SHOPPERS STOP MPD668 BT Speaker User Manual
- June 25, 2024
- Shoppers Stop
Table of Contents
SHOPPERS STOP MPD668 BT Speaker
Usage Instructions
- To play music, pair the device with a BT device and ensure a working distance of 10M.
- Press short for the next song/next FM station during music playback. Press long to turn up the volume.
- Press short for the last song/last FM station during music playback. Press long to turn down the volume.
- To play music from a TF card or UD disk, insert the storage device into the appropriate slot.
- To use the hands-free phone call function, ensure the device is connected to a compatible phone via BT.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to certain conditions as outlined in the manual.
RF Warning
The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
FAQ
Q: How do I pair the device with a BT device?
A: To pair, turn on the device’s BT function and search for available devices on your BT-enabled device. Select the appropriate device name to establish a connection.
Q: Can I use the device for hands-free phone calls?
A: Yes, the device has a built-in microphone for a hands-free phone call function when connected to a compatible phone via BT.
Pairing With BT Devices
When you power on the speaker, it is already on the BT mode. Once the speaker is turned on please go to your smart device/cell phone and search to connect to BT. You should see the option to connect to “MPD668” Please select it and you should be connected. Once the speaker is switched on, it will automatically connect with the last paired BT device within the range.
Accessories included:
- A charging cable, an Aux 3.5mm cable
Product specifications
- BT: 5.3
- Working distance: 10M
- SNR: ≥95db
- Battery:3.7V 1500mAh
- Normal volume playing time: 2H
- Speaker driver: ® 52 mm*2
- Power: 42/8W *2
- Frequency response: 120Hz-18KHz
- Unit size: 235mm99mm110mm
- Unit weight: 835g
- Charging: 5V/1000mA
Product Feature
- International advanced BT chip and circuit design techniques, support all BT devices;
- Built-in Low-freq radiators, Super dynamic low-frequency sound pressure gain, listening transparent and flexible.
- Can play music after pairing with BT device for example mobile/ MID/ TV, the working distance is more than 10M.
- Support AUX IN audio input
- Built-in MP3 decoding, can directly play TF card, U disk
- Build-in the FM radio module, convenient to auto-scan and save radio channels.
- With Mic for hands-free phone call function.
- Support TWS
key & slot function
- TF slot: it can decode and play MP3/WAV format audio when putting the TF card into the slot
- DC 5V charging slot: use the standard TYPE-C charging cable for power charging.
- AUX: it can play audio via a 3.5mm AUX cable to an audio device
- USB slot: it can decode and play MP3/WAV format audio when put USB card into the slot
- When playing music, press short for the option of the LED flashing light, and press long to open/close.
- Power switch : Press long for power on /power off; press short to switch model(USB card/TF card/BT/ FM) and switch to “line in” if via AUX cable to the audio device.
- When playing music,(USB card/ TF card/LINE IN/BT), short press for “play/pause”. Under BT mode with mobile paired, when a call comes, press short to answer a call hands-free, press again to hand up, and press twice to ring up a call.
- When playing music, press short for the next song/next FM station, and press long to turn up the volume.
- When playing music, press short for the last song/last FM station, and press long to turn down the volume.
How to use the Radio
- Press short to enter FM mode, and press short to search the station automatically. Press it again to stop searching and save the channels.
- Press short “+/-” to navigate up/ down through saved channels.
- You may inset the aux cable which will help to get a stronger radio signal.
How to connect two speakers using the TWS function
- Keep the two speakers under Wireless mode without pairing, and press the “M” key for 4 seconds on either of the speakers until hear a hint, now it is TWS mode.
- Press the “M” key for 4 seconds on either of the speakers to stop TWS after disconnecting the wireless.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used under the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable devices:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.