Xiamen Padmate Technology T12 Slide 2 Bluetooth Earbuds User Manual

June 5, 2024
Xiamen Padmate Technology

Xiamen Padmate Technology T12 Slide 2 Bluetooth Earbuds

How to power on

  1. Take out the earphones from the stand, they will start up automatically and enter the pairing mode (make sure the stand is charged).
  2. Touch the button of the earphone to turn it on (the earphones must not be in the charging case and must be off).

Operating Instructions

First use: Power on – Turn on the phone settings – Bluetooth – Pamu Slide 2

Touch Button Left ear Right ear
In ear/Out of ear/Click on the touch button Play / Pause Play / Pause
Click on the touch button (incoming call status) Incoming call/hang up

Incoming call/hang up
Double click on the touch button (incoming call status)| Call rejection| Call rejection
Double click| Previous track| Next track
Slide up/down| Volume+/-| Volume+/-
Press and hold| Call Voice Assistant (SIRI)| ANC mode switch

Battery life: About 6 hours Mobile charging: About 3 times

Warm tips and safety information

Dear users, please carefully read and observe the following precautions before using and operating the device:

  1. Please fully charge the device before using, and do not use a charger with output higher than 5V/2A when charging.
  2. Please use this product in the temperature range of 0~45. If the product is not used for a long time, please charge it within 3 months to ensure good battery performance.
  3. After wearing the product for exercise, it is recommended to clean the sweat and water stains on the surface of the product with a dry towel, and let it dry for 2 hours. Please make sure that the charging port is dry before charging the earphones, so as to prevent short circuit caused by sweat from affecting the service life of the product during charging.
  4. This product contains batteries. Do not throw, press, disassemble or immerse the product in water. Keep it away from fire, water and high voltage equipment. Do not continue to use the product if it is overheated, dropped or damaged, or falls into liquid.
  5. Prolonged exposure to high volume may cause permanent hearing loss, and the minimum volume required is recommended.
  6. Please stop wearing the product and consult your doctor if you have skin discomfort or your ears are buzzing.
  7. If you are fitted with a pacemaker or other electronic medical device, please consult your doctor before using this product.
  8. Keep the product out of reach of children. Swallowing the product or the packaging bag and the small parts may cause suffocation.
  9. Please observe all signs and instructions that require you to turn off electronic devices or RF radio products in designated locations such as hospitals or airplanes.
  10. Please observe the traffic safety and local laws when using this product
For more

|
---|---

For a better listening experience, you can use Pamu APP to customize the function keys of earphones and constantly update and upgrade to the earphone firmware (Windows is not supported).

Firmware Upgrade: Fully charged – Pair with device – Open Pamu APP- Click: Add

Device > Connect > Firmware Upgrade > Upgrade (Do not use the earphones during upgrade)

For more instructions and safety information, please visit this QR code

Padmate Warranty Card
(Please keep this card as proof)

Customer Name:
Phone No.:
Product Model:
Product Series No.:
Purchase Stamp:
E-mail:
Address:
Date of Purchase:

Notice:

  1. Please fill out the form above with purchase stamp for the procedure of warranty.

  2. Any change on warranty card and invoice will result in invalidation.

  3. Please keep warranty card and invoice as the proof of warranty for the product.
    No replacement for warranty card or invoice.

  4. This warranty is valid within 1 year from the date of purchase.

Created by Padmate in Xiamen, China
Xiamen Padmate Technology Co.,LTD
Add:RM201,Huli Park No.37,Industrial Zone,Tong’an District,Xiamen,China
Xiamen,361021,China,P.R
www.padmate-tech.com
www.facebook.com/PadmateTech/

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement.  The device can be used in portable exposure condition without restriction
FCC ID: 2AJEO-T12

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals