Cloud Electronics CDR-3 Surface Mount User Guide
- June 24, 2024
- Cloud Electronics
Table of Contents
Cloud Electronics CDR-3 Surface Mount
Specifications
- Model: CDR-3
- Compliance: FCC Part 15
- Installation: Professional installers only
- Mounting: In-wall with suitable electrical box and screws
- Safety: Follow provided safety guidelines
- Regulations: Compliance with local, state, federal, and industry regulations
Product Usage Instructions
Installation
- Ensure you have a commercially available in-wall mounting electrical box and installation screws suitable for your wall material.
- Feed the ethernet cable through the electrical box.
- Mount the CDR-3 securely in the electrical box following the provided guidelines.
Safety Instructions
- Read and keep the provided safety instructions.
- Avoid exposing the product to rain or moisture to prevent fire or shock hazards.
- Clean the product with a soft, dry cloth only.
- Do not install near heat sources or water.
- Refer servicing to qualified personnel if the product is damaged or malfunctions.
Regulatory Compliance
Ensure compliance with local building codes and regulations when installing
the CDR-3. Consult local authorities if needed.
Product Limitations
Avoid installing the product in areas prone to condensation or indoor water
facilities to prevent damage.
FAQ
-
Q: Can I install the CDR-3 myself?
A: No, this product is intended for installation by professional installers only for safety and compliance reasons. -
Q: What should I do if the product gets damaged?
A: Refer all servicing to qualified service personnel to ensure proper repair and safety. -
Q: Can the CDR-3 be exposed to water?
A: No, to prevent fire or electrical shock hazards, do not expose this product to rain, liquids, or moisture.
Thank you for purchasing the CDR-3.
Before installing and using this unit, please read this guide carefully.
Ensure to store this document in a safe place for future reference.
Note this product is intended for installation by professional installers
only. This document is intended to provide professional installers with basic
installation and safety guidelines for this product in typical fixed-
installation systems.
Please read this document and all safety warnings before attempting
installation.
Please note that this product does NOT include the in-wall mounting electrical
box and installation screws required to install the controller.
Use a commercially available in-wall mounting electrical box and installation
screws suitable for the specific wall material and installation situation.
Important Safety Instructions
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a soft, dry cloth.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Only use attachments/accessories specified by the manufacturer.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
All Cloud Electronics products must be installed in accordance with local,
state, federal and industry regulations. It is the installer’s responsibility
to ensure installation of the loudspeakers and mounting system is performed in
accordance with all applicable codes, including local building codes and
regulations. Consult the local authority having jurisdiction before installing
this product.
Do not mount the product in locations where condensation may occur.
This product is not intended for installation or use in indoor water facility
areas (including, without limitation, indoor pools, indoor water parks, hot
tub rooms, saunas, steam rooms and indoor skating rinks).
To reduce the risk of fire or electrical shock, do NOT expose this product to
rain, liquids or moisture.
Keep the product away from fire and heat sources.
Do NOT place naked flame sources, such as lighted candles, on or near the
product.
Do NOT make unauthorized alterations to this product.
For Customers in Europe
Information to the User
This product complies with the European Directives request and the other
Commission Regulations.
Environmental Statement
This product complies with international directives, including but not limited
to the Restriction of Hazardous Substances (RoHS) in electrical and electronic
equipment, the Registration, Evaluation, Authorization and restriction of
Chemicals (REACH) and the disposal of Waste Electrical and Electronic
Equipment (WEEE).
Consult your local waste disposal authority for guidance on how properly to
recycle or dispose of this product.
QUICK START GUIDE
CDR-3
For Customers in the U.S.A
Information to the User
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
Changes or modifications to this equipment not expressly approved by Cloud
Electronics for compliance could void the user’s authority to operate this
equipment.
Product Features
CDR-3 is a wall-mounted device designed for the remote control of volume level
and input source selection of CXA amplifiers.
Note that each CDR-3 device can be assigned to one individual zone only. For
example, the remote control of four zones would require four devices – each
assigned to a different individual zone.
Set-up & Operation of CDR-3
For guidance on how to connect, configure and operate the
CDR-3, please refer to the CDR-3
INSTALLATION GUIDE / USER MANUAL. This document can be found on the product’s
webpage – for convenience, scan the QR code shown at the bottom right-hand
corner of this quick start guide.
Product Compatibility
CDR-3 devices are only compatible with CXA amplifiers running firmware version
(X.Y.Z) or later.
Ensure to update the firmware installed on the CXA amplifier before connecting
CDR-3 devices.
Visit Cloud Electronics to check and obtain the latest firmware.
Specifications
- Input Rating
- Connector: RJ45
- Cables: Category 5e or faster STP cables
- PoE Class I device, 48V
- Power Consumption
- 4Wmax
- Dimensions (H x W x D)
- EU: 86mm x 86mm x 49mm
- US: 114,3mm x 69,8mm x 49mm (4,5in x 2,75in x 1,93in)
- Weight
- EU: 120g / US: 120g (4.23oz.)
- Operating Temperature Range
- 0-40°C (32-104°F)
Mounting CDR-3
- Feed the ethernet cable through the electrical box.
- Mount the electrical box into the wall.
- Connect the ethernet cable to the CDR-3.
- Click off the front panel. Screw the CDR-3 unit into the electrical box.
- Put the front panel on – and click it into place.
Cloud Electronics Ltd, 140 Staniforth Road, Sheffield, S9 3HF, UK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>