POCOCO DQ-R60 DJ Disco Stage Party Lights User Manual
- June 14, 2024
- pococo
Table of Contents
**POCOCO DQ-R60 DJ Disco Stage Party Lights User Manual
**
Safety Notes
This laser light is class1 product, please avoid long-term viewing of laser.
It is prohibited to let the kids play with this product. Before operating this laser light, everyone must read the safety notes.
This product is used indoor only, IP20. Don’t use it in Moist, overheat, dusty environment. It should be operating in a nice aerating environment, keep far away from flammability materials or liquid.
Please use the cable provided in the packing. If need to replace the cable, please refer to the product parameter. If need to extend the power cables, the extended cables’ diameter must meet qualified requirement; please don’t extend the cables too long, otherwise the adaptor will be broken easily.
PACKAGE CONTENT
Name | QTY |
---|---|
Party Light | 1PC |
Power Cord | 1PC |
Mount | 1PC |
Screws | 2PCS |
User Manual | 1PC |
Front Cover
Rear Cover
Remote Control Function
| Power on/of
---|---
| R STOP Pattern effects stay static.
| Turn on the strobe mode.
| Red and Green laser light changes while the LED Background color is always
Blue.
| RLED Background color changes among Red, Green and Blue, while laser light
is always Red and Green.
| LED Background color with JUMP while laser light is always Red and Green
| Lights work at a high level of sensitivity, light works immediately with
some Sound, and turn off immediately without Sounds.
| Motor works at faster speed, light effects will change and cycle with the
music.
| Motor works at slower speed, light effects will change and cycle with the
music
| Red laser is always working. It can be matched with different LED Background
Color. Press this button can cancel and choose the LED Color.
| LED Background color changes automatically
| Green LED Background G color only
| Red and blue LED Background color.
| Green and blue LED Background color.
| Set timer for 6 hours. The light will turn off after 6 hours.
| Red and green laser is always working. It can be matched with different LED
Background Color. Press this button can cancel and choose the LED Color
| Green laser is always working. It can be matched with different LED
Background Color. Press this button can cancel and choose the LED Color.
| Red LED Background R color only.
| Blue LED Background B color only
| Red and green LED Background color.
| Red Green Blue LED Backgroundcolor.
| Set timer for 3 hours. The light will turn off after 3 hours.
| Set timer for 8 hours. The light will turn off after 8 hours.
Product Parameter
Model Number | DQ-R60 |
---|---|
LED diode: | RGB 3IN1 Led |
Power supply : | AC100-240V, 50/60Hz |
Working environment: | 10-40℃ indoor |
Laser Classification: | Class1 |
Power adaptor: | DC5V, 1A-2A |
Preheat time: | 2-8 minutes |
Control mode: | Manual, Remote control |
Troubleshooting
Problem | REMEDY |
---|---|
Can not turn on |
- check whether the power switch is On (Page 4) which is at the rear panel of the device.
- As this is USB Powered, please check whether use the original USB Cable to connect the power plug, you can also attach the cable to a USB power bank or PC.
- If the above solutions do not work, contact the support team via email support@pococo.net.
The remote control does not work|
- Firstly, please check whether the protective film has been removed.
- This is Infrared Remote, so please direct the remote control to the IR Remote sensor (Page 3) in the front panel of the device.
- If still not working, then please replace the spare button cell to check whether works.
- If the above solutions do not work, contact the support team via email support@pococo.net
.
Can you keep this on a single pattern or does it always change?| You can set
the pattern you want, firstly please choose the pattern you want, then press
the “Motor Stop” Button with remote control. Please refer to the Remote
Control Function (Page 5, 6)
How much of an area does this cover?| If hanging the party lights on wall or
roof over 7ft height, the cover area is 800ft² at most in oblique angle, the
cover area is 400ft² in right angl
Can I have it changed to music?| Yes, please press the Sound1/2/3 Button on
Remote Control, then it will sync with the music. The sound should be over 50
decibels. The further the distance is, the louder the sound should be
Warranty
We provide 2 year warranty for this appliance. Please email our support team
support@pococo.net if you have any questions.
Please attach your Order ID in your email, we will get back to you within 24 hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>