Shenzhen Wireless Cloud Image Electronics W20 Magnetic Wireless Charger User Manual
- June 6, 2024
- Shenzhen Wireless Cloud Image Electronics
Table of Contents
work in progress
W20 Magnetic Wireless Charger
80mm
80mm
W20
W20
User Manual
Thank you for purchasing our product. Please read this manual carefully before
use.
-
W20 USB C QC5V/9VPD5V/9V 3mm QiBPP-5WEPP-15WSamsung 10W 0-35
-
1 1
USB C
*1 -
1.USB CUSB C; 2.
iPhone12
iPhone12
iPhone12 Case iPhone12
1.iPhone12 2. 3.PDQC18WUSB C
- 1. 2. 3. 4. 5.
FCC
FCC15B – –
1.Specification
NameMagnetic Wireless Charger ModelW20 Colorwhite Charging PortUSB C Input
Voltage: QC(5V/9V),PD(5V/9V). Effective Charging Distance3mm FOD(Foreign
Object Detect)yes Protectionover-voltage, over-current, short-circuit, over-
temperature. CompatibilityQi(BPP-5W,EPP-15W), Samsung 10W. Operating
Temperature0-35
2.What’s included
Wireless Charger1 User Manual1 Packing Box*1 wireless charger panel
3.How to use
1.Connect the USB-C cable to the USB-C power adapter. 2.Place the phone onto
the wireless charger panel.
iPhone12
iPhone12
iPhone12 Case iPhone12
Horizontal charge
Magenetic Charge
Charge without removing the phone case
Notice
1.The magnetic charging only works on iPhone12 series, the phones
without magnets built in can not use the magnetic charging feature.
USB C
2.It’s highly recommended to use the original Apple phone case if you
want to charge your phone without removing the phone case. Because
the thickness of phone case affects the effectiveness of magnetic
charging.
3.The USB-C power adapter shall support PD or QC, output power 18W.
4.Tips
1.When charging,no metal objects a.re allowed between the phone and the
wireless charger TX. 2.The wireless charger panel is fragile material,
breaking it may lead to sharp pieces that will cause injuries. Use with care
to avoid injuries. 3.The charging efficiency varies all the time to avoid
overtemperature that causes damage to the phone.
4.Do not use the product if water gets into the product, otherwise it may
cause short-circuit or fire. 5.Clean the product with a soft dry cloth, do not
use cosmetics, soap or corrosive detergent.
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or
television reception, which can be determined by turning the device off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: –Reorient or relocate the receiving antenna.
–Increase the separation between the device and receiver. –Connect the device
into an outlet on a circuit different from that to which the receiver is
connected. –Consult the dealer or an experienced radio/TV technician for help.
The distance between user and products should be no less than 20cm
.0%&
BCM0015-A00
4QFDJGJDBUJPO 320*80mm.128g
K
%8(/0
1″1&3
A3
4$”-&
6/*5
NN
4)&&5 1/1
1/ W20
.BUFSJBM$PEJOH
%3″8/
$)&$,&% “11307&%
%”5&
2020/11/3
%”5& %”5&