hp 738PU 37.5 inch WQHD Plus Curved Monitor Instruction Manual

: June 25, 2024
: HP

Table of Contents

Product End-of-Life Disassembly Instructions
Items Requiring Selective Treatment
Tools Required
Product Disassembly Process
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

738PU 37.5 inch WQHD Plus
Curved Monitor
Instruction Manual

Product End-of-Life Disassembly Instructions

Product Category: Monitors and Displays

Marketing Name / Model
[List multiple models if applicable.]

HP Series 7 Pro 37.5 inch WQHD + Thunderbolt 4 Monitor – 738pu

Purpose : The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP Inc. products to remove components and materials requiring selective treatment, as defined by EU directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
NOTE : Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking code on the plastic part. For any questions on plastic marking or identification of location of parts or components requiring selective treatment, please contact HP’s Sustainability Contact.

Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment. An “X” in the list of components and parts indicates the product contains the component or part requiring selective treatment

Item Description

|

Components and parts requiring selective treatments

| Quantity of items included in product
---|---|---
Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) with a surface greater than 10 sq cm| ☒ Main board (MB) PCB
☐ Solid state drive (SSD) PCB
☐ Wireless WAN module (WWAN) PCB
☐ Touch module PCB
☒ Power supply PCB
☐ External Keyboard (KB)
☐ External Mouse
☒ Others: TBT4 BD, Audio BD. USB Sunk BD, USB Bottom BD, Driver BD, OSD BD| 8
Batteries, excluding Li-Ion batteries. This includes standard alkaline, coin or button style batteries| ☐ RTC/CMOS battery
☒ Others: | 0
Li-Ion batteries. Includes all Li-Ion batteries if more than one is provided with the product (such as a detachable notebook keyboard battery, etc.)| Li- ion battery(ies) are attached to the product by:
☐ screws
☐ snaps
☐ adhesive
☐ other. Explain | 0
Mercury-containing components. For example, mercury in lamps, display backlights, scanner lamps, switches, batteries| | 0
Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm. Includes background illuminated displays with gas discharge lamps| ☒ Panel LCD| 1
Cathode Ray Tubes (CRT)| | 0
---|---|---
Capacitors / condensers (Containing PCB/PCT)| | 0
Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height| ☒ Power Supply capacitor(s) or condenser(s)| 2
External electrical cables and cords| ☒ AC power cord
☒ HDMI and DP cables
☒ Other: Type-C cable, HDMI Cable, DP Cable, TBT4 Cable| 5
Gas Discharge Lamps| | 0
Plastics containing Brominated Flame Retardants (not including external electrical cables and cords, PCBs or PCAs already listed as a separate item above)| | 0
Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner. Include the cartridges, print heads, tubes, vent chambers, and service stations.| | 0
Components and waste containing asbestos| | 0
Components, parts and materials containing refractory ceramic fibers| | 0
Components, parts and materials containing radioactive substances| | 0
Components containing chlorofluorocarbons (CFC), hydrochlorofluorocarbons (HCFC) or hydrofluorocarbons (HFC), hydrocarbons (HC)| | 0

Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.

Tool Description	Tool Size (if applicable)
Screwdriver	Philip #1
Screwdriver	Philip #2
Knife	N/A
Film	N/A

Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment including the required steps to remove the external enclosure.

Remove tape & rubber From Display Head
Remove Stand from Display Head
Remove Rear Cover from Display Head
Remove speaker & hinge From Display Head
Remove cable, AL foil& bottom USB BD From Display Head
Remove Bracket Assembly from Display Head
Remove MC Assy, FC Assy & hinge bracket From Display Head
Disassembly MC Assy
Disassembly RC Assy
Disassembly bracket Assy
Disassembly stand Assy.
Disassembly panel module Assy

3.2 Location of components requiring selective treatment. The photos and/or graphics below identify the location of the parts or components requiring selective treatment within the main unit. For End-of-Life product disassembly instructions of external accessories including external power supply (EPS), external keyboard (KB) external mouse and external cables and cords, refer to the following URL: End-of-Life Product Disassembly Instructions (hp.com)

Remove rubber From Display Head
Remove Stand From Display Head
Remove Rear Cover From Display Head
Remove speaker and hinge From Display Head 4.1 Remove 1PCS acetate tape
4.2 Remove speaker connector
4.3 Release 10PCS screw and then remove speaker & stand hinge
Remove cable, AL foil& bottom USB BD From Display Head 5.1 Release 2PCS AL foit
5.2 Release 3PCS cable connector
5.3 remove ALS BD
5.4 Remove 1PCS screw then remove USB bottom BD
Remove Bracket Assembly From Display Head
Remove MC Assy , FC Assy & hinge bracket From Display Head
Disassembly MC Assy
Disassembly RC Assy
Disassembly Bracket Assy 10.1 Release 14PCS M3 screw 1PCS M4 screw and
PCB cable then remove PCB
10.2 Remove AC connector
Disassembly Stand Assy 11. Release 2PCS thumb screw and then remove stand column
Disassembly panel module Assy****
Disassembly Instructions| 738pu_Display_Fleet-Fox
---|---
AC Power Cord|
Type-C Cable|
HDMI Cable|
DP Cable|
TBT4 Cable|