Nutek BT229MW1 Hands Free Wireless Speaker-Complete Features/Instruction Guide

Nutek BT229MW1 Hands-Free Wireless Speaker

Specifications

• Product Dimensions
  16 x 14 x 36 inches

• Item Weight
  15 pounds

• Batteries
  1 Product Specific batteries

• Power Source
  Battery Powered

• Special Feature
  Waterproof, Radio

• Mounting Type
  Tabletop

• Controller Type
  Battery Powered

• Brand
  Nutek

Nutek Speaker Two pieces make up a wireless speaker: an RF transmitter unit and the main speaker unit that combines the loudspeaker and an RF receiver. The transmitter is connected to any audio device with an audio output, including high-end audio equipment, televisions, laptops, MP3 players, etc.

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this speaker near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this speaker during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the speaker has been damaged in any way, such as if the speaker is dropped, exposed to liquids, or does not operate normally.
• Never expose the product to fire as this could result in personal injury.
• Do not store the product in an extremely cold or warm environment.
• Never dismantle the product.
• Never let children play with the product.
• Do not expose the product to dampness or moisture.
• The product should not be exposed to dripping or splashing.

How to pair a Bluetooth speaker with a source device

Preparation
Before you start the pairing operation, please confirm the following:

• Refer to the operating instructions or help guide for model-specific information.
• Place the source device within 1 m (3 feet) of the Bluetooth speaker.
• Make sure the Bluetooth speaker and source device are both sufficiently charged.

Bluetooth Speaker pairing procedure

Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases

1. Turn on the speaker. The (power) indicator will light up or/and the (Bluetooth) indicator begins to flash.
   Notes
   When you turn on the speaker for the first time after purchase, the (Bluetooth) indicator will begin to flash quickly and the speaker automatically enters pairing mode. Proceed to step ３.
   When you turn on the speaker, the speaker tries to make a Bluetooth connection with the last connected Bluetooth device. If that device is nearby and its BLUETOOTH function is on, the BLUETOOTH connection will be established automatically and the (Bluetooth) indicator will stay lit. When you want to connect another Bluetooth device, terminate the current Bluetooth　connection first, by operating the currently connected Bluetooth source device.

2. Press and hold the (power) PAIRING button until you hear the voice guidance and the (Bluetooth) indicator begins to flash quickly. The speaker enters pairing mode.

3. Perform the pairing procedure on the Bluetooth source device to detect the speaker.
   NOTE
    Complete pairing operations of the source device within 5 minutes. The pairing mode of the speaker ends after 5 minutes. If pairing mode ends, you must start pairing operations for the speaker over from the beginning.

4. Check that the (Bluetooth) indicator has switched from flashing to a steady light. When the speaker is successfully connected to the source device, the (Bluetooth) indicator will stay lit.

Frequently Asked Questions

How should my Nutek speaker be connected?

To turn on your speaker, hold down the “” switch for a few seconds. When you start pairing mode, the LED light will begin to flicker blue. 3). Navigate to your Bluetooth audio source’s Bluetooth Manager. For more details, please consult the user guide for your Bluetooth audio source.

How do you activate pairing mode on a wireless speaker?

Choose Bluetooth options from the settings menu on your phone (both Android and iOS). Under Bluetooth settings, navigate to the other devices area. Ensure that discoverable mode is selected on your phone. Choose the speaker you want to pair by clicking on it under “other devices.”

How can I restore the factory settings on my Bluetooth speaker?

You should only need to do this briefly with most Bluetooth speakers. The power and Bluetooth buttons must be pressed and held simultaneously in order for almost every Bluetooth speaker to be reset.

Why can’t Bluetooth locate devices?

Your phone may not be “discoverable” even if Bluetooth is enabled. Therefore, a Bluetooth device that you haven’t yet associated with is unable to view your phone. Open the primary Bluetooth settings to make it visible to other devices. As long as you are on that screen, Android phones continue to be discoverable.

Why won’t my iPhone pair with my Bluetooth speaker?

Ensure that your iOS or iPadOS device and Bluetooth accessories are in close proximity to one another. Restart your Bluetooth device after turning it off. Make sure your Bluetooth accessory is turned on, fully charged, and plugged in. Check to check if your attachment needs new batteries if it does.

Why does the blue LED on my Bluetooth speaker flash?

A strong connection may be indicated by a blue light that blinks continuously. The headphones may be in pairing mode if they have a slow blue light that pulses. Blinking red and blue lights are the most typical pairing mode light pattern.

Can Bluetooth speakers be synced?

You might be able to connect to two Bluetooth speakers at once, depending on the hardware you have. Newer technology has Bluetooth 5, which enables simultaneous pairing with two devices. Similar solutions have been developed by other device manufacturers.

What purpose does a wireless speaker serve?

With the exception of a transmitter—instead of wires—that sends a signal from the source to the speakers, wireless speakers function essentially the same way as traditional speakers do.

What are the uses of speakers?

They are used to create surround sound, provide audible sound for the listener, and boost the bass by using a subwoofer. There are also external speakers on the market that need to be connected to a computer or other device in order to emit sound. v

How can I link my wireless speakers to my computer?

Choose Start > Settings > Devices > Bluetooth & other devices > Add Bluetooth or other device > Bluetooth from the Start menu on your computer. Select the device, adhere to any extra instructions that may pop up, and then click Done.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>