jaycar GT4291 WiFi FPV RC Car Instruction Manual

June 27, 2024
Jaycar

jaycar GT4291 WiFi FPV RC Car

Product Usage Instructions

  • When you receive your product, carefully unbox it and check for any damages. Make sure all the components are included as per the user manual. Follow the setup instructions provided to assemble the product correctly.
  • Before powering on the product, ensure it is connected to a compatible power source as specified in the user manual. Press the power button to turn on the device.
  • Refer to the user manual for detailed guidelines on how to use the product effectively. Follow all safety instructions and recommendations provided by the manufacturer.

Maintenance and Care

  • Regularly clean and maintain the product as per the maintenance instructions provided.
  • Avoid exposing the product to extreme temperatures or moisture.

FAQ

  • Q: What is covered under the warranty?
  • A: The warranty typically covers manufacturing defects and faults in materials. Refer to the warranty information provided by Electus Distribution for specific coverage details.
  • Q: How do I claim warranty service?
  • A: In case of any issues covered under warranty, contact Electus Distribution at the provided address and phone number to initiate a warranty claim process.

Specifications

  • Speed: Up to 20km/h
  • Frequency: 2.4GHz Digital
  • Remote Control Range: Up to 50m
  • Camera Resolution: 1080p (1920 X 1080)@ 25fps
  • microSD Capacity: Up to 32GB
  • Play Time: Up to 15 Minutes
  • Charging Time: Up to 2 Hours
  • Batteries:
    • Car: 1 x 7.4V Li-ion, S00mAh (Included)
    • Remote: 4 x AA (Not Included)
  • Dimensions: 31 S(L) x 193(W) x 120(H)mm

Product Diagram

jaycar-GT4291-WiFi-FPV-RC-Car-FIG-1

Trimming Settings

  • When the car is moving to the left, adjust the trim to the right. Until the car returns to a straight line.
  • When the car is moving to the right, adjust the trim to the left. Until the car returns to a straight line.

Battery Installation

  1. 0pen the battery cover, Follow Picture 1 to install 4 AA batteries into the remote control and then cover the battery cover.
  2. Open the battery cover and plug the battery pack into the vehicle’s power port as shown in Picture 2.
  3. Load the battery pack into the battery box and then cover it.

jaycar-GT4291-WiFi-FPV-RC-Car-FIG-4

Operation

  1. Forward: pull down the accelerator and drive the vehicle forward. Adjust the throttle force to control the speed of the vehicle.jaycar-GT4291-WiFi-FPV-RC-Car-FIG-5
  2. Reverse: push the throttle forward and the remote control car backward. Adjust the throttle to control the speed of the remote control car.
  3. Go forward and turn left: pull down the gas pedal while turning the left steering wheel.jaycar-GT4291-WiFi-FPV-RC-Car-FIG-6
  4. Go forward and turn right: pull down the gas pedal while turning the left steering wheel.
  5. Reverse and turn left: push the throttle forward while turning the steering wheel to the left.jaycar-GT4291-WiFi-FPV-RC-Car-FIG-7
  6. Reverse and turn right: push the throttle forward while turning the steering wheel to the right.

USB Charging

  • Remove the battery from the car, Connect the USB charging cable to the computer USB interface, while Another section is connected to the battery port.

Tips: The USB light is on when charging. USB lights out when full. The charging time is 120-150 minutes.

Safety

  • When the car is moving, please do not touch the four wheels of the remote control car with your hands to avoid the risk of twisting and cutting.
  • When the power of the remote control or remote control car is insufficient, the remote control distance will be affected, and there will be a situation where the driving is too slow or the climbing is difficult.
  • Don’t let the remote control car fall or crash heavily, so as not to damage the remote control car or shorten the life of the remote control car.
  • Don’t play on roadsides, puddles, dirt or other dangerous places to avoid danger.
  1. If not using this product for a long time, please remove the battery to avoid leakage or damage to the product.
  2. Use a damp cloth to gently wipe the car.
  3. Don’t put the toys on the high temperature, moisture, and direct sunlight.
  4. Don’t put toys in water, which may cause damage to electronic components.
  5. Products sold Once, any security problems produced by the operation and use, control, and other aspects, not be responsibility of the factory.
  6. In case of any problems such as use, operation and maintenance, technical support, and after-sales service, Please contact the local distributor.

Camera Installation

jaycar-GT4291-WiFi-FPV-RC-Car-FIG-9

APP Download and Install

  • Scan the below QR code to download.

App Name: HENGQI PLAY

  1. Connect the camera to the car, and the camera indicator light keeps on.
  2. Go to your phone’s Settings and find the WIFI list called “WiFi FPV Car” and connect. (see shown picture)
  3. OART inter Pacithe APP interface, If connected correctly, you can see the FPV on the interface and Start to control it.

Tips: Camera image transmission distance is 20-30 meters, when using mobile phone control, it is recommended to control the model car by video shooting within 10 meters. Suggest to control by remote for the beginners.
Warning: When the battery voltage is too low, the camera automatically disconnects and enters the automatic protection state.

Battery Safety

  • The use of batteries has certain risks, it may cause personal injury or property damage.
  • Use only factory-supplied chargers. Before cleaning the model, make sure the model is disconnected from the charger.
  • Do not charge or use the swelling, leaking, or damaged battery.
  • Do not overcharge the battery. When the battery is fully charged, pull out the charge. After the charge is complete, do not recharge to avoid overheating.
  • Do not charge near combustible or flammable(carpet, wood floor, solid wood furniture, etc.) or on the surface of conductive objects. Should observe the battery at any time.
  • Don’t charge when the battery is still hot.
  • The temperature of the battery is between O C and 40 C.
  • Pull out the charger when not charged.
  • Do not use plastic packaging that has damaged batteries.
  • When the product is turned on, do not insert or remove the battery.
  • Do not allow the battery to excessive physical shock.
  • Do not use the expansion, leakage, breakage, or emits an odor of the battery.
  • Children’s contact with battery is prohibited.
  • Do not put a battery into the fire, to avoid contact with liquid, the model can not be exposed to the rain, and should not be placed in a damp place.
  • Please do not remove the battery or cut, or drill. The battery or charger can not carry heavy things. Do not knock the battery.
  • Do not use solvents, alcohol, or other flammable solvents to clean the charger.
  • Prevent the short circuit. Avoid direct contact with the electrolytic material of the battery, electrolytic material and electrolytic steam is harmful to the body.

Warranty Information

  • Our product is guaranteed to be free from manufacturing defects for 12 Months.
  • If your product becomes defective during this period, Electus Distribution will repair, replace, or refund where a product is faulty; or not fit for the intended purpose.
  • This warranty will not cover modified products; misuse or abuse of the product contrary to user instructions or packaging label; change of mind and normal wear and tear.
  • Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and failure does not amount to a major failure.
  • To claim a warranty, please contact the place of purchase. You will need to show receipt or other proof of purchase. Additional information may be required to process your claim.
  • Any expenses relating to the return of your product to the store will normally have to be paid by you.
  • The benefits to the customer given by this warranty are in addition to other rights and remedies of the Australian Consumer Law concerning the goods or services to which this warranty relates.
  • This warranty is provided by: Electus Distribution
  • Address 46 Eastern Creek Drive, Eastern Creek NSW 2766 Ph. 1300 738 555

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals