adesso WKB-7300CB Wireless Keyboard and Mouse Combo User Guide
- June 22, 2024
- Adesso
Table of Contents
- adesso WKB-7300CB Wireless Keyboard and Mouse Combo User Guide
- Product Information
- Product Usage Instructions
- CONTENTS
- MOUSE DESCRIPTION
- INSTALLATION
- INTRODUCTION
- FEATURES
- Pairing Method
- KEYBOARD DESCRIPTION
- FCC Caution
- LIMITED WARRANTY
- FAQ (Frequently Asked Questions)
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
adesso WKB-7300CB Wireless Keyboard and Mouse Combo User Guide
Product Information
Specifications
- Model: WKB-7300CB
- Wireless Technology: 2.4GHz
- Wireless Range: Up to 30 feet (10m)
- Battery Type: Built-in Polymer (Rechargeable)
- Battery Life: Up to 100 hours (continuous use) / Up to 30 days (standby mode)
- Keyboard Dimensions: 4.2 x 2.5 x 1.5 inches (105 x 64 x 38 mm)
- Weight: 0.18 lbs (80g)
Product Usage Instructions
Installation
- Turn ON your computer and plug in the USB receiver into an available USB port.
- Turn ON the keyboard and mouse.
Charging the Battery
- Insert the Type-C USB Charging Cable Connector into the Type-C USB charging port on the Keyboard and/or Mouse.
- Insert the USB end of the Type-C USB Cable into the USB port of your computer or a 5V USB power adapter.
Pairing Method
- Ensure the receiver is paired with the keyboard and mouse.
- If re-pairing is needed:
- For the keyboard: Turn ON your device, plug in the USB receiver, turn ON the keyboard, move it near the receiver within 1 foot, press ESC + K within 15 seconds. The LED will blink during pairing and stop blinking when paired.
- For the mouse: Repeat the same setup as for the keyboard but press the middle and right keys instead.
CONTENTS
- Keyboard and Mouse
- USB Receiver
- TYP-C Cable
- Quick Start Guide
MOUSE DESCRIPTION
INSTALLATION
Turn ON your computer and plug the USB receiver into your computer or device’s available USB port. The system will automatically load the USB receiver is plug and play feature.
INTRODUCTION
Adesso” CyberTouch”™ WKB-7300CB 2.4GHz Wireless Keyboard Combo is ideal for the home, office, or while on the go with an advanced Optical Mouse. This keyboard combo features multi-functional hotkeys which can quickly access media players, multimedia controls, and Internet browser commands.it is designed with a slim and low-profile Scissor-Switch Technology for comfort, speed, and a better tactile feel. This keyboard also has a built-in lithium polymer rechargeable Battery which can be recharged via USB cable for long extended use.
FEATURES
Keyboard Specifications
- Keyboard Layout: 104-Key US layout
- Connection: 2.4GHz Wireless
- Working Range: 30 feet (10m)
- Battery: Built-in Polymer (Rechargeable)
- Hotkeys: Up to 100 hours (continuous use)/Up to 30 days (standby mode) 13 Hotkeys (CoPilot,Home, Back, Forward, Email, Search, Play/Pause, Stop,Previous Track, Next Track, Volume Up, Volume Down & Mute )
- Keyboard Dimensions: 16.25 x 4.75 x 0.50″ (436 x 122.8 x 11 mm)
- Keyboard Weight: 1.4 Lbs (625g)
Mouse Specifications
- Connection: 2.4GHz Wireless
- Sensor: Optical
- DPI: 800/1200/1600
- Working Range: 30 feet(10m)
- Battery: Built-in Polymer(Rechargeable)
- Mouse Dimensions: 4.2 × 2.5 x 1.5″ (105 x 64 x 38 mm)
- Mouse Weight: 0.18 Lbs (80g)
REQUIREMENTS
- • Platform: Windows® 8 and above Mac os 10.4 and above
• Connnectivity Technology: 2.4GHz wireless
CHARGING THE BATTERY
1. Insert the Type-C USB Charging Cable Connector into the Type-C USB
charging port at top of the Keyboard and/or Mouse.
2. Insert the USB end of the Type-C USB Cable into the USB port of your
computer or any 5V USB power adaptor.
Pairing Method
The receiver was paired with keyboard and mouse in advance, below is the pairing method in case it needs re-pairing.
- a. Turn ON your available device and plug the USB receiver, Turn ON the keyboard and move it near receiver within 1 foot, press ESC + K in 15 seconds, the LED will blinking when pairing and Stop blinking paired.
- b. The same setup for the mouse, except press middle and right key instead.
KEYBOARD DESCRIPTION
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable devices:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
LIMITED WARRANTY
Adesso provides a one year limited warranty for all of its products against
defects in material and workmanship.
During this period, Adesso will repair or replace any product which proves to
be defec-tive. However, Adesso will not warranty any product which has been
subject to improper freight handling, shipping abuse, neglect, improper
installation or unauthorized repair. The warranty will not cover products
installed with components not approved by Adesso and products where the sealed
assembly trace has been broken.
If you discover a defect, Adesso will, at its option, repair or replace the
product at no charge to you provided you return it during the warranty period
with freight charges pre-paid to Adesso. Before returning any product, you
must obtain a Return Merchan-dise Authorization number (RMA). This RMA # must
be clearly marked on the outside of the package you are returning for warranty
service. Be certain to also include your name, shipping address (no PO Boxes),
telephone number, and a copy of the invoice showing proof of purchase in the
package.
SUPPORT
We have listed most of our FAQ’s (Frequently Asked Questions) at: http://www
.ades-so.com/faqs.asp. Please visit our FAQ Service & Support pages before
you contact our E-mail or Telephone Support.
Email Support: If our FAQ’s do not help you resolve your issues, please email
support@adesso.com
Telephone Support:
Toll Free: 800-795-6788
9:00AM to 5:00PM PST Monday – Friday
FAQ (Frequently Asked Questions)
Q: What is the warranty coverage for Adesso products?
A: Adesso provides a one year limited warranty against defects in material and workmanship. The warranty does not cover products subjected to improper handling, neglect, installation, or unauthorized repair.
Q: Where can I find support for Adesso products?
A: Visit Adesso’s FAQ Service & Support pages at http://www.adesso.com/faqs.asp. For further assistance, you can contact support via email at support@adesso.com or by calling toll-free at 800-795-6788 during business hours.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>