PETKIT PURA X Self Cleaning Cat Iitter Box Instruction Manual

: June 29, 2024
: PETKIT

PETKIT PURA X Self Cleaning Cat Iitter Box Instruction Manual

A MESSAGE TO OUR VALUED CUSTOMERS

Thank you for choosing PETKIT PURA X Self-cleaning cat litter box. We at PETKIT have done our best to make life easier for you and your pet through the miracle of technology.
Before using this product, please carefully read the user’s manual. By setting up and using this product, you acknowledge that you have already read and accepted the safety measures listed below.
We are not liable and will not accept responsibility for any accidents or injuries that result from improper use of this product.
Concerning this notice, we reserve the rights of interpretation and revision.

USER SAFETY GUIDE

Failure to follow the safety measures outlined below can result in product malfunction or other unforeseen mishaps.
- Please install and use product exactly as instructed in the User’s Manual.
- Pets under the age of 6 months should not use this product.
- For indoor use only. Do not expose product directly to sunlight for extended periods of time. Do not place near an open flame.
- Even though this product uses low current, pets can still damage the power cord if they chew on it, preventing the product from getting power. Please ensure pets use product as intended.
- Only use the provided power adapter. Using a different power adaptor may result in damage to the product or potential safety hazards.
- Make sure the product remains parallel to the ground, otherwise the concentrated purifying liquid may pour out and cause product malfunction.
- Do not allow the bottom half of the product to be dipped or submerged in water.
- Repairs should be done under the guidance of a professional to avoid safety hazards.
- When leaving for a long period of time, make sure there is enough space in the waste collection bin.
- If you encounter any problems while using this product, please contact us immediately.

FUNCTIONS

1. xSecure – 6 Levels of Safety

Thermal sensor : The product will be suspended if the cat enters.
Infrared Sensor: The entrance is equipped with an infrared sensor that will halt product operation if it detects a cat nearby.
Weight sensor: the interior of the litter box is equipped with 4 weight sensors. If a cat enters the litter box, these sensors will detect the cat and cease the operation.
Anti-Pinch Infrared Sensors: There are two pairs of infrared sensors installed on the bottom Inside the litter box. While the product is operating, if a cat approaches, the device will immediately cease the operation.
Smart Detection, Remote Alerts: Use the APP to get smart updates and early alerts of abnormal activity.
Accident Protection System: Sensors system will be activated before operating. The product will shutdownand send an alert if any of the sensors malfunction.

2. Use multiple types of cat litter.

The cat litter filter net is effective at filtering both plant litters and bentonite litters, and mixture litters as well.

3. Anti-bacterial Odor Removal (Using the Odor -Removal Device and Concentrated Purifying Liquid)

Through experimental verification, this product has proven to be effective at removing unpleasant odors and formaldehyde, while also killing common forms of harmful bacteria. (colon bacillus, staphylococcus aureus, pseudomonas aeruginosa, candida albicans, salmonella typhimurium, klebsiella pneumoniae, etc.)

PACKING LIST

PRODUCT DESCRIPTION

SCAN THE QR CODE AND WATCH THE SET UP VIDEO

Scan QR Code to Watch a Video on How to Set Up and Use Your Litter Box

TAKE OUT CYLINDER

1. To unlock the cylinder that holds the concentrated solution, twist the release button for the cylinder in a clockwise direction. The release button is located on the end of the cylinder on the back of the litter box. *If the covering has not already been removed from the litter box, make sure to remove it by sliding it off before taking out the cylinder.

2. Use both hands to lift upward as picture instructed.

ADD THE PURIFYING LIQUID

To ensure the effectiveness of odor removal, please only use the “PETKIT Concentrated Purifying Liquid for the PETKIT Smart Automatic cat Litter Box”.

INSTALL THE CYLINDER AND POUR IN THE LITTER

1. Use both hands to lift upward, reinstall the cylinder into the back of the litter box.

2. Pour the cat litter into the opening in the cylinder. The amount of cat litter should not exceed the MAX Line indicated inside the cylinder.)

