ADESSO Xtream P500 Bluetooth Stereo Headset with Built-in Microphone User Guide

: June 7, 2024
: Adesso

Table of Contents

INTRODUCTION
- Features
- Requirements
CONTENTS
DESCRIPTION
GETTING STARTED
TROUBLESHOOTING
LIMITED WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ADESSO Xtream P500 Bluetooth Stereo Headset with Built-in Microphone

INTRODUCTION

The Adesso Xtream P500 is a single ear Multimedia Bluetooth Headset with Microphone that’s lightweight, stylishly designed for active lifestyles. Bluetooth connectivity ensures high-quality audio, long battery life, and support for a variety of devices.

Features

Connection	Bluetooth 5.0+EDR and Standard 3.5mm plug
Wireless Range	> 32 feet (10m)
Unit Driver	High quality 40mm speaker
Frequency	20Hz-20KHz
Sensitivity	105dB ± 3dB
Impedance	32ohm
Battery	3.7V 200mAh
Music Playing Time	5 Hrs
Stand By Time	300 Hrs
Built-in Mic	Omnidirectional
Net Weight	0.43lbs (195g)

Requirements

Available USB port
Bluetooth enabled device

DESCRIPTION

GETTING STARTED

BLUETOOTH

Make sure the headset is in the off state by checking the power LED,
there should be no LED on.
Press and hold the multifunction button for 7 seconds until the red and
blue LED start flashing.
Follow the operating instructions of your Bluetooth device to start the
pairing process, typically this is done by going to a “Connect” or “Setup” menu and then selecting the option to search the Bluetooth devices.
The device will find Xtream P500 and ask whether you are willing to connect to the headset. Press “Yes” or “Confirm” to confirm this action.
Enter pin 0000, and press “Yes” or “Confirm”. If the connection was successful the blue LED will flash 3 times.

WIRED MODE

Insert the 3.5MM cable into the AUX port to use the device as a wired headphone.

TF CARD MODE

Insert the Micro SD / TF card to the slot, and play music directly from
the headset as a media player.

TROUBLESHOOTING

What if the headphones will not power on?

If the headphones will not power on after turning on the power button, please ensure the headphones has been fully charged and try powering the headphones on again.

What if the headphones will not charge?

If the status LED does not turn red when you plug in the charging cable, please try charging the headphones by connecting it to a different USB power source.

What if I’m unable to pair to headphones?

If you are not able to pair to the headphones, please try disabling Bluetooth on your device. Power off the headphones, then power on the headphones. Then, enable Bluetooth on your device. The headphones will appear as Xtream H500, click or tap on it to pair

What if I hear no sound through headphones after pairing?

If you do not hear sound through your headphones, make sure the sound on your device is not muted and turned up.

LIMITED WARRANTY

Adesso provides a one year limited warranty for all of its products against defects in material and workmanship.

During this period, Adesso will repair or replace any product which proves to be defective. However, Adesso will not warranty any product which has been subject to improper freight handling, shipping abuse, neglect, improper installation or unauthorized repair. The warranty will not cover products installed with components not approved by Adesso and products where the sealed assembly trace has been broken.

If you discover a defect, Adesso will, at its option, repair or replace the product at no charge to you provided you return it during the warranty period with freight charges pre-paid to Adesso. Before returning any product, you must obtain a Return Merchandise Authorization number (RMA). This RMA # must be clearly marked on the outside of the package you are returning for warranty service. Be certain to also include your name, shipping address (no PO Boxes), telephone number, and a copy of the invoice showing proof of purchase in the package.

OTHER LANGUAGES