AIR LAB ACY2WH Air Purifier User Manual

AIR LAB ACY2WH Air Purifier User Manual

Safety

BEFORE USING THIS DEVICE, READ ALL INSTRUCTIONS AND CAUTIONARY MARKINGS IN THIS MANUAL AND ON THE APPLIANCE

• Ensure that the device is fully assembled in line with the instructions before use. Do not dismantle the device.
• Use ONLY as described in this manual.
• Suitable for dry locations ONLY. Do not use the device outdoors or on wet surfaces and do not expose to water or rain.
• Do not operate any appliance with a damaged cable or plug.
• If the device is not working as it should, has received a sharp blow, has been dropped, damaged, left outdoors, or dropped into water, do not use and contact Air Lab Global Limited.
• Do not use any cleaning agents or lubricants on this device. Unplug before cleaning or carrying out any maintenance.
• Do not stretch the cable or place the cable under strain. Keep cable away from heated surfaces.
• Do not route the cable under furniture or appliances. Do not cover cable with throw rugs, runners or similar coverings. Arrange cable away from traffic area and where it will not be tripped over.
• This device can be used by children aged from 8 years and above and persons with reduced physical, sensory or reasoning capabilities, or lack of experience and knowledge, ONLY if they have been given supervision or instruction by a responsible person concerning use of the device in a safe way and understand the hazards involved. Cleaning and maintenance should not be performed by children without supervision.

Safety Precautions

• Do not carry out any maintenance or repair work other than that shown in this manual, or advised by Air Lab Global Limited, its service agent or a similarly qualified person in order to avoid a hazard.
• Do not used the device as a toy. Close attention is necessary when used by or near children. Children should be supervised to ensure that they do not play with the device.
• Do not put any object into the air inlet or the outlet. Do not use with any air inlet or outlet blocked.
• Do not use near furnaces, fireplaces, stoves or other high temperature heat sources.
• Do not use in conjunction with or directly next to an air freshener or similar products. Do not spray or apply perfumes directly on or near the filter. Keep essential oils and chemicals away from the device.
• Always disconnect the plug from the socket before inspecting for problems. If the device will not operate, first check the mains socket has an electricity supply and that the plug is properly inserted into the socket.
• When removing or replacing the filter, make sure to keep your fingers clear.

Unit and components

Getting started

Step 1
Unpack the package and take out the device.

Step 2
Flip the device, rotate the bottom cover in an anticlockwise direction to unlock.

Step 3
Take out the filter with packaging, then remove the filter from the packaging.

Step 4
Put back the filter without packaging.

Step 5
Close the bottom cover and rotate clockwise towards the lock direction.

Step 6
Plug in the power adapter line to the device.

Step 7
Plug the power adapter into the socket.

Step 8
Press the on/off key to run the device.

Product Structure

Buttons

Press to turn On or Off

Turn on / off the air purifier by pressing the On/Off button on the control panel.

Airflow speed

Press to switch between the different airflow speeds.
Available airflow speed options are: 1, 2, 3 and 0. Auto mode is set as 0. Adjust the airflow using the buttons on the control panel.

Negative ion purification

Press to Activate or Deactivate.
Activate the negative ion purification function by pressing the button on the control panel.

Sleep mode

Press to Activate or Deactivate.
Activate sleep mode by pressing sleep button which will turn off the screen display and the PM2.5 status indicator with ultra-low speed of the fan. Press any button to deactivate sleep mode.

Timer

Press to Activate or Deactivate.
Activate the timer function by pressing the button on the control panel (1 press = 1 hour). The timer starts from 1 – 12 hours, the power will be turned off when the count down is finished.

Child lock

Press to Activate or Deactivate.
Activate the child lock function by pressing the button on the control panel, the machine will lock itself causing other buttons cannot be used, until 5 seconds of long pressing the button to unlock the child lock.

UVC Disinfection light

Press to Activate or Deactivate.
Activate the UVC Disinfection light function by pressing the button on the control panel.

Check filter indicator

Press and hold the button for 5 seconds to reset the timer. When the accumulated usage time of the filter reaches 2000 hours, the check filter indicator will be flashing.
Note: The check filter indicator only indicates the end of a 2000 hours period. As suggested, the average lifespan of a filter is 2000 hours. However, the filter’s life span could be extended due to low indoor air pollution.

Air quality information

The air quality level for PM 2.5 particles is indicated using a color scale on the display on top of the device.

Product Specifications

Maintenance & Cleaning

• Use ONLY dry and soft cloth to clean the surface of the device including air inlets and outlets.
• Clean the sensor regularly with cotton buds, to maintain sensor accuracy and ensure the continuing high performance of the device.

Cautions:

• Ensure the device is unplugged.
• Do not use detergents or polishes to clean the device.
• Never immerse the device or accessories in water or any other liquid.

Filter Replacement:

• After 2000 hours usage of the filter, the check filter indicator light will be flashing. Take out the filter and check its color. If part of the filter turns dark grey or black, the filter should be replaced. If the filter is still white or light grey in color which means the filter can be used further, press and hold the check filter indicator button for 5 seconds to reset the filter timer.
• When replacing the filter, please make sure the device is not connected to power, rotate anticlockwise towards unlock direction and open the bottom cover, take out the filter.
• Removing the packaging from the filter, put it into the device.
• Rotate clockwise to lock the bottom cover and place the device on a stable area after that.
• Insert the adapter into the socket. After the device is powered on, press the power button to turn on the device. Press and hold the timer button for 5 seconds to reset check filter timer.

Note: The used air filter contains contaminants collected from the air. Do not touch the filter cotton directly or smell the filter.

Troubleshooting

After sales service

1. Free one-year warranty.
2. After the free warranty, you can contact the company to provide maintenance services.
3. The following conditions are not covered by the warranty
   a. Damage due to man-made factors
   b. Damage due to unauthorized disassembly or repair
   c. Normal wear and tear after usage
   d. Filter (unless the filter is damaged before using)
   e. Damage due to improper installation and usage

Note: In order to protect your rights, please pay attention to the following information.

1. Please register your purchase online with a complete, correct and authentic information within 30 days after purchase to get a one-year free warranty.
2. Keep the purchase receipt or record.
3. Terms and details for the warranty are listed on the online registration page.

After sales warranty

Please visit https://airlab-tech.com/ within 30 days after purchase to register your product to get a one-year warranty

1. Warranty terms
   a. From the date of purchase, the warranty period is 1 year, during which maintenance service is free of charge (except for force majeure events, external factors).
   b. The complimentary gift (if any) is not covered by the warranty.
   c. Purchase receipt, shopping records issued by the company, and receipt are all acceptable.
   

2. Spare parts
   Spare parts are provided free of charge during the warranty and charged according to the market prices at the time after the warranty. The filter is not considered as a spare part. Free warranty is not applicable to filter unless it is damaged.
   

https://airlab-tech.com/

11H, Golden Bear Industrial Building, 66-82 Chai Wan Kok Street,
Tsuen Wan, NT, Hong Kong

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>