dynamic space-time tunnel effect) corresponds to playlist 2 of self-propelled mode
144~151| Effect library 3 (dynamic wave effect) corresponds to playlist 3 of the self-propelled mode
152~159| Effect library 4 (dynamic animation continuous playback effect) corresponding to self-propelled mode playlist 4
160~255| Effect library 5 (dynamic landmark effect)

corresponds to playlist 5 of the self-propelled mode

CH4|

0~255

|

Select a pattern or effect from the CH3 pattern library and effects library, choose 1 for every 2 values

| When the CH3 value is between 128-255, CH4 0-1 means automatically looping the entire effect library, 2-255 select 1 effect for every 2 values.

CH5

| 0～26| Default animation and effect speed|
27～127| Select the dynamic speed of animations and effects|
128～255| Enter the voice control mode, adjust sensitivity from small to large|
CH6| 0~3| The original color of pattern|
4～51| Select the color of the entire image, choose 1 for every 4 values|
52～75| 2 color selection for the whole picture, one for every four values,

including 6 color combinations

|

76～99

| 3 color options for the whole picture, 1 for every 4 values, including 6 color combinations|
100～115| 4 sections for color selection, with 1 color selected for every 4 values, including 4 color combinations|

116～139

| 8 segments for color selection, with 1 color selection for every 4 values, including 6 color combinations|
140～191| 18 segments for color selection, one can be selected for every 4 values, including 13 color combinations|
192～215| 56 segments for color selection, with 1 color selection for every 4 values, including 6 color combinations|
| 216～239| 18 segments of color separation + black selection, choose 1 for every 4 values, including 6 color combinations|
---|---|---|---
240～243| Color writing mode 1,

seven colors are written from the start to the end

|

Writing speed is controlled by CH7

244～247| Color writing mode 2,

seven colors are written from the start to both ends

248～252| Color writing mode 3,

7 colors in 2 segments from the start point outwards

253～255

| Color writing mode 4,

7 colors in 3 segments from the start point outwards

CH7| 0| Color does not flow|
1~127| Color running/writing in a counterclockwise direction, speed change|
128~255| Colors run/write clockwise, from slow to fast|
CH8| 0| No flicker|
1～255| Strobe speed selection, from slow to fast|
CH9| 1～127| Select the overall centre size of the graphic, from large to small|
128～159| Graphics are selected by maximum reduction speed|
160～191| Graphics are selected by small magnification speed|
192～223| Select the speed of shrinking the graphics|
224～255| The graphics can be zoomed from a maximum to 10%

and then enlarged at a speed selected from slow to fast

|
CH10| 0~127| Line scan speed selection, from fast to slow| The slower the scan speed, the better the graphics,

but the flicker will also be

128～255

|

Click to select scan speed, from fast to slow

CH11| 0~127| Gradient painting mode 1, speed from slow to fast|
128～255| Gradient painting mode 2, speed from slow to fast|
CH12| 0~255| In horizontal position selection, the value 128 is the middle position| The part of the graphic that goes beyond the boundary is hidden and not displayed.
CH13| 0~255| In vertical position selection, the value 128 is the middle position
CH14| 1～127| Rotation Z-axis angle selection|
128～191| Z-axis clockwise rotation speed selection from slow to fast|
192～255| Z-axis counterclockwise rotation speed selection from slow to fast|

CH15

| 1～127| Rotation X-axis angle selection|
128～191| X-axis forward rotation speed selection from slow to fast|
192～255| X-axis reverse rotation speed selection from slow to fast|
CH16| 1～127| Rotation Y-axis angle selection|
128～191| Y-axis forward rotation speed selection from slow to fast|
192～255| Y-axis reverse rotation speed selection from slow to fast|
CH17| 1～127| Horizontal movement position selection|
128~159| Horizontal movement out of bounds mode, speed selection from right to left, slow to fast|
CH18| 1～127| Vertical shift position selection|
128~159| Vertical movement out of bounds mode speed selection from top to bottom, from slow to fast|
160~223| Vertical movement out of bounds mode speed selection from bottom to top, from slow to fast|
224～255| Move vertically to the boundary and return mode speed selection|
CH19| 1～127| X direction wave special effect speed selection, from slow to fast|
128～255| Y direction wave special effect speed selection, from slow to fast|

App Control

Scan the code below to install the App.
- Or download from the address below: http://www.gz-huoyue.cn/app/download.html.
- Bluetooth Connection
- To establish a Bluetooth connection, follow the steps below:
- Authorization on Android System:
- Make sure to authorize the active app to use Bluetooth devices in the settings of your Android system.
- Device Pairing Limitations (6-2): For some smartphones, due to system restrictions, it may not be possible to directly pair with newly discovered
- devices within the app. In such cases, it is necessary to first pair the device in the Android system settings before using it in the app.
Connect the device to your Cell Phone via Blue Tooth.
- A. Click the App
- B. Select device (DQF6)
- C. Select language (Chinese or English)
- Initial Setup: Downloading Light Library and Fonts To begin using the product, you will need to download the light library and fonts.

Operation

Navigate to Settings
Select Download Files
- Choose the file type and file you want to download
- Click on the Download button

Pattern Editing:

A pattern refers to a drawn design and is static.
Text input requires downloading fonts from the server or copying TF fonts to the “HYStageLight/JGDFile/Font” directory on the computer to be transferred to the phone.
During the editing process, to modify a pattern, use the Radio, Multi, or Frame tool to select the pattern block to be modified.
After selecting the pattern block, operations such as scaling and moving can be performed through gestures.
After selecting the pattern block, use the Node tool to adjust the spacing between nodes.
After selecting the pattern block, use the Color tool to adjust the colour of the lines.
Once the pattern is drawn, it should be saved for use in editing scenes.

Scene Editing:

A scene refers to a dynamic combination of patterns and actions.
The channel function of scene editing displays language and requires downloading the corresponding light library file.
When editing a scene, please note that when CH1 is equal to 0, the lights will be in BLACKOUT state.
Save the edited scene for use in editing sequences.

Sequence Editing:

A sequence refers to a list of scenes arranged in order.
Sequences need to be generated into TF1 files before they can be uploaded to the luminaire for playback.
Edited sequences can be saved for future modifications, facilitating easy adjustments for subsequent use (as the app cannot directly edit TF1 files).

Remote Control

After configuring all parameters, press the send button for the app to transmit the parameters to the light fixture. However, for the exceptions of closing, voice control, and locking scenes, these three settings will immediately send parameters to the light fixture.
Sequence play and scene play are temporary playback modes. After the light fixture is turned off and restarted, it will not return to sequence play and scene play modes.

Maintenance

Try to prevent dust, dirt and smoke oil from being artificially laid or even flowing into the lamp body, and try to keep the laser performer as clean as possible in the use environment;
Please use a professional glass cleaner and clean the reflective lens with a velvet cloth regularly every month to ensure maximum brightness output of the laser and extend the service life of the light source. Be careful not to wipe the lens with a wet cloth or other chemical solvents. The number of cleaning times depends on the lamp. The frequency of operation depends on the surrounding usage environment; it is recommended to clean it every 15 days.