REPLACE THE LITTER BOX COVER

Rotate the locker counterclockwise which is located on the back of cat litter box.
Place the cover back on the litter box. (*The PETKIT logo should face the front opening of the litter box once the cover is placed properly.)

INSTALL THE TRASH BAG

INSERT THE LITTER PAD

Spread out the litter pad and place the two front legs of the litter box in the left and right leg holes of the litter pad. If this step is not done as instructed, it may render the liquid detection function of the odor-removal device ineffective and influence the overall lifespan of the odor-removal device.

The orange area on the litter pad is the effective range of the thermal sensor. Once the cat enters this area, it will be recognized by the sensor, and the device will automatically cease operation.

PLUG IN THE POWER CORD, START USING

Take the cord adapter and attach is to the lower slot on the back of the litter box, which is near the bottom. Then plug into a power socket.

USE THE APP

1. Scan to download the PETKIT APP. After registering in the APP, follow the prompts to your account to your PETKIT Smart Automatic cat Litter Box.

2. Use the App to get real-time information and notifications about cat’s weight, as well as time and frequency of using the litter box.
*Automatic cleaning and periodic cleaning can only be accessed through the APP.

How to use the menu: Short press the menu button to navigate the menu. The screen will display different functions to choose from. Short press OK to choose a function.

DISPLAY GUIDE

SCAN THE QR CODE AND WATCH THE CLEAN UP VIDEO

PRODUCT CLEANING

Remove cylinder periodically for cleaning.

*It is recommended to wait until the level of kitty litter has gone below the “Empty Litter Line” before removing the cylinder for cleaning.

1. The “Empty Litter Button”:
In order to empty out the litter as quick as possible, do not allow the cat to enter the litter box while the emptying process is underway. (*Note: The cylinder can tip easily when full of litter. Please wait until the litter level has gone down before removing. Take careful note of the litter level shown on the “Empty Litter Line” located by the trash symbol on the inside of cylinder. Also check the space remaining in the waste collection bin.)
2. Steps to remove cylinder:
① Take oﬀ the upper cover.
② Rotate the ‘locker’ into UNLOCKED position.
③ Lift the cylinder upwards and take out.

FAQ

Q: Why do rollers rotate when I didn’t perform any operation?
A: The machine automatically detects the position between the rollers and returns them to the original positions.

Q: Why does it show prompt that the lid is not placed when I put the lid on the main unit?
A: Check whether the upper lid for the main unit is correctly placed. (PETKIT logo should be on the display side)

Q: Why do the rollers stop when working?
A: When sensors system detects nearby moving subjects, it will shut down the operation for safety.

Q: Will the waste collecting bin full even if the screen doesn’t display so?
A: The sensors on the top of the bin will detect whether it is full. To prevent blocking the sensors, squeeze the garbage bag down to the ring.

Q: Why is the display screen oﬀ?
A: The display screen will enter the screen protection mode with a dynamic PETKIT logo when the product is not operating for a period of time. The screen will also be turned oﬀ when the App shuts it down. You can also modify the brightness level.

Q: How to use App’s smart setting?
A: That smart settings for cat toilets include automatic cleaning, set cleaning, and regular deodorization; when there are few cats in the family (within 3), we recommend using the automatic cleaning function. We recommend using the set cleaning function to avoid cleaning too frequently; the device will automatically deodorize during the cleaning process, and regular deodorization can be applied according to the circumstances.

SPECIFICATIONS

Disposal
The European directive 2012 / 19 / CE on Waste Electrical and Electronic Equipment(WEEE), requires that old household electrical appliances must not be disposed in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation,that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and ；(2) this device must accept any interference received, including interference that may cause undesired operation.

FCC warning:
Any Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

IC warning

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

The device has been approved for use in EU countries and is therefore provided with the CE mark.

All necessary documentation is available on the website: www.electric- collars.com
Changes to technical parameters, properties and printing errors reserved.

Service center and distribution

Reedog, sro
Sedmidomky 459/8 101
00 Prag

Phone: +1 646 980 4569ue 10

Email: info@electric-collars.eu

Read More About This Manual & Download PDF: