Nutek EP1021 Earbud Headphones Operational Guide
- June 4, 2024
- Nutek
Table of Contents
Nutek EP1021 Earbud Headphones
Specification
- Special Feature Android Phone Control
- Included Components Headphone
- Connectivity Technology Wired
- Headphones Jack 5 mm Jack
- Model Name EP1021
- Product Dimensions 12 x 6 x 11 inches
- Item Weight 81 ounces
- Color Black
What’s in the box
- Headphone
Product Description
Frequency range 20Hz-20, 000 Hz. This product is manufactured in Switzerland. Satisfaction ensured. Earbud headphones with 3. 5mm plug and four foot cord.
Features
- Professional quality
- Satisfaction ensured
- This product is Manufactured in Switzerland
- Connectivity technology Wired
- Sound Mode Stereo
- Cable Length 4 ft
Note : Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.
How to Use
You can use the earphones by following the given steps
- Plug the 3.5mm plug into the port of the phone.
- Now put the earphones ON.
- Now play music from your phone.
- You will start hearing it from earphones.
Care and Maintenance
- Wipe after every use.
- Do not let others use your earphones.
- Lightly brush earwax or debris off the driver unit.
- Don’t forget the jack.
- Don’t put them directly in your pocket.
- Don’t dangle the wires.
- Keep your wires untangled.
- Don’t roll your cables in tight loops.
Frequently Asked Questions
Why is my one Nutek wired earphone not working?
Your audio settings may limit the audio output of your headphones to one ear. Verify that the mono option is off in the audio properties of your device. Make sure the voice volumes on both earbuds are equal as well.
Why Nutek wired earphones get damaged quickly?
The most frequent causes of earphones breaking so readily are the following seven factors: pulling or squeezing the cords when removing the earbuds. allowing headphones to hang from beds, couches, and tables. Twisting your headphones while you sleep.
Why do Nutek wired earphones sound better?
Wired headphones give outstanding sound quality using analogue transmissions. This can carry more data than digital signals like Bluetooth. Your audio will therefore be delivered to you with less processing. So that they can deliver the audio in its original resolution and without any compression.
How can I protect my Nutek earphones?
• Clean up after each usage.
• Refrain from letting anyone else use your headphones.
• Gently wipe off any dirt or earwax from the driver unit.
• Remember to bring the jack.
• Delay putting them in your pocket.
• Prevent letting the cables hang.
• Maintain orderly and organised wiring.
• Aim to avoid tightly looping your cables.
What happens if we use Nutek earphones too much?
Hearing loss from noise from earphone use is possible, however it often develops over time. Because of this, many people do not realise they have a problem until it is too late. Hearing loss manifests as ringing, buzzing, or roaring in the ears after hearing a loud noise.
Is it OK to use Nutek wired earphones?
The vast majority of scientific evidence shows that the radiation from both Bluetooth and wired headphones is safe.
Why do people use Nutek wired Earphones?
You never have to be concerned about running out of battery life or remembering to plug in corded earbuds because they don’t require charging. They are also, in my opinion, far harder to forget.
How many hours can we use Nutek earphones?
The amount of time spent exposed to noise is another important factor to take into account when analysing headphones and hearing loss. Use MP3 players at volumes no higher than 60% of their maximum for no more than 60 minutes each day, suggests Dr.
Will Nutek earphones damage hearing?
If the sound intensity is under 60 dB, hearing damage is unlikely to happen even after extended exposure. Hearing loss, however, could result with continuous, repetitive exposure to loud noises above 85 dB.
Is it good to use Nutek earphones everyday?
Under normal circumstances, problems with in-ear devices are rare. However, wearing earbuds for a long time—say, all day—can compress earwax, making it less fluid and more challenging for the body to properly expel. Compress the earwax so tightly that the body becomes irritated.
What are the disadvantages of Nutek Earphones?
hearing impairment. If you keep your earphones plugged in for too long, you’ll
wind up injuring yourself.
ear infections.
ear wack
ears ache.
loss of hearing due to noise (NIHL)
Tinnitus.
Hyperacusis.
What are the benefits of Nutek earphones?
Headsets have a number of advantages over standard telephones. They provide better music quality, and consumers may change the level of the sound to suit their preferences by turning the amplifier up or down.
Why do Nutek earphones have rubber on them?
They are positioned such that they effectively enclose your ear. They won’t fit in without them, and even if they did, it would be uncomfortable because they wouldn’t completely close off the space, leaving it devoid of bass. In- ears are not the same as earbuds, to be clear. In-ear headphones feature a tip that creates a seal; earbuds don’t.
Are bigger Nutek earphone tips better?
The big ear tips are superior to the other sizes in terms of noise cancellation at lower frequencies, making them the ideal option for our text fixture. We can exclude the small tips (green) from this scenario because they are ineffective at blocking out much outside noise.
What type of device is Nutek earphones?
In order to listen to private audio without disturbing those nearby, headphones can be connected to a computer, laptop, smartphone, mp3 player, or other device. They are plug-and-play devices, therefore there is no need for installation before utilising them.