Soundcore Boom 2 Plus Portable Bluetooth Speaker Instructions
- June 25, 2024
- Soundcore
Table of Contents
- Soundcore Boom 2 Plus Portable Bluetooth Speaker
- Specifications
- Product Usage Instructions
- Frequently Asked Questions (FAQ)
- At a Glance
- Installing the Strap
- Charging
- Charging External Devices
- Powering On/Off
- Using Your Speaker
- TWS (True Wireless Stereo) Mode
- LightShow
- Button Controls
- soundcore App
- Reset
- Specifications
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Soundcore Boom 2 Plus Portable Bluetooth Speaker
Specifications
- Charge Input: 5V3A, 9V3A, 15V2A, 20V1.5A
- Charge Output: 5V2A
- Battery Capacity: 7500mAh/7.3V
- Audio Output Power: 100W, Up to 140W
- Speaker Driver Frequency Response: Woofer: 4.5 inch x 2, 50W Tweeter: 0.75 inch x 2, 20W 40Hz-20kHz
- Charging Time: 3 hours (with 30W input)
- Play Time: 20 hours (varies by volume level and music content)
- Waterproof Level: IPX7
- Bluetooth Version: Bluetooth 5.3
- Bluetooth Range: 100m
Product Usage Instructions
Charging
To charge the speaker:
- Flashing Red : Low Battery
- Steady Red : Being Charged
- Steady White: Fully Charged
Powering On/Off
To power on/off the speaker:
- Press or Press and Hold for 2 Seconds: Power On
- Press and Hold for 2 Seconds: Power Off
Using Your Speaker
In Bluetooth Mode:
- Press the Bluetooth button to enter Bluetooth pairing mode.
- Select “soundcore Boom 2 Plus” from the Bluetooth list to connect.
Frequently Asked Questions (FAQ)
-
How do I reset the speaker?
To reset the speaker, press and hold the Bluetooth button and volume up button simultaneously for at least 4 seconds. -
How do I enter TWS (True Wireless Stereo) mode?
To enter TWS mode, with one speaker connected to a smartphone, press and hold the Bluetooth button for 2 seconds on two speakers.
At a Glance
| 1 | Power Button | 7 | PartyCast Button |
|---|---|---|---|
| 2 | Bluetooth Button | 8 | BassUp 2.0 Button |
| 3 | Volume Down Button | 9 | Type-C Charging Port |
| 4 | Play/Pause Button | 10 | AUX Input |
| 5 | Volume Up Button | 11 | LED Light |
| 6 | LightShow Button |
Installing the Strap
Attach the strap to both sides of the handle.
Charging
Charging Your Speaker
Use a certified C-C cable and charger to prevent any damage.
Charging External Devices
Use this speaker as a power bank to charge your portable devices or accessories.
Powering On/Off
- This speaker will automatically power off after 20 minutes of no audio input.
- You can also set an auto-power-off time in the soundcore APP.
Using Your Speaker
Bluetooth Mode
Press the Bluetooth button to enter Bluetooth pairing mode, then select
“soundcore Boom 2 Plus” from the Bluetooth list to connect.
- To re-enter Bluetooth pairing mode, press the Bluetooth button once.
- This speaker can only play music on one mobile device at a time. To play from another connected device, pause the device that’s currently active first.
- Each time you power on your speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.
TWS (True Wireless Stereo) Mode
- Two identical soundcore speakers can pair with each other for stereo sound. Both speakers can play the same audio (one as the left channel and the other as the right channel).
- With one speaker connected to a smartphone, press and hold the Bluetooth button for 2 seconds on two speakers to enter TWS pairing mode.
- To exit TWS mode, press and hold the Bluetooth button for at least 2 seconds.
PartyCast Mode
With one speaker connected to a smartphone, press the PartyCast button on up
to 100 soundcore speakers with PartyCast function to synchronize audio and
light.
soundcore speakers with PartyCast function can also be connected with this speaker.
LightShow
Button Controls
soundcore App
Download the soundcore app to enhance your experience.
- Product information: Check the product name and software version, or read the user manual.
- Firmware update: You will be informed once a new version of firmware is detected when you connect the speaker with the app.
- Battery status: Indicates the remaining battery level of your speaker.
- Volume control: Adjust the volume level via the app without pressing the buttons on the speaker.
- EQ settings: There are various preset EQ settings you can choose from in the app to optimize your experience while enjoying different music genres. soundcore Signature: Standard EQ mode optimized for well-balanced sound.
- soundcore Signature: Standard EQ mode optimized for well-balanced sound.
- Voice: Voices stand out more clearly from other ambient sounds.
- Treble Boost: High frequencies are enhanced.
- Balance: No enhancement for high-frequency and low-frequency sounds.
- Set auto-power-off time : Set an auto-power-off time. The speaker will automatically power off when the time is up. Voice prompt: Mute or restore the voice prompt while powering on/off.
Reset
Press and hold the Bluetooth button and volume up button simultaneously for at least 4 seconds to reset the speaker.
Specifications
| Charge Input | 5V⎓3A, 9V⎓3A, 15V⎓2A, 20V⎓1.5A |
|---|---|
| Charge Output | 5V⎓2A |
| Battery Capacity | 7500mAh/7.3V |
| Audio Output Power | 100W, Up to 140W |
Speaker Driver
| Woofer: 4.5 inch x 2, 50W
Tweeter: 0.75 inch x 2, 20W
Frequency Response| 40Hz-20kHz
Charging Time| 3 hours (with 30W input)
Play Time (varies by volume level and music content)| 20 hours
Waterproof Level| IPX7
Bluetooth Version| Bluetooth 5.3
Bluetooth Range| 100m
Hereby, Anker Innovations Limited declares that this device is in compliance with The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023. For the Statement of Compliance, visit the website: https://uk.soundcore.com/pages /psti-related.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>