Honeywell HLSPS25 Power Supply Instruction Manual
- June 25, 2024
- Honeywell
Table of Contents
HLSPS25 Power Supply
Product Information
Specifications:
- Model: HLS PS
- Variants: HLSPS25, HLSPS50
- Manufacturer Part Number: HW_MN-DT-1305_Addendum REV.0 22/04/24
Product Usage Instructions: Connection Guidelines:
When connecting a consumer/load to power supply HLSPS25 or HLSPS50, ensure
that both the positive and negative leads of the same consumer/load are
connected to the same output port PSO1 or PSO2 from the power supply.
Frequently Asked Questions (FAQ):
Q: What should I do if one of the consumers/loads experiences a fault?
A: In case of a fault on one consumer/load connected at an output port,
disconnect all other consumers/loads connected in parallel at that port to
prevent cutoff due to the fault.
Power Supply Addendum on Load Connection
- When connecting a consumer/load to power supply HLSPS25 or HLSPS50, it is mandatory to have both leads, positive lead and negative lead, of the same consumer/load connected at the same output port PSO1 or PSO2 from power supply. See Picture 1.
- Total current consumption needs to be calculated and checked with HLSPS manual values, when connecting multiple consumers on same output port to avoid the output cutoff in case of overcurrent.
- For multiple consumers/loads connected at the same output port is necessary to be noted that in case of a fault, overcurrent draw, short-circuit, etc, on at least one of the consumers/loads, all other consumers/loads connected in parallel at the respective port will be cutoff since the output port of power supply will be interrupted due to respective fault. See Picture 2.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>