FISHER AND PAYKEL CG305DNGX1 N 30 Inch Gas on Steel Cooktop User Guide

June 24, 2024
FISHER and PAYKEL

FISHER AND PAYKEL CG305DNGX1 N 30 Inch Gas on Steel Cooktop

FISHER-AND-PAYKEL-CG305DNGX1-N-30-Inch-Gas-on-Steel-Cooktop-
PRODUCT

Product Usage Instructions

  • Ensure the cooktop is correctly installed and connected to the gas supply.
  • Place the small pan support or wok stand on the desired burner as needed for your cooking style.
  • To ignite a burner, turn the control dial to the desired burner and push in while turning to the “Ignite” position.
  • Adjust the flame intensity by turning the control dial to your desired heat level.
  • For the wok burner, utilize the Innovalve™ technology for precise temperature control with 180-degree gas valve rotation.

Cleaning and Maintenance

  1. Allow the cooktop to cool down before cleaning.
  2. Remove the cast iron grates and trivets for easy access to clean the stainless steel components.
  3. Clean the cooktop regularly to maintain its performance and appearance.

FAQ

  • Are replacement parts available for this cooktop model?
  • Yes, replacement parts for this cooktop model are available through Fisher & Paykel’s Customer Care Centre. Contact them for assistance.
  • How often should I clean the cooktop?
  • It is recommended to clean the cooktop after each use once it has cooled down to prevent buildup and maintain optimal performance.

Put on a wok, set a small pan to a simmer, or sear a steak. There’s plenty of room for your cooking creativity.

  • Five burners including a wok burner
  • Auto re-ignition means if the flame goes out it will automatically re-light for safety

DIMENSIONS

Height 2 5/16″
Width 29 17/32″
Depth 20 7/8″

FEATURES & BENEFITS

Easy Handling
With flat cast iron grates, pots, and pans can easily be slid across elements, coming in handy in busy cooking environments.
Safe And Sound
The Auto-reignite system means you don’t have to hold down a dial while burners ignite – if a burner goes out it is automatically relit at the original flame setting.
Complementary design
The brushed stainless steel and polished metal trim has been designed for durability but also provides a modern, stylish finish, matching the Fisher & Paykel family of kitchen appliances.
Easy Cleaning
The stainless steel component is easily accessible and quick to clean. Cast iron trivets provide a durable and stable cooking platform. Their rubber feet prevent them from scratching the cooktop.
Handy Accessories
This cooktop comes with a small pan support and a wok stand to complement different cooking styles.
Precise control
Simply turn the dials to ignite the flame quickly and safely. Innovalve™ technology allows you to adjust the flame with 180-degree gas valve rotation for super-accurate temperature control.

SPECIFICATIONS

Accessories

Small pan support
Wok stand

Burner ratings

Auxiliary burner (natural gas) 700 – 3500BTU
Max burner power Yes
Rapid burner (natural gas) 1900 – 11500BTU
Semi-rapid burner (natural 1000 – 8500BTU
Wok burner (natural gas) 19000BTU

Burners

Number of burners 5
Wok burner

Cleaning

Easy clean cooktop design
Quick component removal

Controls

Ergonomic control dials
Laser etched graphics
Turned stainless dials

Performance

Both LPG & NG models
Electronic ignition
Quick connect gas valves
--- ---

Power requirements

Amperage 1A
Supply frequency 60Hz
Supply voltage 110-120V

Product dimensions

Depth 20 7/8″
Height 2 5/16″
Width 29 17/32″

Zones

Number of elements 5
SKU 81459
--- ---

The product dimensions and specifications on this page apply to the specific product and model. Under our policy of continuous improvement, these dimensions and specifications may change at any time. You should therefore check with Fisher & Paykel’s Customer Care Centre to ensure this page correctly describes the model currently available. Fisher & Paykel Appliances Ltd 2020

Where applicable: All appliances use energy, and energy usage typically generates carbon emissions. Fisher & Paykel Appliances’ In-use Energy Carbon Emissions Estimate indicates carbon emissions from a product’s in-use energy. This is calculated either annually or per cycle, using the product’s market- specific energy label energy consumption data multiplied by the carbon emissions factor for energy in your country or region. Our In-use Energy Carbon Emissions Estimate is designed to assist customers in making informed purchasing decisions when comparing different Fisher & Paykel products. For example, a heat pump dryer typically has a lower In-use Energy Carbon Emissions Estimate than a vented dryer.

Other product downloads available at fisherpaykel.com

A PEACE OF MIND SALE

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

FISHER and PAYKEL User Manuals

Related Manuals